Upload Button Icon Add office photos

Filter interviews by

Technip Energies Assistant Manager HSE Interview Questions and Answers

Updated 4 Nov 2024

Technip Energies Assistant Manager HSE Interview Experiences

2 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Nov 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. What we should ensuring before proceeding lifting.
  • Ans. 

    Ensure proper equipment, weight limits, clear path, and communication before lifting.

    • Check weight limits of equipment being used

    • Ensure proper lifting techniques are being followed

    • Clear the path of any obstacles

    • Communicate with others involved in the lifting process

  • Answered by AI
  • Q2. Working at heights requirement.
  • Q3. Plan, PTW, lifting gears, Competency etc

Interview Preparation Tips

Interview preparation tips for other job seekers - Make sure prepare with HSE policy with plan.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in May 2023.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

All rull and regulations discussion and site impaliment, control.

Round 3 - One-on-one 

(2 Questions)

  • Q1. All technical discussion
  • Q2. HSE rull and regulations implementation, control at site.

Interview Preparation Tips

Interview preparation tips for other job seekers - All parson advice doing onestly tell.

Assistant Manager HSE Interview Questions Asked at Other Companies

Q1. What is your audit skill. What are the emergency response procedu ... read more
asked in CBRE
Q2. What is HIRA and Can you prepare HIRA?
Q3. Safety Precautions during Lifting & Excavation.
Q4. DOCUMENTATION MAINTAINED FOR LAST COMPANY
Q5. What we should ensuring before proceeding lifting.

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Job Portal and was interviewed in Aug 2024. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. About your professional background
  • Q2. IS codes & project legal requirements
  • Ans. 

    Knowledge of relevant IS codes and project legal requirements is essential for ensuring compliance and safety.

    • Familiarity with IS codes related to construction, electrical, fire safety, etc.

    • Understanding of local and national legal requirements for HSE in projects

    • Ability to interpret and apply relevant codes and regulations in project planning and execution

    • Regular updates on changes in codes and regulations to ensure c...

  • Answered by AI
  • Q3. Plant & Machinery Checklist details
  • Q4. Risk assesment & SOP of various activities excavation, lifting, confined space etc.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and give answers.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Oct 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Motor type, Pump lowering, ESR piping etc.
  • Q2. Solar Specification
Round 2 - HR 

(2 Questions)

  • Q1. Notice period is negotiable
  • Q2. 30%hike on current ctc

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep calm, to be honest if you know about whats they ask explain them if not then leave and say sorry.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via campus placement at PSG College of Technology, Coimbatore and was interviewed in Sep 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

General knowlegde, Basic Aptitude, Domain Technical MCQ

Round 2 - Group Discussion 

Genx vs Genz, Altitude and comparsion

Round 3 - One-on-one 

(2 Questions)

  • Q1. Components of Transformer
  • Ans. 

    Components of a transformer include core, windings, and insulation.

    • Core: Provides a path for magnetic flux

    • Windings: Primary and secondary coils for inducing voltage

    • Insulation: Prevents short circuits and ensures safety

  • Answered by AI
  • Q2. Question based on series and parallel resistance
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
No response

I applied via Referral and was interviewed in Dec 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Explain hydration
  • Ans. 

    Hydration is the process of providing adequate fluids to the body to maintain proper function.

    • Hydration is essential for overall health and well-being

    • It helps regulate body temperature, transport nutrients, and remove waste

    • Drinking water, consuming fruits and vegetables, and electrolyte-rich beverages are ways to stay hydrated

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Dec 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. About youself? Role and responsibilities? why are you interested?
  • Ans. 

    I am an experienced Electrical Engineer with a passion for designing and implementing innovative solutions.

    • I have a strong background in electrical engineering, with a focus on power systems and control systems.

    • I have successfully designed and implemented electrical systems for various projects, including commercial buildings and industrial plants.

    • I am skilled in using CAD software for electrical design and have experi...

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. About yourself? Role and responsibilities? day to day site work? what do u know about bechtel? Electrical safety? Drawing details?shop drawing? LOTO system? NC for quality and safety? Earthing system? powe...
Round 4 - HR 

(1 Question)

  • Q1. Documents? Current base salary? Expected base salary? Tentative date of joining?
  • Ans. 

    I can provide the required documents and discuss salary and joining details.

    • I can provide all necessary documents such as resume, certifications, and transcripts.

    • My current base salary is $X per year.

    • I expect a base salary in the range of $Y to $Z per year.

    • I am available to join within X weeks/months.

    • I can discuss further details during the interview.

  • Answered by AI

I applied via Recruitment Consulltant and was interviewed in Sep 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is process for a project (from scratch to commission)
  • Ans. 

    The process for a project involves planning, design, implementation, testing, and commissioning.

    • Define project scope and objectives

    • Create a project plan with timelines and milestones

    • Design the system or product

    • Procure necessary materials and equipment

    • Implement the design and build the system or product

    • Test the system or product to ensure it meets requirements

    • Commission the system or product for use

    • Provide ongoing suppo...

  • Answered by AI
  • Q2. Electrical calculations
Round 3 - One-on-one 

(1 Question)

  • Q1. Case studies and different scenarios
Round 4 - HR 

(1 Question)

  • Q1. All about your experience and expectations

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare for what u had been learning through the years
Prepare resumes contents
Basic knowledge for electronics and electrical
Round 1 - One-on-one 

(5 Questions)

  • Q1. What is the difference between qa and qc
  • Ans. 

    QA focuses on preventing defects while QC focuses on identifying and fixing defects.

    • QA is a process-oriented approach that ensures quality is built into the product from the beginning

    • QC is a product-oriented approach that involves testing and inspecting the product to identify defects

    • QA is proactive while QC is reactive

    • QA involves continuous improvement while QC involves finding and fixing defects

    • Examples of QA activit...

  • Answered by AI
  • Q2. Why you choose QC department
  • Ans. 

    I chose the QC department because of my passion for ensuring quality and my attention to detail.

    • I have always been meticulous and detail-oriented, which are essential qualities for a QC engineer.

    • I enjoy the process of identifying and resolving quality issues to improve overall product performance.

    • I find satisfaction in ensuring that products meet or exceed customer expectations.

    • I believe that quality control plays a cr...

  • Answered by AI
  • Q3. How you tackle NCR situation
  • Ans. 

    I investigate the root cause, propose corrective actions, and ensure implementation to prevent recurrence.

    • Identify the root cause of the NCR

    • Propose corrective actions to prevent recurrence

    • Ensure implementation of corrective actions

    • Document the NCR and corrective actions taken

    • Communicate with relevant stakeholders

  • Answered by AI
  • Q4. What is the procedure of soil and concrete strength testing
  • Ans. 

    Soil and concrete strength testing involves several steps including sample collection, preparation, and testing.

    • Collect soil and concrete samples from the site

    • Prepare the samples for testing by drying and crushing them

    • Perform compression tests on concrete samples to determine strength

    • Perform triaxial or unconfined compression tests on soil samples to determine strength

    • Record and analyze the test results to ensure compl

  • Answered by AI
  • Q5. How you convince your client representative on a critical situation
  • Ans. 

    To convince a client representative on a critical situation, it is important to communicate effectively, provide evidence and solutions, and build trust.

    • Listen actively to the client representative's concerns and understand their perspective.

    • Clearly explain the critical situation, its impact, and potential risks.

    • Present evidence such as test results, data analysis, or documentation to support your claims.

    • Offer alternat...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - To become a successfull QC Engineer. Practical, theoretical, logical, technical and design knowledege is required. When I started qc inspector job my target was qc engineers job. Then next qc supervisor and finally QC MANAGER.

Interview Questionnaire 

2 Questions

  • Q1. What is the Classfication of Hazardous Areas ?
  • Ans. 

    Hazardous areas are classified based on the presence of flammable gases, vapors, liquids, or combustible dusts.

    • Hazardous areas are classified into different zones based on the likelihood and duration of the presence of hazardous substances.

    • The classification is important for designing and installing electrical equipment that can operate safely in these areas.

    • The classification systems vary depending on the country or r...

  • Answered by AI
  • Q2. What is the cable use in oil and gas ?
  • Ans. 

    Cables used in oil and gas are designed to withstand harsh environments and extreme temperatures.

    • Oil and gas cables are typically made of materials such as polyethylene, polyurethane, or neoprene.

    • They are often armored with steel or aluminum to protect against physical damage.

    • Cables used in offshore drilling operations must be able to withstand saltwater corrosion.

    • Fiber optic cables are also used in oil and gas for com...

  • Answered by AI

Technip Energies Interview FAQs

How many rounds are there in Technip Energies Assistant Manager HSE interview?
Technip Energies interview process usually has 2 rounds. The most common rounds in the Technip Energies interview process are Resume Shortlist, Group Discussion and One-on-one Round.
What are the top questions asked in Technip Energies Assistant Manager HSE interview?

Some of the top questions asked at the Technip Energies Assistant Manager HSE interview -

  1. What we should ensuring before proceeding lifti...read more
  2. HSE rull and regulations implementation, control at si...read more
  3. Plan, PTW, lifting gears, Competency ...read more

Tell us how to improve this page.

Technip Energies Assistant Manager HSE Interview Process

based on 3 interviews

Interview experience

4.7
  
Excellent
View more

Interview Questions from Similar Companies

L&T Construction Interview Questions
4.0
 • 741 Interviews
Saint-Gobain Interview Questions
4.0
 • 172 Interviews
AECOM Interview Questions
4.2
 • 114 Interviews
Worley Interview Questions
4.1
 • 109 Interviews
AtkinsRealis Interview Questions
4.0
 • 85 Interviews
Bechtel Interview Questions
4.0
 • 68 Interviews
Wood Group Interview Questions
3.7
 • 58 Interviews
View all
Technip Energies Assistant Manager HSE Salary
based on 24 salaries
₹9 L/yr - ₹18 L/yr
16% more than the average Assistant Manager HSE Salary in India
View more details

Technip Energies Assistant Manager HSE Reviews and Ratings

based on 8 reviews

3.9/5

Rating in categories

3.8

Skill development

3.8

Work-life balance

4.0

Salary

3.5

Job security

4.2

Company culture

3.6

Promotions

3.9

Work satisfaction

Explore 8 Reviews and Ratings
Process Engineer
125 salaries
unlock blur

₹4.8 L/yr - ₹14 L/yr

Piping Designer
119 salaries
unlock blur

₹3.7 L/yr - ₹14.6 L/yr

Senior Engineer
117 salaries
unlock blur

₹8 L/yr - ₹22 L/yr

Senior Principal Engineer
108 salaries
unlock blur

₹15 L/yr - ₹35 L/yr

Deputy Manager
92 salaries
unlock blur

₹7 L/yr - ₹23 L/yr

Explore more salaries
Compare Technip Energies with

L&T Energy Hydrocarbon

3.8
Compare

Baker Hughes

4.0
Compare

McDermott International

4.3
Compare

Saipem

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview