Vensa Infrastructure QS Engineer Interview Questions and Answers

Q1. What is cement and sand
Ans. 
Cement is a binding material used in construction to hold together bricks, stones, and other materials. Sand is a fine aggregate used in concrete mixes.
• Cement is a powdery substance made from limestone and clay, which when mixed with water forms a paste that hardens to bind materials together.

• Sand is a granular material composed of finely divided rock and mineral particles, commonly used as a fine aggregate in concrete...read more
Answered by AI
Add your answer
Q2. What is aggregate and sand
Ans. 
Aggregate and sand are materials commonly used in construction for creating concrete and mortar.
• Aggregate is a mixture of sand, gravel, crushed stone, or other materials used in construction.

• Sand is a granular material composed of finely divided rock and mineral particles.

• Aggregate is used in concrete to provide bulk and strength, while sand is used in mortar for bonding materials together.

• Examples of aggregate include...read more
Answered by AI
Add your answer

Q1. Qty of cement in M25 grade concrete
Ans. 
The quantity of cement in M25 grade concrete is 350 kg/m³.
• M25 grade concrete has a mix proportion of 1:1:2 (cement:sand:aggregate).

• The total volume of concrete is taken as 1 m³.

• Therefore, the quantity of cement required for 1 m³ of M25 grade concrete is 350 kg.

• This is calculated by multiplying the volume of concrete by the proportion of cement in the mix.
Answered by AI
Add your answer
Q2. Exact weight of different dia of steel
Ans. 
The weight of steel varies with its diameter.
• The weight of steel can be calculated using the formula: weight = volume x density

• The density of steel is approximately 7850 kg/m³

• The volume of steel can be calculated using the formula: volume = pi x (diameter/2)² x length

• For example, a 10mm diameter steel rod with a length of 1 meter would weigh approximately 0.393 kg
Answered by AI
Add your answer
Q3. Process of waterproofing
Ans. 
Waterproofing is the process of making a structure or object resistant to water penetration.
• Identify the areas that need waterproofing such as roofs, walls, and foundations.

• Clean and prepare the surface to be waterproofed.

• Apply a waterproofing membrane or coating such as bituminous, acrylic, or polyurethane.

• Ensure proper drainage and slope to prevent water accumulation.

• Test the waterproofing system for leaks and make n...read more
Answered by AI
Add your answer
Q4. Conversion of brass to Cum
Ans. 
Conversion of brass to Cum
• Brass is an alloy of copper and zinc, while Cum is not a known substance

• It is not possible to convert brass to Cum

• Perhaps the question is referring to a different substance or material
Answered by AI
Add your answer

STEEL WEIGHT, BBS,COVER BLOCK

Q1. LAYOUT, DRAWING READING
Add your answer

Q1. What is the weight of one bag cement
Ans. 
The weight of one bag of cement varies depending on the country and type of cement.
• The weight of one bag of cement is typically between 25kg and 50kg.

• In the United States, a bag of Portland cement usually weighs 94 pounds (42.6kg).

• In Europe, a bag of cement typically weighs 50kg.

• Different types of cement, such as lightweight cement, may have different weights per bag.
Answered by AI
View 11 more answers
Q2. What is initial setting time of cement
Ans. 
Initial setting time of cement is the time taken for the cement paste to harden sufficiently to resist certain specified pressure.
• Initial setting time is an important property of cement as it determines the time available for mixing, placing, and finishing of concrete.

• It is measured by the Vicat apparatus, which consists of a needle and a mould filled with cement paste.

• The initial setting time is typically around 30 mi...read more
Answered by AI
View 5 more answers
Q3. What is the size of concrete cube
Ans. 
The size of a concrete cube refers to its dimensions, typically measured in millimeters.
• The size of a concrete cube is usually specified by the engineer or client.

• Common sizes for concrete cubes are 150mm, 200mm, and 300mm.

• The size of the cube is important for testing the compressive strength of the concrete.

• The cubes are typically cast and cured for a specific period before testing.
Answered by AI
View 7 more answers
Q4. What is the minimum diameter for doweals bar
Ans. 
The minimum diameter for dowel bars depends on the specific application and design requirements.
• The minimum diameter for dowel bars is typically specified in the project's design documents or specifications.

• It is important to consider factors such as the load transfer requirements, concrete strength, and spacing between dowel bars when determining the minimum diameter.

• In general, dowel bars for pavement joints are comm...read more
Answered by AI
View 3 more answers

Q1. What is the lap length of bars for compperision zone
Ans. 
The lap length of bars for compression zone is the minimum length required to ensure proper transfer of stress between two overlapping bars.
• The lap length is determined based on the diameter of the bars, concrete strength, and the bond strength between the bars and concrete.

• It is important to provide adequate lap length to prevent failure due to inadequate bond between the bars and concrete.

• The lap length for compressi...read more
Answered by AI
View 3 more answers
Q2. What is the minimum alowable ph value of water
Ans. 
The minimum allowable pH value of water is 6.5.
• The minimum allowable pH value of water is determined by various regulatory bodies and standards.

• For drinking water, the World Health Organization recommends a minimum pH of 6.5 to prevent corrosion of pipes and plumbing fixtures.

• In some industrial processes, a minimum pH of 6.0 or even lower may be required.

• Water with a pH below the minimum allowable value may be consider...read more
Answered by AI
View 2 more answers

Q1. About civil engineering for site and billing Quantity surveying and rate analysis .actual site quantity measurements and check contractor bill and certification
Add your answer
Q2. Concrete quantity calculations
Add your answer
Q3. As per site and as per drawing calculated
Add your answer

Q1. How is stone/Tile flooring /Cladding is measured
Ans. 
Stone/Tile flooring/Cladding is measured in square meters or square feet depending on the unit of measurement used.
• Measure the length and width of the area to be covered with stone/tile flooring/cladding

• Multiply the length by the width to get the total square meters or square feet

• Account for any cuts or wastage in the calculation

• Consider the pattern or design of the flooring/cladding when measuring
Answered by AI
Add your answer

Q1. Just construction activities
Add your answer

Q1. Just Salary negotiations
Add your answer

Q1. Position and Salary Finalisation
Add your answer