Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Technip Energies Electrical Engineer Interview Questions and Answers

Updated 5 Jan 2025

Technip Energies Electrical Engineer Interview Experiences

3 interviews found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

It's ok the question are asked from the basis

Round 2 - Technical 

(2 Questions)

  • Q1. What is the need of earth wiring
  • Ans. 

    Earth wiring is needed to provide a path for fault currents to safely dissipate into the ground.

    • Ensures safety by preventing electric shocks and fires

    • Protects electrical equipment from damage

    • Meets regulatory requirements for grounding systems

    • Provides a reference point for voltage levels

    • Examples: grounding rods, grounding conductors

  • Answered by AI
  • Q2. To eliminate and drop the sudden fault current in the system
Round 3 - HR 

(1 Question)

  • Q1. He just asked about the basis questions
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Jul 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Regarding your previous work experience
  • Q2. What are the internal testing of transformers
  • Ans. 

    Internal testing of transformers involves various tests to ensure proper functioning and safety.

    • Insulation resistance test to check for any insulation breakdown

    • Polarity test to verify correct connections

    • Turns ratio test to ensure proper voltage transformation

    • Winding resistance test to check for any short circuits or open circuits

    • Impedance test to determine the impedance of the transformer

    • Dielectric tests to assess the

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Try to concentrate on your work

Skills evaluated in this interview

Electrical Engineer Interview Questions Asked at Other Companies

Q1. What is the difference between Switch gear & Circuit Breakers ... read more
Q2. What is ATS, transformer maintenance procedure, protection of tra ... read more
asked in Tata Steel
Q3. 1.what is composite error and ratio error in current transformer?
Q4. 1. Power factor of transformer 2. types of DC machine 3. Working ... read more
Q5. How many types of transformer according to voltage transfer
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Jul 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is the process of battery sizing calculation
  • Ans. 

    Battery sizing calculation involves determining the capacity and voltage required for a specific application.

    • Determine the power requirements of the application

    • Calculate the energy required by multiplying power and time

    • Select a battery with sufficient capacity and voltage to meet energy requirements

    • Consider factors such as temperature, discharge rate, and cycle life

    • Perform testing and validation to ensure the selected

  • Answered by AI
  • Q2. Busbar tripping chemes

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepare what you wrote on your CV. They are asking questions based on your CV only.

What people are saying about Technip Energies

View All
clearchutney
Verified Icon
1w
works at
Technip Energies
Hi, I have been trying many companies for the last 6 months but no response was received yet, please suggest and guide me.
Got a question about Technip Energies?
Ask anonymously on communities.

Interview questions from similar companies

I applied via Naukri.com and was interviewed before Nov 2019. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. Basics related to piperack design
  • Q2. Design parameters for steel structure
  • Ans. 

    Design parameters for steel structure

    • Load capacity and distribution

    • Material strength and durability

    • Environmental factors such as wind and seismic activity

    • Connection details and joint design

    • Fire resistance and protection measures

  • Answered by AI
  • Q3. Number of years exposure to staad
  • Ans. 

    I have 5 years of exposure to STAAD software.

    • I have used STAAD for various structural analysis and design projects.

    • I am proficient in using STAAD for modeling, analysis, and design of steel and concrete structures.

    • I have experience in using STAAD for seismic analysis and design of structures.

    • I have also used STAAD for foundation design and analysis.

    • I keep myself updated with the latest versions and features of STAAD so

  • Answered by AI
  • Q4. Grating design and deflection limits

Interview Preparation Tips

Interview preparation tips for other job seekers - Be positive & confident
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Sep 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Which column takes more load short or Long Column
  • Q2. What kind of pressures will impose on the water tank walls during seismic

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared with fundamentals
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Sep 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

General knowlegde, Basic Aptitude, Domain Technical MCQ

Round 2 - Group Discussion 

Genx vs Genz, Altitude and comparsion

Round 3 - One-on-one 

(2 Questions)

  • Q1. Components of Transformer
  • Ans. 

    Components of a transformer include core, windings, and insulation.

    • Core: Provides a path for magnetic flux

    • Windings: Primary and secondary coils for inducing voltage

    • Insulation: Prevents short circuits and ensures safety

  • Answered by AI
  • Q2. Question based on series and parallel resistance
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Basic electronics and electrical questions

Round 2 - Group Discussion 

Topic is About GenC and GenX

Interview Questionnaire 

3 Questions

  • Q1. Lighting Levels for Indoor and outdoor, and calculation procedure
  • Ans. 

    Lighting levels for indoor and outdoor areas are determined based on the purpose of the space and the activities that take place.

    • Indoor lighting levels are typically measured in foot-candles or lux

    • Outdoor lighting levels are typically measured in lumens per square meter

    • Calculation procedures involve determining the required illuminance level for the space and selecting appropriate light fixtures and bulbs

    • Factors such a...

  • Answered by AI
  • Q2. Datasheet paramaters for equipment such and transformers and motors.
  • Q3. Cable glands and their application as per area
  • Ans. 

    Cable glands are used to secure and seal cables in various applications based on the area of installation.

    • Cable glands are used in hazardous areas to prevent the entry of flammable gases and liquids.

    • In outdoor applications, cable glands are used to protect cables from moisture and dust.

    • In industrial settings, cable glands are used to secure cables and prevent them from being pulled out.

    • Different types of cable glands a...

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
-

I was interviewed in Apr 2024.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Control Valve sizing
  • Q2. Flowmeter selection
Round 2 - HR 

(2 Questions)

  • Q1. Reason for shifting
  • Ans. 

    I shifted to pursue new opportunities for growth and development in my career.

    • Seeking new challenges and responsibilities

    • Exploring different industries or technologies

    • Relocation for personal reasons or family commitments

  • Answered by AI
  • Q2. Expected salary

I applied via Naukri.com and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. The HR round was very pathetic. Sreethala took my HR round.

Interview Preparation Tips

Interview preparation tips for other job seekers - Please don't waste your precious time in giving the interview for Baker Hughes, Powai
Mumbai location. They will take all the interview rounds. The HR will ask you to submit all documents and last moment they will cancel your candidature without giving you any specific reason.
Contribute & help others!
anonymous
You can choose to be anonymous

Technip Energies Interview FAQs

How many rounds are there in Technip Energies Electrical Engineer interview?
Technip Energies interview process usually has 2-3 rounds. The most common rounds in the Technip Energies interview process are Technical, Resume Shortlist and HR.
How to prepare for Technip Energies Electrical Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Technip Energies. The most common topics and skills that interviewers at Technip Energies expect are Electrical Engineering, Metering, Electricals, Single Line Diagram and Substation.
What are the top questions asked in Technip Energies Electrical Engineer interview?

Some of the top questions asked at the Technip Energies Electrical Engineer interview -

  1. What is the process of battery sizing calculat...read more
  2. What are the internal testing of transform...read more
  3. What is the need of earth wir...read more

Recently Viewed

INTERVIEWS

Aker Solutions

No Interviews

INTERVIEWS

ICICI Securities

No Interviews

LIST OF COMPANIES

Futures First info Services

Overview

JOBS

London Stock Exchange Group

No Jobs

SALARIES

Bonfiglioli Transmissions Private Limited

INTERVIEWS

Mahalaxmi TMT

No Interviews

INTERVIEWS

Saint-Gobain

No Interviews

SALARIES

London Stock Exchange Group

INTERVIEWS

Torrent Power

No Interviews

INTERVIEWS

AtkinsRealis

No Interviews

Tell us how to improve this page.

Technip Energies Electrical Engineer Interview Process

based on 3 interviews

1 Interview rounds

  • Technical Round
View more
Technip Energies Electrical Engineer Salary
based on 46 salaries
₹4.3 L/yr - ₹11.2 L/yr
74% more than the average Electrical Engineer Salary in India
View more details

Technip Energies Electrical Engineer Reviews and Ratings

based on 6 reviews

3.9/5

Rating in categories

3.6

Skill development

3.8

Work-life balance

3.5

Salary

3.2

Job security

3.5

Company culture

3.0

Promotions

3.3

Work satisfaction

Explore 6 Reviews and Ratings
Process Engineer
125 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
117 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Principal Engineer
108 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Piping Designer
99 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
92 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Technip Energies with

L&T Energy Hydrocarbon

3.8
Compare

Baker Hughes

4.0
Compare

McDermott International

4.3
Compare

Saipem

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent