Upload Button Icon Add office photos

Filter interviews by

Abdullah A. Al-Barrak & Sons Interview Questions and Answers

Updated 1 Feb 2025

Abdullah A. Al-Barrak & Sons Interview Experiences

Popular Designations

6 interviews found

Interview experience
1
Bad
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected
Round 1 - One-on-one 

(2 Questions)

  • Q1. Basic planning Engineer question
  • Q2. Basic

Interview Preparation Tips

Interview preparation tips for other job seekers - Incompetent management.

Senior Planning Engineer Interview Questions asked at other Companies

Q1. What is MIS? and how it prepare.
View answer (1)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
-
Result
Selected Selected

I applied via Walk-in

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Heat exchanger maintenance procedure
  • Ans. 

    Heat exchanger maintenance involves regular cleaning, inspection, and testing to ensure optimal performance and prevent breakdowns.

    • Regularly clean the heat exchanger tubes to remove any buildup of dirt, debris, or scale

    • Inspect the heat exchanger for any signs of corrosion, leaks, or damage

    • Perform pressure tests to check for any leaks or weaknesses in the system

    • Replace any worn out or damaged parts to prevent further da...

  • Answered by AI

Mechanical Supervisor Interview Questions asked at other Companies

Q1. What you will do if any person injured inside confine space?
View answer (2)
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Mar 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. About coating abaut blasting qaulity regarding test
Round 3 - HR 

(1 Question)

  • Q1. Sallery confirmation agreement and company policy

Interview Preparation Tips

Interview preparation tips for other job seekers - Please make preparation about job and releted field

Painting Supervisor Interview Questions asked at other Companies

Q1. What is the blasting nozzle size
View answer (3)
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. What is hydrotesting job
  • Ans. 

    Hydrotesting is a process of testing the strength and integrity of a pipeline or vessel by filling it with water or another liquid.

    • Hydrotesting is done to ensure that the pipeline or vessel can withstand the pressure it is designed for.

    • During hydrotesting, the pipeline or vessel is filled with water or another liquid and pressurized to a level higher than its normal operating pressure.

    • The pressure is held for a specifi...

  • Answered by AI
  • Q2. What process of floating type heat exchanger
  • Ans. 

    A floating type heat exchanger is a type of heat exchanger that uses a floating head to allow for thermal expansion.

    • The floating head allows for thermal expansion and contraction of the tubes without damaging the shell or tubesheet.

    • This type of heat exchanger is commonly used in high temperature and high pressure applications.

    • Maintenance of the floating head is important to ensure proper operation and prevent leaks.

    • Exa...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - This company is good for Mechanical maintenance department in oil and Gas company.

Mechanical Supervisor Interview Questions asked at other Companies

Q1. What you will do if any person injured inside confine space?
View answer (2)

Abdullah A. Al-Barrak & Sons interview questions for popular designations

 Mechanical Supervisor

 (3)

 Painting Supervisor

 (1)

 QA QC Inspector

 (1)

 Senior Planning Engineer

 (1)

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Newspaper Ad and was interviewed before Mar 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Tell me about yourself
  • Ans. 

    I am an experienced QA QC Inspector with a strong attention to detail and a passion for ensuring quality in all aspects of my work.

    • I have a Bachelor's degree in Quality Assurance and have been working in the field for over 5 years.

    • I am skilled in conducting inspections, audits, and tests to identify and resolve quality issues.

    • I have a thorough understanding of industry standards and regulations, and I am adept at creat...

  • Answered by AI
  • Q2. Experience Details of your previous working
  • Ans. 

    I have 5 years of experience as a QA QC Inspector in the manufacturing industry.

    • Performed inspections on raw materials, in-process production, and finished products to ensure compliance with quality standards.

    • Conducted visual inspections, measurements, and tests using various tools and equipment.

    • Documented inspection results and prepared detailed reports.

    • Collaborated with production teams to address quality issues and ...

  • Answered by AI
Round 3 - Technical 

(3 Questions)

  • Q1. Basics about welding Inspection, painting Inspection, NDT Inspection
  • Q2. In-Service Inspection of Pressure vessel, Tanks, Heat Exchanger
  • Ans. 

    In-Service Inspection of Pressure vessel, Tanks, Heat Exchanger

    • In-service inspection involves assessing the condition of pressure vessels, tanks, and heat exchangers while they are in operation.

    • It is important to identify any potential defects or damage that could compromise the safety and functionality of these equipment.

    • Inspections may include visual examination, non-destructive testing, and monitoring of operating p...

  • Answered by AI
  • Q3. Damage Mechanisms of Static Equipments
  • Ans. 

    Damage mechanisms of static equipment refer to the various ways in which these equipment can deteriorate or fail over time.

    • Corrosion: The most common damage mechanism, caused by the reaction of metal with its environment.

    • Erosion: Occurs when the flow of fluid or particles causes the surface of the equipment to wear away.

    • Cracking: Can be caused by stress, fatigue, or material defects, leading to structural failure.

    • Cavit...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be bold and if you don't know the answer then tell frankly

QA QC Inspector Interview Questions asked at other Companies

Q1. What are the roles of the quality control?
View answer (2)
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Share your Exp. Related your Profile
Round 3 - Technical 

(1 Question)

  • Q1. Responsibility of Mech. Sup.
  • Ans. 

    The responsibility of a Mechanical Supervisor is to oversee and manage mechanical operations and maintenance activities.

    • Supervising and managing mechanical operations and maintenance activities

    • Ensuring compliance with safety regulations and standards

    • Developing and implementing maintenance schedules

    • Managing and training mechanical staff

    • Troubleshooting and resolving mechanical issues

    • Maintaining inventory of mechanical eq

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared for Designation your applying, keep trying,

Mechanical Supervisor Interview Questions asked at other Companies

Q1. What you will do if any person injured inside confine space?
View answer (2)

Interview questions from similar companies

I applied via Naukri.com

Interview Preparation Tips

General Tips: Daer team
I share my experience in shell
Shell like to follow the aquality and safety. Systems my experience in shell QATAR GTL project and tournament shutdowns my experience in static and piping
Skills: Analytical Skills, Presentation Skills
Duration: <1 week

I applied via Campus Placement and was interviewed in Nov 2020. There were 5 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Internships
  • Q2. Technical stuff

Interview Preparation Tips

Interview preparation tips for other job seekers - Great. Look for positive attitude and sincerity towards work

I applied via Campus Placement and was interviewed in Dec 2016. There were 2 interview rounds.

Interview Preparation Tips

Round: HR Interview
Experience: HR was really friendly and discussed resume in detail.

Round: Technical Interview
Experience: Had more discussion on technical terms on resume.

Round: Technical Interview
Experience: Asked questions on Programming and questions related to course work mentioned in the resume. The interview was completely candidate driven.

College Name: IIT Madras

I applied via Campus Placement and was interviewed in Dec 2016. There were 2 interview rounds.

Interview Preparation Tips

Round: HR Interview
Experience: HR was really friendly and asked about projects in the resume.

Round: Technical Interview
Experience: Interviewer asked questions related to programming and algorithms.

Round: Technical Interview
Experience: Interviewer asked all technical details inside the resume. This round was more technical. More emphasis was on problem solving skills.

College Name: IIT Madras

Abdullah A. Al-Barrak & Sons Interview FAQs

How many rounds are there in Abdullah A. Al-Barrak & Sons interview?
Abdullah A. Al-Barrak & Sons interview process usually has 2-3 rounds. The most common rounds in the Abdullah A. Al-Barrak & Sons interview process are Resume Shortlist, Technical and HR.
How to prepare for Abdullah A. Al-Barrak & Sons interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Abdullah A. Al-Barrak & Sons. The most common topics and skills that interviewers at Abdullah A. Al-Barrak & Sons expect are Aramco, Branch Operations, Construction Safety, Execution and Gas.
What are the top questions asked in Abdullah A. Al-Barrak & Sons interview?

Some of the top questions asked at the Abdullah A. Al-Barrak & Sons interview -

  1. In-Service Inspection of Pressure vessel, Tanks, Heat Exchan...read more
  2. What process of floating type heat exchan...read more
  3. Damage Mechanisms of Static Equipme...read more

Tell us how to improve this page.

Abdullah A. Al-Barrak & Sons Interview Process

based on 11 interviews

Interview experience

4.4
  
Good
View more

Interview Questions from Similar Companies

Shell Interview Questions
4.0
 • 192 Interviews
Bharat Petroleum Interview Questions
4.1
 • 149 Interviews
Schlumberger Interview Questions
3.9
 • 139 Interviews
bp Interview Questions
3.8
 • 61 Interviews
Baker Hughes Interview Questions
4.0
 • 54 Interviews
Petrofac Interview Questions
4.3
 • 41 Interviews
View all

Abdullah A. Al-Barrak & Sons Reviews and Ratings

based on 69 reviews

3.1/5

Rating in categories

3.0

Skill development

2.9

Work-life balance

3.2

Salary

3.1

Job security

2.6

Company culture

2.8

Promotions

3.0

Work satisfaction

Explore 69 Reviews and Ratings
Mechanical Supervisor
22 salaries
unlock blur

₹6 L/yr - ₹16.4 L/yr

Planning Engineer
8 salaries
unlock blur

₹10 L/yr - ₹28.5 L/yr

Mechanical Engineer
4 salaries
unlock blur

₹5.5 L/yr - ₹16 L/yr

Quality Engineer
4 salaries
unlock blur

₹2.4 L/yr - ₹4.2 L/yr

Facility Manager
4 salaries
unlock blur

₹16 L/yr - ₹19 L/yr

Explore more salaries
Compare Abdullah A. Al-Barrak & Sons with

Indian Oil Corporation

4.4
Compare

Shell

4.0
Compare

Bharat Petroleum

4.1
Compare

Hindustan Petroleum

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview