Filter interviews by
I applied via Naukri.com and was interviewed in Dec 2023. There was 1 interview round.
Previous site infrastructure included data centers, networking equipment, servers, and storage systems.
Data centers were located in multiple regions for redundancy.
Networking equipment included routers, switches, and firewalls.
Servers were a mix of physical and virtual machines.
Storage systems used SAN and NAS technologies.
Backup and disaster recovery plans were in place.
Monitoring tools were used to track performance
Multiple scenarios of UPS DG CHILLER FAILURES
Star-delta power wiring is a method used to reduce starting current in motors, while control wiring is used to control the operation of electrical systems.
Star-delta power wiring involves connecting a motor in a star configuration during starting to reduce current spikes, then switching to a delta configuration for normal operation.
Control wiring includes components like switches, relays, and contactors to control the ...
An HVAC system is a system that provides heating, ventilation, and air conditioning to a building or space.
HVAC stands for Heating, Ventilation, and Air Conditioning
It helps regulate temperature, humidity, and air quality in a building
Examples of HVAC systems include furnaces, air conditioners, and ventilation systems
I applied via Naukri.com and was interviewed in Dec 2024. There was 1 interview round.
A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.
Transformers are used to increase or decrease voltage levels in electrical circuits.
They consist of two coils of wire, known as the primary and secondary coils.
The primary coil is connected to a power source, while the secondary coil is connected to the load.
The changing magnetic field i...
ACB stands for Air Circuit Breaker, which is a type of circuit breaker that operates in the air as an arc extinguishing medium.
ACB is used to protect electrical circuits from overloads and short circuits by automatically disconnecting the power supply when a fault is detected.
It consists of a set of contacts that open and close to interrupt the flow of current in the circuit.
ACBs are commonly used in industrial and com...
DG Safety device is a safety device used to protect diesel generators from damage or malfunction.
DG Safety device monitors parameters like temperature, oil pressure, and voltage to ensure safe operation.
It can automatically shut down the generator in case of any abnormal readings to prevent damage.
Examples of DG Safety devices include automatic voltage regulators, engine control modules, and temperature sensors.
Transformer safety refers to measures taken to prevent accidents and ensure the proper functioning of transformers.
Regular maintenance checks to identify any potential issues
Proper grounding to prevent electrical shocks
Using protective equipment when working with transformers
Following safety guidelines and protocols
Installing safety devices such as pressure relief valves
Training employees on safe handling and operation
I applied via Referral and was interviewed in Aug 2021. There was 1 interview round.
Megar is a software tool used for analyzing and optimizing the performance of electrical power systems.
Megar is used for conducting power system studies and analysis.
It helps in identifying potential issues and optimizing the performance of electrical power systems.
Megar can be used for load flow analysis, short circuit analysis, and transient stability analysis.
It assists in determining the optimal placement of power ...
Motor problems can be solved by identifying the root cause and taking appropriate measures.
Identify the root cause of the problem
Check for any loose connections or damaged parts
Replace or repair the faulty parts
Perform regular maintenance to prevent future problems
I have worked on various engineering projects including designing, testing and implementing new systems.
Designed and tested new software systems for a tech company
Implemented new manufacturing processes for a production plant
Collaborated with a team to develop a new product for a client
Conducted research and analysis to improve existing systems
A 3-phase motor is an electrical device that converts electrical energy into mechanical energy using three alternating currents.
A 3-phase motor is more efficient and has higher power output compared to a single-phase motor.
It is commonly used in industrial applications for driving heavy machinery and equipment.
The motor consists of a stator and a rotor, with the stator providing a rotating magnetic field and the rotor ...
To maintain motors and electric equipment, regular cleaning, lubrication, and inspection are essential.
Regularly clean motors and equipment to remove dust and debris.
Inspect for any signs of wear, damage, or loose connections.
Lubricate moving parts as per manufacturer's recommendations.
Ensure proper ventilation and cooling for motors.
Keep electrical equipment away from moisture and extreme temperatures.
Follow maintenan...
I applied via Naukri.com and was interviewed in Aug 2024. There were 2 interview rounds.
The reading on the DG changeover panel indicates the status of the diesel generator system.
The reading on the panel will show which power source (main or backup) is currently supplying electricity.
It may also display information about the load on the generator and any alarms or warnings.
Regularly monitoring the panel reading is important to ensure smooth operation of the generator system.
I applied via Referral and was interviewed in Feb 2021. There was 1 interview round.
M-25 Grade concrete is a type of concrete with a compressive strength of 25 megapascals (MPa).
M-25 Grade concrete is commonly used in construction projects.
The ratio of M-25 Grade concrete is 1:1:2, which means 1 part cement, 1 part fine aggregate (sand), and 2 parts coarse aggregate (stone).
The mix proportion of M-25 Grade concrete is designed to achieve a desired strength and durability for the specific application.
F...
The number of bricks required in 1 cubic meter depends on the size of the bricks and the thickness of the mortar joints.
The size of the bricks and the thickness of the mortar joints determine the number of bricks needed.
Standard brick sizes are commonly used in construction.
For example, if the size of the brick is 200mm x 100mm x 75mm and the thickness of the mortar joint is 10mm, the calculation would be as follows:
- ...
I applied via Referral and was interviewed before Aug 2021. There was 1 interview round.
I applied via Walk-in and was interviewed before May 2020. There were 5 interview rounds.
Documents in quality management system
Quality manual
Standard operating procedures (SOPs)
Work instructions
Forms and templates
Audit reports
Non-conformance reports
Corrective and preventive action (CAPA) reports
Training records
Risk management documents
Change control documents
Process audit is a systematic examination of a process to ensure it is meeting its objectives and requirements.
Process audit involves reviewing the process flow, documentation, and records to identify areas of improvement.
It helps to ensure that the process is being followed correctly and consistently.
Process audit can be conducted internally or externally by a third-party auditor.
It is important to establish clear aud...
based on 2 interviews
Interview experience
based on 1 review
Rating in categories
Assistant Manager
39
salaries
| ₹3.5 L/yr - ₹8 L/yr |
Facility Executive
35
salaries
| ₹2.2 L/yr - ₹4.5 L/yr |
Facility Manager
30
salaries
| ₹3.6 L/yr - ₹8.8 L/yr |
Operations Executive
28
salaries
| ₹2.2 L/yr - ₹4 L/yr |
Key Account Manager
22
salaries
| ₹4.8 L/yr - ₹12.7 L/yr |
Sodexo
ISS Facility Services
Compass Group Support Services
OCS Group