Add office photos
Filter interviews by
Valeo Senior Cost Engineer Interview Questions and Answers
Valeo Senior Cost Engineer Interview Experiences
1 interview found
Anonymous
I applied via Referral and was interviewed in May 2021. There were 4 interview rounds.
Interview Questionnaire
1 Question
- Q1. Explain the Casting and Forging Machining process flow
- Ans.
Casting and forging machining process flow involves several steps to transform raw materials into finished products.
Casting process: molten metal is poured into a mold and allowed to solidify
Forging process: metal is heated and shaped by applying compressive force
Machining process: removing excess material to achieve desired shape and dimensions
Common machining techniques include turning, milling, drilling, and grindin...
Interview Preparation Tips
Interview questions from similar companies
First round is aptitude test all type of questions asked like verbal, reasoning and Technical
(2 Questions)
- Q1. Explain stress, strain curve diagram with example?
- Ans.
Stress-strain curve shows relationship between stress and strain in a material under tension.
Stress-strain curve is a graphical representation of how a material deforms under stress.
It typically consists of a linear elastic region, a yield point, plastic deformation, and ultimate failure.
Example: Steel has a high yield strength, so its stress-strain curve shows a steep initial slope.
Example: Rubber has a low yield stre...
- Q2. What is DOF? How many degrees of freedom from any object
- Ans.
DOF stands for Degrees of Freedom. It refers to the number of independent parameters that define the configuration of an object.
DOF is the number of ways a rigid body can move in 3D space.
For a rigid body in 3D space, there are 6 degrees of freedom - 3 translational and 3 rotational.
Examples of DOF include linear motion along x, y, z axes and rotational motion around x, y, z axes.
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed in May 2024. There were 3 interview rounds.
(1 Question)
- Q1. Technical Interview
(1 Question)
- Q1. Take us through your profile?
(1 Question)
- Q1. Salary negotiation and offer?
(2 Questions)
- Q1. Explain various GD&T
- Ans.
Geometric Dimensioning and Tolerancing (GD&T) is a system for defining and communicating engineering tolerances.
GD&T is used to specify the allowable variations in form, size, and orientation of features on a part.
It uses symbols, such as concentricity, flatness, and perpendicularity, to communicate the desired tolerances.
GD&T helps ensure that parts fit together properly and function as intended.
Examples of GD&T symbo...
- Q2. Explain DFM, DFS, DFA
- Ans.
DFM, DFS, and DFA stand for Design for Manufacturing, Design for Service, and Design for Assembly, respectively.
DFM focuses on designing products that are easy and cost-effective to manufacture.
DFS focuses on designing products that are easy to service and maintain.
DFA focuses on designing products that are easy to assemble.
Consideration of DFM, DFS, and DFA principles can lead to more efficient and cost-effective prod...
Skills evaluated in this interview
Selected
I applied via Naukri.com and was interviewed in Feb 2024. There was 1 interview round.
(5 Questions)
- Q1. Electrical machine,
- Q2. Transmission and generation
- Q3. Basic details in electrical
- Q4. Induction motor
- Q5. Basic details in tyre building machine and curring machine
Interview Preparation Tips
Alluri Harish
Tough one to attempt
(1 Question)
- Q1. Asked questions related to few mechanical engineering topics
(4 Questions)
- Q1. Technical question jo se hi ho jyada hard nhi ho 3phase connection. Single phase connection ke question ho. What is rectifier
- Q2. What is rectifier. Three phase connection
- Ans.
A rectifier is an electrical device that converts alternating current (AC) to direct current (DC). Three-phase connection refers to a system that uses three conductors to carry three alternating currents that are out of phase with each other.
Rectifiers are commonly used in power supplies and electronic devices to convert AC to DC.
Three-phase connections are used in industrial and commercial settings to power large moto...
- Q3. Ac and dc supply of between different
- Ans.
AC and DC supplies differ in their voltage polarity and frequency.
AC voltage changes direction periodically while DC voltage flows in one direction only.
AC voltage has a frequency typically of 50 or 60 Hz while DC voltage has a constant voltage level.
AC voltage is used for power transmission over long distances while DC voltage is used for electronic devices.
AC voltage can be easily stepped up or down using transformer...
- Q4. What is TRANSFRAMER. What is dc GERNETER
- Ans.
TRANSFRAMER is not a known term. DC GENERATOR is a device that converts mechanical energy into electrical energy.
TRANSFRAMER is not a known term in electrical engineering
DC GENERATOR is a device that converts mechanical energy into electrical energy
DC generators are commonly used in power plants and electric vehicles
Interview Preparation Tips
Selected
I applied via Approached by Company and was interviewed before Oct 2022. There were 3 interview rounds.
(1 Question)
- Q1. CAD test will be there and Interview questions related to interior/exterior with respect to Design rules , Homologation
(1 Question)
- Q1. Design rules related, master section related, Homologation related
Interview Preparation Tips
- CATIA
- UG NX
- Homologation
- Surface Modeling
- Part Modeling
- Engineering Drawing
Selected
I applied via Recruitment Consulltant and was interviewed before Dec 2021. There were 2 interview rounds.
(4 Questions)
- Q1. About design engineer questions
- Q2. Previous company questions
- Q3. Basic design questions
- Q4. Autocad test questions
Interview Preparation Tips
- AutoCAD 2D
Selected
I applied via Walk-in and was interviewed in Dec 2023. There was 1 interview round.
(5 Questions)
- Q1. Part drawing 2D or 3D
- Ans.
2D is a flat picture while 3D is one that has depth.
- Q2. Sketcher 2d drawings
- Ans.
First of all we sketch 2d drawings after we assembly the complete object
- Q3. Assembly all part drawing
- Ans.
When 2D sketch complete, after we calling parts to make complete assembly.
- Q4. Generative Sheet metal
- Q5. Generative drafting
Interview Preparation Tips
- CATIA
- AutoCAD
Valeo Interview FAQs
Tell us how to improve this page.
Valeo Interviews By Designations
- Valeo Software Engineer Interview Questions
- Valeo Graduate Engineer Trainee (Get) Interview Questions
- Valeo Design Engineer Interview Questions
- Valeo Hardware Engineer Interview Questions
- Valeo Embedded Developer Interview Questions
- Valeo Intern Interview Questions
- Valeo Manufacturing Engineer Interview Questions
- Valeo Quality Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Structural Engineer Interview Questions
- Piping Engineer Interview Questions
- Design Engineer Interview Questions
- Civil Structural Engineer Interview Questions
- Senior Structural Engineer Interview Questions
- Senior Design Engineer Interview Questions
- Electrical Engineer Interview Questions
- Lead Mechanical Engineer Interview Questions
- Show more
People are getting interviews through
Interview Questions from Similar Companies
Fast track your campus placements
Valeo Senior Cost Engineer Reviews and Ratings
based on 1 review
Rating in categories
|
Software Engineer
413
salaries
|  ₹3.5 L/yr - ₹13.6 L/yr |
|
Senior Software Engineer
279
salaries
| ₹7.2 L/yr - ₹24 L/yr |
|
Design Engineer
214
salaries
| ₹3.9 L/yr - ₹12.1 L/yr |
|
Senior Engineer
206
salaries
| ₹6 L/yr - ₹19.5 L/yr |
|
CAD Engg
177
salaries
| ₹3.7 L/yr - ₹10.5 L/yr |
Bosch
Continental
Samvardhana Motherson Group
Mahindra & Mahindra
Calculate your in-hand salary
- Home >
- Interviews >
- Valeo Interview Questions >
- Valeo Senior Cost Engineer Interview Questions
