Filter interviews by
I applied via Walk-in
Fire fighting pump in auto works by drawing water from a source and pressurizing it to create a high-pressure stream for firefighting purposes.
The pump draws water from a source such as a tank or hydrant using an intake valve.
The water is then pressurized by the pump to create a high-pressure stream that can be used to extinguish fires.
The pump may be powered by the vehicle's engine or by a separate power source.
Some f...
The fire alarm system is activated when smoke or heat is detected, or manually by pulling the fire alarm switch.
Activated automatically when smoke or heat is detected
Activated manually by pulling the fire alarm switch
May also be activated by a centralized control panel
The diesel engine in the fire pump room starts automatically when there is a loss of power.
The diesel engine starts when there is a power outage to ensure continuous operation of the fire pump.
It is designed to kick in automatically to maintain water pressure in case of emergencies.
Regular maintenance and testing of the diesel engine is crucial to ensure it functions properly during emergencies.
A fire exhaust system works by removing smoke, heat, and gases from a building to prevent the spread of fire and protect occupants.
The system typically includes exhaust fans, ductwork, and dampers to control airflow.
Smoke detectors trigger the system to start operating when a fire is detected.
The system helps maintain a safe environment for occupants and allows firefighters to access the building more easily.
I applied via Job Fair and was interviewed in Jun 2024. There were 2 interview rounds.
Sfd & Bmd diagrams show the variation of shear force and bending moment along the length of a beam.
SFD (Shear Force Diagram) shows the variation of shear force along the length of a beam.
BMD (Bending Moment Diagram) shows the variation of bending moment along the length of a beam.
SFD is obtained by integrating the distributed load on the beam.
BMD is obtained by integrating the shear force diagram.
I applied via Referral and was interviewed in Mar 2024. There was 1 interview round.
Sterling interview questions for popular designations
I applied via LinkedIn and was interviewed in Dec 2023. There was 1 interview round.
Auguring for earth pit involves drilling a hole in the ground to create a space for the earth pit.
Auguring is a process of drilling a hole using an auger machine.
The size of the hole depends on the requirements of the earth pit.
The depth of the hole is usually determined by the type of soil and the purpose of the earth pit.
After auguring, the earth pit is usually filled with a mixture of salt and charcoal to improve co
To assemble a transformer step by step, first prepare the core, wind the coils, connect the coils, insulate the coils, and finally enclose the transformer in a casing.
Prepare the core by stacking and aligning the laminated steel sheets.
Wind the primary and secondary coils around the core, ensuring proper insulation between the layers.
Connect the coils to the appropriate terminals, ensuring correct polarity.
Insulate the...
Get interview-ready with Top Sterling Interview Questions
I applied via Naukri.com
I applied via Naukri.com and was interviewed in Dec 2023. There was 1 interview round.
SLD stands for Single Line Diagram. It is a simplified representation of an electrical power system.
SLD is a graphical representation of the electrical system, showing the flow of power and the components involved.
It uses standardized symbols to represent various electrical devices such as transformers, generators, circuit breakers, etc.
SLD helps in understanding the overall structure and connectivity of the electrical...
True. DG (Diesel Generator) and HVAC (Heating, Ventilation, and Air Conditioning) systems have different working principles.
DG works by converting diesel fuel into mechanical energy, which is then converted into electrical energy.
HVAC systems control the temperature, humidity, and air quality in a building by using principles of thermodynamics and fluid mechanics.
DG systems are commonly used as backup power sources in ...
I applied via Approached by Company and was interviewed in Dec 2023. There were 2 interview rounds.
I applied via Job Portal and was interviewed in Dec 2023. There was 1 interview round.
Before placing a power transformer on foundation, we need to check several things.
Check the transformer's weight and ensure that the foundation can support it
Inspect the transformer for any damage during transportation
Check the oil level and quality
Verify the electrical connections and grounding
Ensure that the transformer is properly aligned on the foundation
Perform insulation resistance tests
Check the cooling system
Ve...
We have constructed a 220 kV outdoor substation.
The substation is designed to receive power from the transmission grid and distribute it to the local distribution network.
It includes transformers, circuit breakers, disconnect switches, and other equipment.
The substation is located in an open area and is designed to withstand harsh weather conditions.
We followed all safety regulations and guidelines during the construct...
Case of 33 kV main incomer operation by remote.
The duration of Sterling interview process can vary, but typically it takes about 2-4 weeks to complete.
based on 51 interviews
Interview experience
based on 423 reviews
Rating in categories
Specialist
161
salaries
| ₹0 L/yr - ₹0 L/yr |
Verification Specialist
61
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Verification Specialist
21
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Associate
20
salaries
| ₹0 L/yr - ₹0 L/yr |
Background Verification Specialist
19
salaries
| ₹0 L/yr - ₹0 L/yr |
Tata Group
Reliance Industries
Aditya Birla Group
Mahindra & Mahindra