Upload Button Icon Add office photos

Vestas

Compare button icon Compare button icon Compare

Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards

zig zag pattern zig zag pattern

Filter interviews by

Vestas Site Engineer Interview Questions and Answers

Updated 5 Jun 2022

Vestas Site Engineer Interview Experiences

2 interviews found

Site Engineer Interview Questions & Answers

user image Anonymous

posted on 14 May 2022

I applied via Naukri.com and was interviewed in Nov 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is impedance ,reacance
  • Ans. 

    Impedance is the total opposition to the flow of alternating current in a circuit, while reactance is the opposition to the flow of alternating current caused by capacitance or inductance.

    • Impedance is a combination of resistance and reactance in a circuit.

    • Reactance is the opposition to the flow of alternating current caused by capacitance or inductance.

    • Capacitive reactance is the opposition to the flow of alternating c...

  • Answered by AI
  • Q2. How calculate plant load factors
  • Ans. 

    Plant load factor is calculated by dividing the actual energy generated by the maximum possible energy that could have been generated.

    • Plant load factor = Actual energy generated / Maximum possible energy that could have been generated

    • Maximum possible energy is calculated by multiplying the rated capacity of the plant with the number of hours in a given time period

    • Plant load factor is expressed as a percentage

    • It is used...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Focus on fundamental, And answer with clear mindset

Site Engineer Interview Questions & Answers

user image Anonymous

posted on 14 May 2022

I applied via Company Website and was interviewed before May 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. What is impidance,DGR FUNDAMENTAL AND BASICS
  • Ans. 

    Impedance is the measure of opposition to the flow of electric current in a circuit. DGR fundamental refers to the Dielectric Withstand Voltage test.

    • Impedance is measured in ohms and is the combination of resistance, capacitance, and inductance in a circuit.

    • DGR fundamental is a test to determine the maximum voltage a material can withstand without breaking down.

    • Basics of impedance include understanding the relationship...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Clear basics fundamental of electrical

Site Engineer Interview Questions Asked at Other Companies

Q1. 1.BBS calculation of slab? 2.Stairs case riser and tread dimensio ... read more
Q2. What a term of Rolling margin on a steel?
Q3. Which type of pipe Line and it's standards following
Q4. design? 1.what is ASD in steel design? 2.what is special consider ... read more
Q5. What is the lapping zone of beam rebar at top and bottom...? Why ... read more

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Jan 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Transformers and generators at wtg questions
  • Q2. HT and WTG G-97 & G-114 wtg model questions

Interview Preparation Tips

Topics to prepare for ReNew Site Engineer interview:
  • Electricals
Interview preparation tips for other job seekers - My favorite wtg claiming doing hard work, good job holder at any work.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Apr 2023. There were 2 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. Discuss about your total experience and current working company
Round 2 - Technical 

(1 Question)

  • Q1. Asking about transmission line and power transformer testing and other technical questions
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Detailed Drawing
  • Q2. What is the unit weight of steel
  • Ans. 

    The unit weight of steel is typically around 7850 kg/m^3.

    • The unit weight of steel is commonly used in construction and engineering to calculate the weight of steel structures.

    • The unit weight of steel is typically around 7850 kg/m^3, but can vary depending on the type of steel.

    • For example, the unit weight of stainless steel is around 7480 kg/m^3, while the unit weight of carbon steel is around 7850 kg/m^3.

  • Answered by AI
Round 2 - HR 

(1 Question)

  • Q1. Discuss about CTC
  • Ans. 

    CTC stands for Cost to Company, which includes all expenses related to an employee's salary and benefits.

    • CTC includes salary, bonuses, benefits, and any other perks provided by the company.

    • It is the total amount of money a company spends on an employee in a year.

    • CTC is different from take-home salary as it includes all expenses incurred by the company for the employee.

    • Employer's contribution to PF, insurance, and other...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Constructive environment
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. TECHNICAL AND OTHER QUESTION
  • Q2. CIVIL REALETED AND GK QUESTION
Round 3 - Group Discussion 

GK AND OTHER KNOWLEDGE

Interview Preparation Tips

Topics to prepare for Adani Green Energy Site Engineer interview:
  • Civil Works
  • General Administration
  • Construction
Interview preparation tips for other job seekers - I WISH SELECTED MY JOB

I applied via Walk-in and was interviewed in Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. About salary breakups about current CTC:- Expected CTC:-

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview starts with full confidence not in over confidence. Keep your mind cool at time of interweaving

I applied via Approached by Company and was interviewed in Jul 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. All civil engineering construction into work site building construction
  • Q2. All civil engineering construction
  • Q3. RCC PCC into work from site experience on the civil engineering

Interview Preparation Tips

Interview preparation tips for other job seekers - Yes I am also told me that job with me civil engineering building construction All site work experience into Road & building work from site work

I applied via Campus Placement and was interviewed in Dec 2016. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. How is your project related to our company?
  • Ans. 

    My project involves developing a new software tool that aligns with your company's focus on innovative technology solutions.

    • My project utilizes similar technology and methodologies that your company specializes in.

    • The end goal of my project aligns with the mission and values of your company.

    • I have experience working with similar clients or industries that your company serves.

    • My project could potentially enhance or comp...

  • Answered by AI
  • Q2. What do you want to achieve
  • Ans. 

    I want to achieve continuous growth and development in my engineering career.

    • Continuous learning and upskilling in new technologies and tools

    • Contributing to innovative projects and solutions

    • Building a strong professional network

    • Advancing to higher positions within the engineering field

  • Answered by AI
  • Q3. Any suggestions from your friend side about your weakness
  • Ans. 

    My friend suggested that my weakness is being too detail-oriented.

    • Sometimes I get caught up in minor details and lose sight of the bigger picture

    • I may spend too much time perfecting a task instead of completing it efficiently

    • I tend to overanalyze situations which can lead to indecision

  • Answered by AI
  • Q4. Why dont you want to pursue higher studies
  • Ans. 

    I believe practical experience is more valuable than theoretical knowledge gained through higher studies.

    • I prefer hands-on learning and gaining real-world experience in the field.

    • I believe in continuous learning through on-the-job training and professional development.

    • I have already acquired the necessary skills and knowledge through my current work experience.

    • I want to focus on building my career and gaining practical...

  • Answered by AI

Interview Preparation Tips

Round: Technical Interview
Experience: they wanted to judge your technical skills

Round: HR Interview
Experience: They were interested in knowing about your attitude

College Name: IIT Madras

Interview Questionnaire 

10 Questions

  • Q1. Given a sample , how to predict life of the material?
  • Ans. 

    The life of a material can be predicted by analyzing its degradation over time and identifying the factors that contribute to it.

    • Conduct accelerated aging tests to simulate the effects of time on the material

    • Analyze the material's chemical and physical properties to identify potential degradation mechanisms

    • Consider external factors such as temperature, humidity, and exposure to light

    • Use statistical models to predict th...

  • Answered by AI
  • Q2. If you come to our company, and have an idea, people will oppose you, how will you implement it?
  • Ans. 

    I will listen to their concerns and address them with data and evidence to support my idea.

    • Listen to the opposing views and understand their concerns

    • Gather data and evidence to support my idea

    • Present the data and evidence to the team and address their concerns

    • Collaborate with the team to find a solution that works for everyone

    • Implement the idea with the support of the team

  • Answered by AI
  • Q3. Why are you working on Aluminium, particularly working on aging, how does ageing of 6061 alloys impact the fatigue life
  • Ans. 

    Aluminium alloys are widely used in engineering applications due to their high strength-to-weight ratio. Ageing of 6061 alloys can significantly impact their fatigue life.

    • Aluminium alloys are commonly used in aerospace and automotive industries due to their lightweight and high strength properties.

    • Ageing is a process of heat treatment that improves the strength and hardness of the alloy.

    • However, overaging can lead to a...

  • Answered by AI
  • Q4. ❖ Tell us about yourself?
  • Ans. 

    I am a highly motivated engineer with a passion for problem-solving and innovation.

    • I have a degree in mechanical engineering from XYZ University.

    • I have worked as a design engineer at ABC Company for 3 years.

    • I am proficient in CAD software such as SolidWorks and AutoCAD.

    • I have experience in project management and leading cross-functional teams.

    • I am constantly seeking to learn and improve my skills in the field of engine

  • Answered by AI
  • Q5. ❖ What does the word “humble” mean to you?,
  • Ans. 

    Humble means having a modest or low view of one's importance.

    • Humble people are not arrogant or boastful.

    • They are willing to learn from others and admit their mistakes.

    • Humble individuals do not seek attention or praise.

    • They are content with their achievements and do not feel the need to show off.

    • Being humble is a sign of strength, not weakness.

  • Answered by AI
  • Q6. ❖ you have already worked in Hyderabad, why don’t you look for a job there, why do you want to come to Pune?
  • Ans. 

    I am looking for better career opportunities and growth prospects in Pune.

    • Pune offers a wider range of job opportunities in my field of expertise.

    • I am looking for a change of environment and a new challenge.

    • Pune has a better standard of living and a more vibrant culture.

    • I have researched and found that Pune has a better work-life balance.

    • I am excited about the potential for professional growth and development in Pune.

  • Answered by AI
  • Q7. ❖ what did you learn from your parents and brother?,
  • Ans. 

    My parents taught me the value of hard work and my brother taught me the importance of perseverance.

    • My parents instilled in me a strong work ethic and the belief that anything is possible with dedication and effort.

    • My brother taught me to never give up, even in the face of adversity. He showed me that with persistence and determination, anything can be achieved.

    • From my family, I learned the importance of supporting eac...

  • Answered by AI
  • Q8. ❖ give some situations where you were a good team player, what have you done to improve yourself at IIT, apart from research,
  • Ans. 

    I have been a good team player in various situations and have improved myself at IIT through various activities.

    • During group projects, I ensured that everyone had a clear understanding of their roles and responsibilities.

    • I actively listened to my team members' ideas and suggestions and incorporated them into our work.

    • I provided support and assistance to my team members whenever they needed it.

    • Apart from research, I hav...

  • Answered by AI
  • Q9. ❖ If a team member is unable to carry out his work, he is doing it repetitively, how would you handle it?, would you like to work only on lifing of components, or would you be ready to shift to other depar...
  • Q10. ❖ When will you able to join?
  • Ans. 

    I will be able to join in 2 weeks.

    • I have to serve my notice period of 2 weeks at my current job.

    • I need to complete some pending tasks before leaving my current job.

    • I will need some time to relocate to the new city where the job is located.

  • Answered by AI

Interview Preparation Tips

Round: Technical Interview
Experience: As I was working on metal forming, I was asked that
how would that help in improving life of material, if I had done any modelling,
was asked about die design used in my project, commercial application of my
research, basic questions on fatigue. I was asked questions on my work
experience.then,They asked me to ask them questions- I asked
Research goes on very slowly-how to quantify results of researchers.

Round: HR Interview
Experience: - It was a stress round,

General Tips: 1st year- concentrate on CGPA. mostly companies
look for 8 and above.

2nd year- decide on which sector to enter, start
building your resume.

3rd year- build up on the above things and have
general knowledge, economic times(helpful in GDs)


2-3 sessions on iron and steel making and
physical metallurgy by BSM and metal forming in Uday Sir.(helpful for steel
companies)
Skill Tips: For Aptitude, CAT material was sufficient. For core, GATE material helped
College Name: IIT MADRAS

Vestas Interview FAQs

How many rounds are there in Vestas Site Engineer interview?
Vestas interview process usually has 1 rounds. The most common rounds in the Vestas interview process are Technical.
What are the top questions asked in Vestas Site Engineer interview?

Some of the top questions asked at the Vestas Site Engineer interview -

  1. What is impidance,DGR FUNDAMENTAL AND BAS...read more
  2. How calculate plant load fact...read more
  3. What is impedance ,reaca...read more

Tell us how to improve this page.

Vestas Site Engineer Salary
based on 7 salaries
₹4 L/yr - ₹12.8 L/yr
95% more than the average Site Engineer Salary in India
View more details

Vestas Site Engineer Reviews and Ratings

based on 1 review

4.0/5

Rating in categories

4.0

Skill development

4.0

Work-life balance

3.0

Salary

4.0

Job security

3.0

Company culture

4.0

Promotions

3.0

Work satisfaction

Explore 1 Review and Rating
Engineer
274 salaries
unlock blur

₹3 L/yr - ₹10.6 L/yr

Senior Engineer
189 salaries
unlock blur

₹5 L/yr - ₹14.1 L/yr

Lead Engineer
186 salaries
unlock blur

₹9.7 L/yr - ₹28.6 L/yr

Assistant Lead Engineer
182 salaries
unlock blur

₹8.9 L/yr - ₹20 L/yr

Buyer
108 salaries
unlock blur

₹3.2 L/yr - ₹9 L/yr

Explore more salaries
Compare Vestas with

Suzlon Group

4.1
Compare

Inox Wind

3.7
Compare

GE Vernova

4.2
Compare

Siemens Gamesa Renewable Power Private Limited

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview