Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Tata AutoComp Systems Team. If you also belong to the team, you can get access from here

Tata AutoComp Systems Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Tata AutoComp Systems Production Line Incharge Interview Questions and Answers

Updated 27 Nov 2021

Tata AutoComp Systems Production Line Incharge Interview Experiences

1 interview found

I applied via Walk-in and was interviewed in May 2021. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. What you do when line is stopped due to some reason ?
  • Ans. 

    I will immediately investigate the reason for the stoppage and take necessary actions to resume production.

    • Check the machinery and equipment for any malfunctions or breakdowns

    • Identify the root cause of the stoppage

    • Coordinate with maintenance team to fix the issue

    • Ensure safety protocols are followed during the restart process

    • Communicate the status of the line to the management and other relevant departments

  • Answered by AI
  • Q2. I said first of all ,I see why line is what is problem and trying to solve it.
  • Q3. What happen when so much rejection found in your shift?
  • Ans. 

    When there is a high rejection rate in my shift, I take immediate action to identify the root cause and implement corrective measures.

    • Analyze rejected products to determine the common issues

    • Investigate the production process to identify any equipment or material issues

    • Collaborate with the quality control team to implement necessary changes

    • Train and educate the production line staff to minimize errors

    • Monitor the product...

  • Answered by AI
  • Q4. Nothing wrong ,try to rework and maintain quality as much as and see why rejection found.

Interview Preparation Tips

Interview preparation tips for other job seekers - 1-Just stay calm
2-when he says any questions=>then remember first and after remembering correctly just give them, or if you don't know about question and answer don't speak and dont try to giving them answer

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview in Dec 2023.

Round 1 - HR 

(2 Questions)

  • Q1. 5s 3s safety fire
  • Q2. 4m 3m your team member

Interview Preparation Tips

Interview preparation tips for other job seekers - You are 5s mainten follow the ppe 3s 3m

I applied via Job Fair and was interviewed before Mar 2021. There were 2 interview rounds.

Round 1 - Case Study 

I am graduation in Mechanical Engineering and also done my diploma mechanical automobile in ghaziabad

Round 2 - HR 

(1 Question)

  • Q1. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - I am working in denso India pvt Ltd as a line leader in production department in Armature assembly in honda bs 6 model

I applied via Campus Placement and was interviewed before Sep 2021. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. Basic questions introduction
  • Q2. Introduction experience

Interview Preparation Tips

Topics to prepare for Lumax Industries Junior Engineer interview:
  • Production
  • TPM Activities
  • 4m
Interview preparation tips for other job seekers - Lumax is skill learning company growth your career and experience

I applied via Job Fair and was interviewed before Mar 2021. There were 2 interview rounds.

Round 1 - Case Study 

I am graduation in Mechanical Engineering and also done my diploma mechanical automobile in ghaziabad

Round 2 - HR 

(1 Question)

  • Q1. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - I am working in denso India pvt Ltd as a line leader in production department in Armature assembly in honda bs 6 model

I applied via Recruitment Consultant and was interviewed before Jun 2020. There was 1 interview round.

Interview Questionnaire 

7 Questions

  • Q1. Which types of lacquer used on lens and Housing ?
  • Ans. 

    The types of lacquer used on lens and housing include acrylic lacquer, polyurethane lacquer, and epoxy lacquer.

    • Acrylic lacquer is commonly used on lens and housing due to its high transparency and UV resistance.

    • Polyurethane lacquer provides excellent durability and chemical resistance, making it suitable for lens and housing.

    • Epoxy lacquer offers superior adhesion and impact resistance, making it a preferred choice for

  • Answered by AI
  • Q2. What is size fine filter ?
  • Ans. 

    A size fine filter is a type of filter used to remove small particles or impurities from a fluid or gas.

    • Size fine filters are commonly used in industries such as manufacturing, pharmaceuticals, and food processing.

    • They are designed to capture particles that are smaller than what can be filtered by regular filters.

    • These filters can be made of various materials such as paper, fabric, or synthetic fibers.

    • Examples of size ...

  • Answered by AI
  • Q3. On which material direct metalizing is applicable ?
  • Ans. 

    Direct metalizing is applicable on materials that can conduct electricity.

    • Direct metalizing is a process of coating a non-metallic surface with a thin layer of metal.

    • The material should be able to conduct electricity for direct metalizing to be applicable.

    • Materials like plastic, glass, and ceramics can be direct metalized.

    • Direct metalizing is commonly used in the automotive, aerospace, and electronics industries.

  • Answered by AI
  • Q4. PC Material
  • Q5. How much UV energy is required for curing?
  • Ans. 

    The amount of UV energy required for curing depends on the type of material being cured and the intensity of the UV light.

    • UV energy required for curing varies depending on the material being cured

    • Intensity of the UV light also affects the amount of energy required

    • UV energy is typically measured in Joules per square centimeter (J/cm²)

    • Examples of materials that require UV curing include adhesives, coatings, and inks

  • Answered by AI
  • Q6. 2500 ~ 3500
  • Q7. How much DFT is required as per standard ?
  • Ans. 

    The amount of DFT required as per standard varies depending on the specific industry and project requirements.

    • The required amount of DFT (Design for Testability) is determined by industry standards and project specifications.

    • Different industries may have different standards for DFT.

    • The complexity and size of the project also influence the amount of DFT required.

    • DFT techniques include scan chains, built-in self-test (BI...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - It must be done as like process catroled

I applied via Campus Placement and was interviewed before Mar 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Face to face depend on interview skill and confidence
  • Q2. Skill and communication in the opportunity in the company
Round 3 - HR 

(2 Questions)

  • Q1. Why should we hire you?
  • Ans. 

    I have a strong background in production engineering and a proven track record of improving efficiency and reducing costs.

    • I have a Bachelor's degree in Production Engineering and have completed internships at two leading manufacturing companies.

    • I have successfully implemented process improvements that resulted in a 20% increase in production output at my previous job.

    • I am skilled in using various production software an...

  • Answered by AI
  • Q2. I am working in denso India pvt Ltd I am working in honsety and I am also good confidence and hardworking

Interview Preparation Tips

Interview preparation tips for other job seekers - I am Shivam Singh from Mainpuri Uttar Pradesh.i have complete graduation in Mechanical Engineering and also done my diploma in Mechanical Automobile in ghaziabad I am working in denso India pvt Ltd as a diploma apprentice training.
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Jan 2022.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Self introduction its very important
  • Q2. Subject Questions Technical Questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep your self confidence
research about company, speak clearly

I applied via Naukri.com and was interviewed before Oct 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. About Location

Interview Preparation Tips

Interview preparation tips for other job seekers - Location is good and no other facilities

I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(8 Questions)

  • Q1. What are your salary expectations?
  • Q2. What is your family background?
  • Q3. Share details of your previous job.
  • Q4. Why should we hire you?
  • Q5. Why are you looking for a change?
  • Q6. Where do you see yourself in 5 years?
  • Q7. What are your strengths and weaknesses?
  • Q8. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - Production opretor, maintenance

Tata AutoComp Systems Interview FAQs

What are the top questions asked in Tata AutoComp Systems Production Line Incharge interview?

Some of the top questions asked at the Tata AutoComp Systems Production Line Incharge interview -

  1. What you do when line is stopped due to some reaso...read more
  2. I said first of all ,I see why line is what is problem and trying to solve ...read more
  3. Nothing wrong ,try to rework and maintain quality as much as and see why reject...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

UNO Minda Interview Questions
4.0
 • 176 Interviews
Exide Industries Interview Questions
3.5
 • 174 Interviews
Ceat Tyres Interview Questions
4.0
 • 166 Interviews
Apollo Tyres Interview Questions
4.0
 • 132 Interviews
Hitachi Astemo Interview Questions
4.1
 • 106 Interviews
DENSO Interview Questions
4.1
 • 77 Interviews
CIE Automotive Interview Questions
3.6
 • 76 Interviews
JTEKT Interview Questions
4.1
 • 66 Interviews
Hyundai Mobis Interview Questions
3.8
 • 64 Interviews
View all
Tata AutoComp Systems Production Line Incharge Salary
based on 6 salaries
₹1.1 L/yr - ₹2.9 L/yr
27% less than the average Production Line Incharge Salary in India
View more details

Tata AutoComp Systems Production Line Incharge Reviews and Ratings

based on 1 review

4.0/5

Rating in categories

4.0

Skill development

4.0

Work-life balance

4.0

Salary

5.0

Job security

5.0

Company culture

4.0

Promotions

4.0

Work satisfaction

Explore 1 Review and Rating
Assistant Manager
401 salaries
unlock blur

₹4.3 L/yr - ₹13.9 L/yr

Senior Engineer
221 salaries
unlock blur

₹3.5 L/yr - ₹10.5 L/yr

Senior Design Engineer
179 salaries
unlock blur

₹3.7 L/yr - ₹13.5 L/yr

Deputy Manager
156 salaries
unlock blur

₹6 L/yr - ₹20.2 L/yr

Design Engineer
140 salaries
unlock blur

₹2.4 L/yr - ₹8 L/yr

Explore more salaries
Compare Tata AutoComp Systems with

Ceat Tyres

4.0
Compare

UNO Minda

4.0
Compare

Apollo Tyres

4.0
Compare

Exide Industries

3.5
Compare
Did you find this page helpful?
Yes No
write
Share an Interview