Upload Button Icon Add office photos

Vestas

Compare button icon Compare button icon Compare

Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards

zig zag pattern zig zag pattern

Filter interviews by

Vestas Service Engineer Interview Questions, Process, and Tips

Updated 18 Feb 2025

Top Vestas Service Engineer Interview Questions and Answers

Vestas Service Engineer Interview Experiences

5 interviews found

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview in Jan 2025.

Round 1 - Technical 

(4 Questions)

  • Q1. Cane related what is rediuse in WTG to Cane
  • Q2. How to failure coupling in Ganesa WTG
  • Ans. 

    Failure in coupling in Ganesa WTG can occur due to misalignment, wear and tear, or lack of lubrication.

    • Misalignment of the coupling can lead to failure, causing vibration and noise.

    • Wear and tear of the coupling components can result in reduced efficiency and eventual failure.

    • Lack of proper lubrication can cause increased friction and overheating, leading to coupling failure.

  • Answered by AI
  • Q3. 24 to 40 meeter
  • Q4. Quality issue there 0 max coupling
  • Ans. 

    The quality issue with 0 max coupling refers to a problem with the maximum coupling value in a system.

    • Investigate the root cause of the quality issue with 0 max coupling

    • Check for any software or hardware malfunctions causing the problem

    • Ensure proper calibration and maintenance of the system

    • Implement corrective actions to resolve the quality issue

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. What is your Current CTC
  • Ans. 

    My current CTC is $60,000 per year.

    • My current CTC is $60,000 per year

    • I am currently earning $5,000 per month

    • My total compensation package is $60,000 annually

  • Answered by AI
  • Q2. What is expected CTC
  • Ans. 

    My expected CTC is negotiable based on the job responsibilities and market standards.

    • My expected CTC is based on my experience, skills, and the job requirements.

    • I am open to discussing the compensation package during the interview process.

    • I am looking for a competitive salary that reflects my qualifications and contributions.

    • I am flexible and willing to consider a range of compensation options.

    • I am seeking a fair and r...

  • Answered by AI
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
-

I appeared for an interview in Oct 2024.

Round 1 - Technical 

(2 Questions)

  • Q1. Tell me about DFIG
  • Ans. 

    DFIG stands for Doubly Fed Induction Generator, a type of generator used in wind turbines.

    • DFIG is a type of generator commonly used in wind turbines

    • It has two sets of windings - one connected to the grid and the other connected to a converter

    • The converter allows control of the generator's output power and speed

    • DFIG is known for its ability to provide variable speed operation and improved efficiency

    • It is a popular choic...

  • Answered by AI
  • Q2. How wind power is generated
  • Ans. 

    Wind power is generated by harnessing the kinetic energy of wind to turn turbines, which then convert the energy into electricity.

    • Wind turbines capture the kinetic energy of the wind and convert it into mechanical energy.

    • The mechanical energy is then used to turn a generator, which produces electricity.

    • Wind power is a renewable energy source that is clean and sustainable.

    • Wind farms are large areas with multiple wind tu...

  • Answered by AI

Service Engineer Interview Questions Asked at Other Companies

asked in Tata AIG
Q1. What are the compulsory policy excess in four wheeler private veh ... read more
asked in Voltas
Q2. How much sallery you want? And you know about the term and condit ... read more
asked in Atlas Copco
Q3. What is the basic hydraulic system? What are the function of vari ... read more
asked in FANUC
Q4. •        Coordinate with other ... read more
Q5. If we want to increase engine torque, how?
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jun 2024. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. My experience with wind turnbine
  • Ans. 

    I have extensive experience working with wind turbines, including maintenance, troubleshooting, and repairs.

    • Performed regular maintenance checks on wind turbines to ensure optimal performance

    • Troubleshooted and repaired mechanical and electrical issues as needed

    • Worked with a team to install new wind turbines and ensure they were functioning correctly

    • Utilized specialized tools and equipment to perform tasks safely and ef

  • Answered by AI
  • Q2. Roles and responsibilities at site incharge level
  • Ans. 

    Site incharge oversees operations, manages resources, ensures safety, and coordinates with stakeholders.

    • Managing day-to-day operations at the site

    • Supervising and coordinating with on-site staff and contractors

    • Ensuring compliance with safety regulations and protocols

    • Managing resources effectively to meet project deadlines

    • Communicating with clients, vendors, and other stakeholders

    • Troubleshooting technical issues and prov...

  • Answered by AI

Service Engineer Interview Questions & Answers

user image Laxmi Narayan

posted on 6 Apr 2024

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Focus on communication skill.

Round 2 - Technical 

(1 Question)

  • Q1. Focus on roll and work wise technical skill.

Interview Preparation Tips

Interview preparation tips for other job seekers - Pls develop your communication skill.

Vestas interview questions for designations

 Service Technician

 (3)

 Engineer Trainee

 (3)

 Electrical Engineer

 (3)

 NDT Engineer

 (2)

 Junior Engineer

 (2)

 Mechanical Engineer

 (1)

 Calibration Engineer

 (1)

 Supplier Quality Engineer

 (1)

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Electrical basic and advance knowledge
  • Q2. HT LT line, transformer,generator
  • Q3. Igbt,thyrister,rectifier,inverter,diode

Interview Preparation Tips

Interview preparation tips for other job seekers - theory knowledge & experience of field

Interview questions from similar companies

I applied via Walk-in and was interviewed before Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Why join jakson and why left old company.
  • Q2. What you have Cummins training id
  • Q3. How to increaseed business
  • Ans. 

    Increasing business can be achieved through various strategies.

    • Identify target audience and tailor marketing efforts accordingly

    • Offer promotions and discounts to attract new customers

    • Improve customer service to retain existing customers

    • Expand product or service offerings to attract a wider audience

    • Collaborate with other businesses to reach new markets

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - If you have Cummins HHP I'd. Your joining 80%. And you prepared dg related questions
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected
Round 1 - Technical 

(2 Questions)

  • Q1. What is Plant load factor
  • Ans. 

    Plant load factor is a measure of the actual output of a power plant compared to its maximum possible output.

    • Plant load factor is calculated by dividing the actual energy generated by the plant over a specific period by the maximum possible energy that could have been generated during the same period.

    • It is expressed as a percentage and indicates how efficiently a power plant is being utilized.

    • A high plant load factor i...

  • Answered by AI
  • Q2. What is machine availablity and how to calculate it
  • Ans. 

    Machine availability is the percentage of time a machine is able to be used for its intended purpose.

    • Machine availability is calculated by dividing the total operating time by the total time in a given period, then multiplying by 100.

    • For example, if a machine operates for 800 hours in a month and there are 1000 total possible operating hours, the availability would be 80%.

    • Factors like downtime, maintenance, and repairs

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Line diagram of WTG
  • Ans. 

    A line diagram of a wind turbine generator (WTG) shows the flow of energy from wind to electricity.

    • The diagram typically includes the rotor blades, gearbox, generator, and power electronics

    • The blades capture wind energy and turn the rotor, which drives the gearbox

    • The gearbox increases the rotational speed and sends it to the generator

    • The generator converts the rotational energy into electrical energy

    • The power electroni...

  • Answered by AI
  • Q2. Working of DFIG converters
  • Ans. 

    DFIG converters are used in wind turbines to convert variable frequency AC power to DC power and back to AC power.

    • DFIG stands for Doubly Fed Induction Generator

    • The converter consists of two back-to-back voltage source converters

    • One converter controls the rotor current and the other controls the grid current

    • The rotor current is controlled to maintain a constant torque on the turbine

    • The grid current is controlled to main...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is igbt and working
  • Ans. 

    IGBT stands for Insulated Gate Bipolar Transistor, a semiconductor device used for switching applications in power electronics.

    • IGBT is a type of transistor that combines the high efficiency of a bipolar junction transistor (BJT) with the high input impedance of a MOSFET.

    • It is commonly used in applications such as motor drives, inverters, and power supplies.

    • IGBTs are used for high power applications due to their ability...

  • Answered by AI
  • Q2. What is ups and working

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company

I applied via Campus Placement and was interviewed in Dec 2016. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. How is your project related to our company?
  • Ans. 

    My project involves developing a new software tool that aligns with your company's focus on innovative technology solutions.

    • My project utilizes similar technology and methodologies that your company specializes in.

    • The end goal of my project aligns with the mission and values of your company.

    • I have experience working with similar clients or industries that your company serves.

    • My project could potentially enhance or comp...

  • Answered by AI
  • Q2. What do you want to achieve
  • Ans. 

    I want to achieve continuous growth and development in my engineering career.

    • Continuous learning and upskilling in new technologies and tools

    • Contributing to innovative projects and solutions

    • Building a strong professional network

    • Advancing to higher positions within the engineering field

  • Answered by AI
  • Q3. Any suggestions from your friend side about your weakness
  • Ans. 

    My friend suggested that my weakness is being too detail-oriented.

    • Sometimes I get caught up in minor details and lose sight of the bigger picture

    • I may spend too much time perfecting a task instead of completing it efficiently

    • I tend to overanalyze situations which can lead to indecision

  • Answered by AI
  • Q4. Why dont you want to pursue higher studies
  • Ans. 

    I believe practical experience is more valuable than theoretical knowledge gained through higher studies.

    • I prefer hands-on learning and gaining real-world experience in the field.

    • I believe in continuous learning through on-the-job training and professional development.

    • I have already acquired the necessary skills and knowledge through my current work experience.

    • I want to focus on building my career and gaining practical...

  • Answered by AI

Interview Preparation Tips

Round: Technical Interview
Experience: they wanted to judge your technical skills

Round: HR Interview
Experience: They were interested in knowing about your attitude

College Name: IIT Madras

Vestas Interview FAQs

How many rounds are there in Vestas Service Engineer interview?
Vestas interview process usually has 1-2 rounds. The most common rounds in the Vestas interview process are Technical, Aptitude Test and HR.
How to prepare for Vestas Service Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Vestas. The most common topics and skills that interviewers at Vestas expect are Recruitment, Social Media Marketing, Steam Turbine, Wind Energy and Customer Service Operations.
What are the top questions asked in Vestas Service Engineer interview?

Some of the top questions asked at the Vestas Service Engineer interview -

  1. How to failure coupling in Ganesa ...read more
  2. Quality issue there 0 max coupli...read more
  3. How wind power is genera...read more

Tell us how to improve this page.

Vestas Service Engineer Interview Process

based on 6 interviews

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Adani Power Interview Questions
3.9
 • 223 Interviews
Adani Group Interview Questions
3.9
 • 188 Interviews
Tata Power Interview Questions
3.9
 • 163 Interviews
NTPC Interview Questions
4.2
 • 158 Interviews
Eaton Interview Questions
3.9
 • 122 Interviews
ReNew Interview Questions
4.2
 • 88 Interviews
Hitachi Energy Interview Questions
4.1
 • 82 Interviews
Jakson Group Interview Questions
4.2
 • 78 Interviews
Siemens Energy Interview Questions
4.1
 • 74 Interviews
View all
Vestas Service Engineer Salary
based on 92 salaries
₹3.5 L/yr - ₹10 L/yr
52% more than the average Service Engineer Salary in India
View more details

Vestas Service Engineer Reviews and Ratings

based on 41 reviews

4.2/5

Rating in categories

4.6

Skill development

3.9

Work-life balance

4.5

Salary

4.1

Job security

4.6

Company culture

3.6

Promotions

3.9

Work satisfaction

Explore 41 Reviews and Ratings
Engineer
268 salaries
unlock blur

₹3 L/yr - ₹12 L/yr

Senior Engineer
189 salaries
unlock blur

₹5 L/yr - ₹14.1 L/yr

Lead Engineer
184 salaries
unlock blur

₹8.2 L/yr - ₹28.6 L/yr

Assistant Lead Engineer
177 salaries
unlock blur

₹8.9 L/yr - ₹20 L/yr

Buyer
108 salaries
unlock blur

₹3.2 L/yr - ₹9 L/yr

Explore more salaries
Compare Vestas with

Adani Power

3.9
Compare

Adani Group

3.9
Compare

NTPC

4.2
Compare

Tata Power

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview