Tata Motors
Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards
Filter interviews by
The type of oil to put in the gear box depends on the make and model of the vehicle.
Check the owner's manual for the recommended oil type and viscosity
Use a high-quality oil that meets the manufacturer's specifications
Ensure the oil level is correct before driving the vehicle
Regularly check and change the oil according to the manufacturer's recommendations
The voltage in a 3 phase system depends on the specific application and can vary widely.
The voltage in a 3 phase system can range from 208 volts to 480 volts in commercial and industrial applications.
In residential applications, the voltage is typically 240 volts.
The voltage can also vary depending on the country and region.
It is important to consult the specific electrical system and application to determine the volta
MCB stands for Miniature Circuit Breaker.
MCB is an electrical switch that automatically turns off the electrical circuit during an overload or short circuit.
It is a type of circuit breaker that is commonly used in residential and commercial buildings.
MCBs are available in different current ratings and can be easily replaced if they trip.
Examples of MCB brands include Schneider Electric, Legrand, and Siemens.
The number of bearings in a motor varies depending on the type and size of the motor.
The number of bearings in a motor can range from 2 to 8 or more.
Larger motors typically have more bearings than smaller ones.
The type of motor also affects the number of bearings it has.
For example, a three-phase induction motor typically has two bearings, while a DC motor may have four or more.
The bearings in a motor are used to suppo...
Least count of Bernier caliper is 0.02 mm.
Bernier caliper is a precision measuring tool used to measure the diameter of objects.
The least count is the smallest measurement that can be read on the scale.
For Bernier caliper, the least count is 0.02 mm.
This means that the caliper can measure up to 0.02 mm accuracy.
The least count of a micro meter is typically 0.01 mm or 0.001 cm.
The least count is the smallest measurement that can be read on the instrument.
In the case of a micro meter, the least count is usually 0.01 mm or 0.001 cm.
This means that the instrument can measure to a precision of 0.01 mm or 0.001 cm.
To get an accurate measurement, it is important to read the instrument carefully and take into account the least count.
I applied via Walk-in and was interviewed in Dec 2024. There were 3 interview rounds.
Group discussion is a very important tool in addressing various problems.
There are mainly two types of vernier calipers: standard vernier caliper and digital vernier caliper.
Standard vernier caliper
Digital vernier caliper
Measurements in micrometers are used for very small distances.
Micrometers are commonly used in precision engineering and manufacturing.
1 micrometer is equal to 0.001 millimeters.
Examples of measurements in micrometers include the thickness of a human hair (around 70 micrometers) and the width of a red blood cell (around 8 micrometers).
Quality in engineering refers to the characteristics of a product or service that meet or exceed customer expectations.
Quality in engineering involves meeting specifications, standards, and requirements.
It includes ensuring reliability, durability, and performance of the product or service.
Quality control measures such as inspections, testing, and audits are used to maintain and improve quality.
Continuous improvement p...
Quality Control (QC) involves a series of steps to ensure products meet quality standards.
1. Establish quality standards and specifications for the product.
2. Create a quality control plan outlining inspection procedures and criteria.
3. Perform inspections and tests during production to identify defects.
4. Implement corrective actions to address any issues found.
5. Monitor and evaluate the effectiveness of the quality ...
I was interviewed in Jan 2025.
Artificial intelligence is the simulation of human intelligence processes by machines, especially computer systems.
AI involves machines learning from data, recognizing patterns, and making decisions.
Examples of AI include virtual assistants like Siri and Alexa, self-driving cars, and recommendation systems like Netflix.
AI can be categorized into narrow AI (focused on a narrow task) and general AI (possessing human-like
Artificial intelligence is the simulation of human intelligence processes by machines, especially computer systems.
AI involves machines learning from data, recognizing patterns, and making decisions.
Examples include virtual assistants like Siri and Alexa, self-driving cars, and recommendation systems like Netflix.
AI can be categorized into narrow AI (focused on a narrow task) and general AI (possessing human-like intel
Tata Group is an Indian multinational conglomerate with businesses in various sectors including automotive, steel, and IT services.
Founded in 1868 by Jamsetji Tata
Headquartered in Mumbai, India
Operates in over 100 countries
Owns companies like Tata Motors, Tata Steel, and Tata Consultancy Services (TCS)
Tata Interested is a business conglomerate with interests in various industries such as automotive, steel, telecommunications, and more.
Tata Motors is a subsidiary of Tata Interested, known for producing cars like Tata Nano and Tata Indica.
Tata Steel is another subsidiary, one of the largest steel producers globally.
Tata Consultancy Services (TCS) is a leading IT services company under the Tata Interested umbrella.
Tata...
The I am new students of Tata company to aptitude if Tata company test
Tata Motors interview questions for popular designations
There are mainly two types of gearboxes - manual and automatic.
Manual gearbox: Requires the driver to manually shift gears using a clutch pedal and gear stick.
Automatic gearbox: Shifts gears automatically without the need for manual input from the driver.
Other types include CVT (Continuously Variable Transmission) and DCT (Dual Clutch Transmission).
Manual transmission requires the driver to manually shift gears, while automatic transmission shifts gears automatically.
Manual transmission requires the driver to use a clutch pedal and shift gears manually
Automatic transmission shifts gears automatically without the need for manual input
Manual transmission provides more control over the vehicle's performance, while automatic transmission is easier to use in traffic
Ma...
Topic is given the interview provide a topic which can we technical or general
Hub play and jam reduction
In an Automobile gearbox issue like her wear excessive play and jamming can need to performance degradation noise and even failure reducing this issues improves gear engagement transmission efficiency and overall vehicle performance
Get interview-ready with Top Tata Motors Interview Questions
I am a data analyst with a strong background in statistics and data visualization.
Experienced in analyzing large datasets to extract valuable insights
Proficient in statistical analysis and data visualization tools such as Python, R, and Tableau
Strong problem-solving skills and attention to detail
Excellent communication skills to present findings to stakeholders
My city is a vibrant and diverse urban center with a rich history and cultural heritage.
Located in the northeastern region of the country
Known for its historic landmarks such as the Old Town Square and Cathedral
Home to a thriving arts and music scene
Diverse population with a mix of different ethnicities and cultures
I am a data analyst with a strong background in statistics and data visualization.
Experienced in analyzing large datasets to extract valuable insights
Proficient in using statistical tools such as R and Python
Skilled in creating interactive dashboards using Tableau
Strong communication skills to present findings to stakeholders
I have 3 years of experience as a Data Analyst in a tech company.
Analyzed large datasets to extract valuable insights
Created visualizations and reports to communicate findings
Collaborated with cross-functional teams to drive data-driven decision making
I applied via Job Portal
The working process step by step involves planning, executing, monitoring, and evaluating tasks to achieve desired outcomes.
1. Planning: Identify goals, set objectives, and create a timeline.
2. Execution: Carry out tasks according to the plan.
3. Monitoring: Track progress, identify any issues, and make adjustments as needed.
4. Evaluation: Assess the results against the initial goals and objectives.
5. Reflection: Learn ...
I applied via Company Website and was interviewed in Oct 2024. There was 1 interview round.
A data entry operator is responsible for inputting, updating, and maintaining information in computer systems.
Inputting data accurately and efficiently
Updating and maintaining databases
Ensuring data quality and integrity
Following data entry procedures and guidelines
Using software tools for data entry tasks
Different types of operations include data entry, data processing, data verification, and data analysis.
Data entry involves inputting data into a system or database.
Data processing involves manipulating and organizing data to generate meaningful information.
Data verification involves checking the accuracy and completeness of data.
Data analysis involves interpreting data to extract insights and make informed decisions.
Data entry operators are responsible for inputting, updating, and maintaining accurate information in databases and systems.
Inputting data accurately and efficiently
Updating and maintaining databases
Ensuring data quality and integrity
Generating reports and analyzing data
Transferring data between systems
Organizing and managing data files
Arithmetical operators are used in data entry to perform mathematical calculations on numerical data.
Arithmetical operators include addition (+), subtraction (-), multiplication (*), division (/), and modulus (%)
Operators are used to perform calculations on numerical data entered into the system
For example, to add two numbers (5 + 3), the operator '+' is used in data entry
Data entry level can be created by setting up a structured system for entering and organizing data.
Establish clear guidelines for data entry procedures
Provide training on data entry software and tools
Implement quality control measures to ensure accuracy of data
Create templates for consistent data entry format
Regularly review and update data entry processes
Example: Using Excel spreadsheets for entering and organizing da...
Arithmetical operators are used by data entry operators to perform mathematical calculations.
Data entry operators use arithmetical operators like + (addition), - (subtraction), * (multiplication), / (division) to perform calculations.
Operators follow the order of operations (PEMDAS) to determine the sequence of calculations.
Parentheses can be used to specify the order of operations.
Operators can be used to calculate to...
A data entry operator is created by hiring individuals with strong typing skills and attention to detail.
Hire individuals with strong typing skills
Provide training on data entry software and processes
Emphasize the importance of accuracy and attention to detail
Monitor performance and provide feedback for improvement
I applied via Naukri.com and was interviewed in Nov 2024. There was 1 interview round.
I applied via Company Website and was interviewed in Dec 2024. There was 1 interview round.
Technology is the application of scientific knowledge for practical purposes, often involving the use of tools, systems, and devices.
Technology encompasses a wide range of tools and systems used to solve problems or achieve goals.
It includes hardware (such as computers, smartphones, and robots) and software (such as apps, websites, and operating systems).
Technology is constantly evolving and improving, leading to advan...
Our company sales have been steadily increasing year over year, with a focus on building strong relationships with clients.
Year over year sales growth
Focus on building strong client relationships
Utilization of targeted marketing strategies
Expansion into new markets
Introduction of innovative products/services
The duration of Tata Motors interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 1.2k interviews
Interview experience
based on 12k reviews
Rating in categories
Senior Manager
6.2k
salaries
| â‚ą0 L/yr - â‚ą0 L/yr |
Deputy General Manager
850
salaries
| â‚ą0 L/yr - â‚ą0 L/yr |
Executive
818
salaries
| â‚ą0 L/yr - â‚ą0 L/yr |
Manager
415
salaries
| â‚ą0 L/yr - â‚ą0 L/yr |
Territory Sales Manager
410
salaries
| â‚ą0 L/yr - â‚ą0 L/yr |
Maruti Suzuki
Mahindra & Mahindra
Mercedes-Benz Research and Development India
Ashok Leyland