i
Vodafone Idea
Filter interviews by
I applied via Referral and was interviewed in Nov 2021. There were 2 interview rounds.
HO stands for Handover. It is a process of transferring an ongoing call or data session from one cell to another.
There are two types of HO: Intra-cell HO and Inter-cell HO
Intra-cell HO occurs when a mobile device moves from one channel to another within the same cell
Inter-cell HO occurs when a mobile device moves from one cell to another
Events in HO include HO Request, HO Access, HO Required, HO Command, and HO Complet
MCR stands for Maximum Cell Rate. It is the maximum rate at which cells can be transmitted through a network.
MCR is an important parameter in ATM (Asynchronous Transfer Mode) networks.
It is used to ensure that the network does not become congested.
MCR is determined by the network operator and is based on the capacity of the network.
Improving MCR can be done by increasing the capacity of the network or by optimizing the...
CQI stands for Channel Quality Indicator and MCS stands for Modulation and Coding Scheme.
CQI is a feedback mechanism used in wireless communication systems to indicate the quality of the channel.
MCS is a technique used to modulate and encode data for transmission over a wireless channel.
CQI and MCS are used together to optimize the transmission rate and quality of wireless communication.
Higher CQI values indicate bette...
Volte call flow is the process of establishing and maintaining a voice call over a 4G LTE network.
The call is initiated by the user and sent to the LTE network
The network sends a SIP invite message to the called party
The called party responds with a SIP 180 ringing message
Once the call is answered, the network sends a SIP 200 OK message
The voice call is established and maintained over the LTE network
Cell throughput refers to the amount of data transmitted by a cell, while user throughput is the amount of data received by a user.
Cell throughput is the total amount of data transmitted by a cell, including data sent to all users within the cell.
User throughput is the amount of data received by a single user within the cell.
Cell throughput is affected by factors such as the number of users, signal strength, and availa...
CA stands for Carrier Aggregation. It is a technology used in LTE networks to combine multiple frequency bands for higher data rates.
CA allows for faster data speeds by combining multiple frequency bands.
There are two types of CA: intra-band and inter-band.
Intra-band CA combines multiple carriers within the same frequency band.
Inter-band CA combines carriers from different frequency bands.
CA can be used in different co...
Interference is the unwanted signal that affects the quality of the desired signal.
Interference can be caused by external sources such as other wireless devices, power lines, or natural phenomena like lightning.
It can also be caused by internal sources such as reflections, multipath, or co-channel interference.
Types of interference include thermal noise, crosstalk, adjacent channel interference, and intermodulation int...
SIB stands for System Information Block. It is a type of message used in wireless communication systems.
SIBs contain information about the network, such as cell identity, location area code, and frequency.
There are different types of SIBs, including SIB1, SIB2, SIB3, SIB4, SIB5, SIB6, SIB7, SIB8, SIB9, SIB10, SIB11, and SIB12.
SIB1 is the most important SIB, as it contains information about the cell identity, frequency,...
Top trending discussions
I applied via Company Website and was interviewed before Feb 2021. There were 2 interview rounds.
Aptitude text
I was interviewed in Jan 2017.
The microprocessor 8085 has a total of 40 output pins.
The microprocessor 8085 is an 8-bit microprocessor.
It has a total of 40 pins, which are used for various purposes.
These pins include address bus pins, data bus pins, control pins, and power supply pins.
Some of the output pins are used for sending signals to external devices or peripherals.
Examples of output pins in the microprocessor 8085 include the RD (Read) pin a
I applied via Referral and was interviewed before Jan 2021. There was 1 interview round.
I applied via Recruitment Consultant and was interviewed in May 2019. There were 3 interview rounds.
I was interviewed before Sep 2016.
I have worked on various technologies including Java, Python, AWS, Docker, and Kubernetes.
Java
Python
AWS
Docker
Kubernetes
Daily operational activities case studies
Case study of optimizing production line for efficiency
Case study of implementing new safety protocols in a manufacturing plant
Case study of troubleshooting and resolving technical issues in a software development team
Case study of streamlining inventory management in a retail store
Case study of improving customer service processes in a call center
Project management is the process of planning, organizing, and overseeing the execution of a project from start to finish.
It involves defining project goals and objectives
Creating a project plan and timeline
Assigning tasks and responsibilities to team members
Monitoring progress and making adjustments as needed
Ensuring that the project is completed on time, within budget, and meets the desired quality standards
Examples ...
Financial and cost control is the process of monitoring and managing project expenses to ensure they stay within budget.
Developing a detailed budget plan
Tracking expenses and comparing them to the budget plan
Identifying and addressing cost overruns
Negotiating with vendors to get the best prices
Implementing cost-saving measures
Regularly reporting on financial status to stakeholders
Resource management is the process of planning, allocating, and optimizing resources to achieve organizational goals.
It involves identifying the resources needed for a project or task
Allocating those resources in an efficient manner
Monitoring and controlling resource usage to ensure optimal performance
Examples include managing personnel, finances, equipment, and time
Effective resource management can lead to increased p
2G, 3G, and 4G call flow are the processes involved in establishing and maintaining a mobile phone call.
2G call flow involves circuit-switched technology and uses Time Division Multiple Access (TDMA) for voice transmission.
3G call flow uses packet-switched technology and supports both voice and data transmission.
4G call flow uses Long-Term Evolution (LTE) technology and provides high-speed data transmission.
All call fl...
Single RAN is a network architecture that allows multiple wireless technologies to be supported on a single physical network.
Single RAN stands for Single Radio Access Network.
It enables multiple wireless technologies such as 2G, 3G, 4G, and 5G to be supported on a single physical network.
This reduces the need for multiple hardware and software components, resulting in cost savings and simplified network management.
Sing...
VOLTE stands for Voice over LTE. It is a technology that allows voice calls to be made over a 4G LTE network.
VOLTE uses IP packets to transmit voice calls over the LTE network
It provides better call quality and faster call setup times compared to traditional 2G/3G networks
VOLTE also allows for simultaneous voice and data usage on the same network
Examples of VOLTE-enabled devices include iPhone 6 and above, Samsung Gala...
LTE is a standard for wireless broadband communication while VoLTE is a technology that enables voice calls over LTE network.
LTE stands for Long-Term Evolution and is a standard for wireless broadband communication.
VoLTE stands for Voice over LTE and is a technology that enables voice calls over LTE network.
LTE is used for data transfer while VoLTE is used for voice calls.
VoLTE provides better call quality and faster c...
Transport network refers to the infrastructure that enables the movement of people, goods, and information.
Transport network includes roads, railways, airports, seaports, and communication networks.
It plays a crucial role in the economy by facilitating trade and commerce.
Examples of transport networks include the interstate highway system in the US and the European railway network.
Transport network planning involves op...
ABIS over IP and ABIS over TDM are two different methods of transmitting biometric data.
ABIS over IP uses internet protocol to transmit biometric data while ABIS over TDM uses time-division multiplexing.
ABIS over IP is more flexible and scalable than ABIS over TDM.
ABIS over TDM is more reliable and secure than ABIS over IP.
ABIS over IP is suitable for remote locations while ABIS over TDM is suitable for local networks.
...
2G, 3G, and 4G are mobile network technologies with different architectures.
2G uses circuit-switched technology and is primarily used for voice calls and text messaging.
3G uses packet-switched technology and offers faster data transfer rates than 2G.
4G uses all-IP packet-switched technology and provides even faster data transfer rates than 3G.
4G also supports advanced features like VoLTE and carrier aggregation.
Each ge...
I am a Senior engineer with 10+ years of experience in software development, specializing in backend systems and cloud technologies.
10+ years of experience in software development
Specialize in backend systems and cloud technologies
Strong problem-solving skills
Experience with large-scale distributed systems
Proficient in programming languages such as Java, Python, and Go
I have worked in various companies ranging from startups to large corporations, gaining experience in diverse technologies and industries.
Worked in a startup where I was responsible for developing a scalable backend system using Node.js and MongoDB.
At a mid-sized company, I led a team in implementing CI/CD pipelines for faster and more reliable software delivery.
In a large corporation, I worked on optimizing performanc...
I am impressed by the company's innovative projects and strong reputation in the industry.
Company's reputation for cutting-edge technology
Opportunity to work on challenging projects
Positive reviews from current employees
My notice period is currently 3 months, but it may be negotiable depending on the circumstances.
My current notice period is 3 months
I am open to negotiation depending on the circumstances
I can provide examples of when I have negotiated notice periods in the past
I applied via Walk-in and was interviewed in May 2024. There was 1 interview round.
I applied via Campus Placement and was interviewed in Jan 2023. There were 3 interview rounds.
Round 1 is a aptitude test is a technical
Yes, I am open to relocating for the position.
I am willing to relocate for the right opportunity
I am flexible and adaptable to new locations
I have relocated for previous positions and have had positive experiences
I am excited about the possibility of working with your team and contributing to the success of the company
I applied via Company Website and was interviewed before Oct 2022. There were 3 interview rounds.
This test knows about our communication skills, solving ability, grammar, mathematical ability, reading skills, listening skills and logical ability
OOPS (Object-Oriented Programming) concept is a programming paradigm based on the concept of objects, which can contain data and code.
OOPS focuses on creating reusable code and organizing it into objects
Key principles include encapsulation, inheritance, polymorphism, and abstraction
Encapsulation involves bundling data and methods that operate on the data into a single unit
Inheritance allows one class to inherit propert...
based on 17 reviews
Rating in categories
Assistant Manager
4.4k
salaries
| ₹0 L/yr - ₹0 L/yr |
Deputy Manager
3.9k
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
3.4k
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Executive
3k
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant General Manager
1.5k
salaries
| ₹0 L/yr - ₹0 L/yr |
Bharti Airtel
Jio
Bharat Sanchar Nigam
Tata Communications