Filter interviews by
Tender Exicutive and billing
Piling work estimate involves calculating the cost and quantity of materials needed for piling work on a construction site.
Calculate the total length and diameter of piles required for the project
Estimate the quantity of concrete, steel, and other materials needed for piling
Consider factors like soil conditions, depth of piling, and equipment costs
Use software tools like AutoCAD and Excel for accurate estimates
Major bridge activities include design, construction, maintenance, and inspection.
Designing the bridge structure and foundation
Constructing the bridge using materials like steel, concrete, and cables
Maintaining the bridge to ensure safety and longevity
Inspecting the bridge regularly for any signs of wear or damage
I applied via Campus Placement and was interviewed in Jan 2023. There was 1 interview round.
Different types of foundations are used in civil engineering for various purposes.
Shallow foundations are used for light structures and transfer loads to the soil near the surface.
Deep foundations are used for heavy structures and transfer loads to deeper layers of soil or rock.
Spread footings are used to distribute the load of a structure over a larger area.
Pile foundations are used to transfer loads through vertical ...
Top trending discussions
posted on 14 Nov 2017
I was interviewed before Nov 2016.
Leveling is the process of determining the height or elevation of a point or surface relative to a reference point.
Leveling is commonly used in civil engineering and construction to ensure accurate measurements and proper alignment.
It involves the use of leveling instruments such as a level, theodolite, or laser level.
The process typically includes setting up benchmarks or reference points, taking readings at different...
The diameter of six mm refers to the size or measurement of a circular object that is six millimeters in width.
The diameter is the distance across the center of a circle, passing through the circumference.
A six mm diameter can be visualized as a circle with a width of six millimeters.
It is a common measurement used in various industries, including engineering and manufacturing.
For example, a six mm diameter steel rod w...
LEP stands for Load Equivalent Factor for Pavement design.
LEP is used in pavement design to determine the load-carrying capacity of the pavement.
The formula for LEP depends on the specific design method being used.
For example, in the AASHTO design method, LEP is calculated using the formula: LEP = (ESAL/1000) * (1 + 0.003 * (T - 3))
Here, ESAL is the Equivalent Single Axle Load and T is the pavement design period in yea...
posted on 6 Sep 2023
I applied via Company Website and was interviewed in Aug 2023. There were 3 interview rounds.
Related to auto level and total station one more thing buliding material
posted on 28 Nov 2023
I applied via Company Website and was interviewed before Nov 2022. There were 2 interview rounds.
The lap length of a bar in a beam is the length of overlap between two reinforcing bars.
Lap length is important for ensuring the transfer of load between bars.
It helps in maintaining the continuity of reinforcement.
The lap length depends on factors like bar diameter, concrete strength, and design requirements.
It is typically specified in building codes or structural design drawings.
For example, in a beam, the lap lengt...
The ratio of M15 grade of concrete is 1:2:4.
The ratio of M15 grade of concrete refers to the proportion of cement, sand, and aggregate used in the mix.
For M15 grade concrete, the ratio is 1 part cement : 2 parts sand : 4 parts aggregate.
This means that for every 1 unit of cement, 2 units of sand, and 4 units of aggregate are used.
The ratio is usually represented as 1:2:4.
posted on 16 Dec 2022
I applied via Walk-in and was interviewed in Nov 2022. There were 2 interview rounds.
WCR stands for Working Capital Ratio.
Working Capital Ratio is a financial metric used to measure a company's liquidity and ability to pay off its short-term debts.
It is calculated by dividing a company's current assets by its current liabilities.
A WCR of 1 or higher indicates that a company has enough current assets to cover its current liabilities.
A WCR below 1 may indicate that a company may have difficulty paying of...
The minimum thickness of grade slab depends on the load it will bear and the soil conditions.
The thickness of the grade slab should be determined by a structural engineer.
It should be thick enough to support the weight of the structure and any additional loads.
The soil conditions should also be taken into consideration when determining the thickness.
For example, if the soil is soft or unstable, a thicker slab may be re...
Planning is the process of creating a roadmap to achieve a specific goal or objective.
It involves identifying the goal or objective
Determining the steps needed to achieve it
Allocating resources and setting timelines
Monitoring progress and making adjustments as necessary
Examples include project planning, financial planning, and strategic planning
posted on 1 Nov 2022
I applied via Approached by Company and was interviewed in Oct 2022. There were 3 interview rounds.
Surgery in field what ever you ask not issue
posted on 18 Jan 2022
I applied via Approached by Company and was interviewed in Jan 2023. There were 2 interview rounds.
M20 is a grade of concrete with a compressive strength of 20 MPa.
M20 is a commonly used grade of concrete in construction.
It has a compressive strength of 20 MPa or 2900 psi.
It is suitable for non-load bearing walls, footings, and other general construction purposes.
The mix ratio for M20 concrete is 1:1.5:3 (cement:sand:aggregate).
based on 3 interviews
Interview experience
based on 7 reviews
Rating in categories
Civil Site Engineer
11
salaries
| ₹0 L/yr - ₹0 L/yr |
Site Engineer
4
salaries
| ₹0 L/yr - ₹0 L/yr |
Supervisor
4
salaries
| ₹0 L/yr - ₹0 L/yr |
Accountant
3
salaries
| ₹0 L/yr - ₹0 L/yr |
Civil Engineer
3
salaries
| ₹0 L/yr - ₹0 L/yr |
L&T Construction
Tata Projects
GMR Group
Hindustan Construction Company