Add office photos
Filter interviews by
Unitac Energy Solutions IME Manager Interview Questions and Answers
Unitac Energy Solutions IME Manager Interview Experiences
1 interview found
Anonymous
Selected
I applied via Referral and was interviewed before Dec 2021. There were 5 interview rounds.
(2 Questions)
- Q1. About current working process
- Q2. Asked related to man management
Frequently called me and discussed about current working process
Discussed on conference call along with other state IME manager
Asked some doubts and part numbers related to service and purchase
Interview Preparation Tips
- Related to electrical
Top trending discussions
Interview questions from similar companies
Selected
I applied via Referral and was interviewed in Oct 2024. There were 2 interview rounds.
(2 Questions)
- Q1. Why do you want to join Google?
- Q2. Where do you see yourself in 5 years?
(2 Questions)
- Q1. Explain the differences between monolithic and microarchitectures
- Ans.
Monolithic architecture is a single-tiered software application while microarchitecture is a multi-tiered software application.
Monolithic architecture is a single-tiered software application where all components are interconnected and interdependent.
Microarchitecture is a multi-tiered software application where components are divided into separate layers, each with its own responsibility.
Monolithic architecture is easi...
- Q2. Why is cloud better than on premise?
- Ans.
Cloud offers scalability, cost-effectiveness, flexibility, and accessibility compared to on-premise solutions.
Scalability: Cloud allows for easily scaling resources up or down based on demand, while on-premise solutions require physical upgrades.
Cost-effectiveness: Cloud eliminates the need for expensive hardware and maintenance costs associated with on-premise solutions.
Flexibility: Cloud offers the ability to access ...
Skills evaluated in this interview
Selected
I applied via Referral and was interviewed in Oct 2024. There was 1 interview round.
(2 Questions)
- Q1. Use pscad and make drif tied wind power plan
- Ans.
Using PSCAD to create a grid-tied wind power plant
Create a new project in PSCAD
Design the wind turbine system with appropriate parameters
Connect the wind turbine system to the grid
Simulate the system to analyze its performance
Optimize the design for maximum efficiency
- Q2. How many years you will stay in this company?
I applied via Company Website and was interviewed in Apr 2024. There were 2 interview rounds.
Gear box replacement work
(7 Questions)
- Q1. Barring checking and replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and belt clamping take-up up and blumber block top cover open and slue Ba...
- Ans.
Belt clamping take-up pulley up and blumber block top cover open and slue Barring remove and new slue Barring checking and replace and bolts nut tightening sure and top cover fixed and bolts nut tightening sure and belt clamping and tackup pulley down and paper work cancelled and conveyer belt running ok
- Q2. V-scraper replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and v-scraper remove and new v-scraper replace and bolts nut tigh...
- Q3. Roller changed and replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and fream number mark and Roller shift and Roller cut change and walked awa...
- Q4. Motor replace work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and motor remove and new motor replace and bolts nut tightening sure and ...
- Ans.
Old motor bolts nut open and new motor replace and bolts nut tightening sure and Dayal gauge eliminate process ok and paper work cancelled and conveyer belt running ok
- Q5. Gear box replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and gear box remove and new gear box replace and bolts nut tighten...
- Ans.
Walked away clean and fresh and bolts nut open and old gear box remove and new gear box replace and bolts nut tightening sure and Dayal gauge eliminate process ok paper work cancelled and conveyer belt running ok
- Q6. Conveyer Barring checking and savings greasing work and safety first and all ppes sure and paper work and all pulley checking and savings Greasing sure and paper work cancelled and conveyer belt running o...
- Q7. Fluid coupling oil replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolt nut open and old clean and fresh and new Oli Pur dropped and bolt...
Interview Preparation Tips
Punit Trivedi
(1 Question)
- Q1. About experience and most of the about skills
(1 Question)
- Q1. Tell me about yourself and skills
(2 Questions)
- Q1. Tell me about yourself and some technical questions
- Q2. Why you want to join
(2 Questions)
- Q1. Salary discussion
- Q2. Can you early Joining dates?
I applied via Recruitment Consulltant and was interviewed in May 2024. There was 1 interview round.
(2 Questions)
- Q1. Why project management after all
- Q2. Best stakeholder management practices
- Ans.
Effective stakeholder management is crucial for project success.
Identify key stakeholders early on
Communicate regularly and clearly with stakeholders
Address stakeholder concerns and expectations
Involve stakeholders in decision-making processes
Manage conflicts and build positive relationships with stakeholders
Selected
I applied via Job Portal and was interviewed in May 2024. There was 1 interview round.
(1 Question)
- Q1. How to managed manpower in critical condition.
(3 Questions)
- Q1. BBS safety ,legal requirements
- Q2. Training plant safety
- Q3. Precess safety management
Selected
I applied via Company Website
(1 Question)
- Q1. COLOUR CODE OF BOILER TUBES
- Ans.
Boiler tubes are color coded for easy identification and maintenance purposes.
Boiler tubes are typically color coded based on their function or material composition.
Common color codes include blue for feedwater tubes, red for steam tubes, and green for superheater tubes.
Color coding helps maintenance personnel quickly identify and troubleshoot issues with specific tubes.
Color coding also aids in proper installation and...
(1 Question)
- Q1. EXPECTATIONS FROM NTPC
- Ans.
NTPC expects employees to demonstrate strong leadership, technical skills, commitment to safety, and dedication to achieving company goals.
Demonstrate strong leadership skills in managing teams and projects
Possess technical expertise relevant to the role
Prioritize safety in all operations and decision-making
Show dedication to achieving NTPC's goals and objectives
Selected
I applied via Naukri.com and was interviewed in Jan 2024. There were 2 interview rounds.
(1 Question)
- Q1. Discussion on background and profile
Psychometric test happened online
Unitac Energy Solutions Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Implementation Manager Interview Questions
- Assistant Manager Interview Questions
- IT Manager Interview Questions
- Import Manager Interview Questions
- Deputy Manager Interview Questions
- Export & Import Manager Interview Questions
- Project Manager Interview Questions
- Implementation Engineer Interview Questions
- Show more
People are getting interviews through
Interview Questions from Similar Companies
|
Project Engineer
5
salaries
|  ₹2 L/yr - ₹3.2 L/yr |
|
Operations Manager
5
salaries
| ₹3.5 L/yr - ₹10 L/yr |
|
MIS Executive
5
salaries
| ₹1.5 L/yr - ₹8 L/yr |
|
Technical Manager
5
salaries
| ₹4 L/yr - ₹5 L/yr |
|
Surveillance Manager
5
salaries
| ₹3 L/yr - ₹3.5 L/yr |
Tata Power
Adani Green Energy
Suzlon Group
Thermax Limited
Calculate your in-hand salary
- Home >
- Interviews >
- Unitac Energy Solutions Interview Questions >
- Unitac Energy Solutions IME Manager Interview Questions
