AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Slr Metaliks Interview Questions, Process, and Tips
Top Slr Metaliks Interview Questions and Answers
- Q1. 1)How to know stave cooling water leakage..?asked in Blast Furnace Operation Engineer interview
- Q2. What Type of fire extinguisherasked in Fire & Safety Officer interview
- Q3. How many types of fire extinguisherasked in Shift Incharge interview
Slr Metaliks Interview Experiences
20 interviews found
Anonymous
Interview Questionnaire
8 Questions
- Q1. 1)How to know stave cooling water leakage..?
- Ans.
To detect stave cooling water leakage, various methods can be used such as visual inspection, pressure testing, temperature monitoring, and dye testing.
Perform regular visual inspections of the stave cooling system to check for any visible signs of leakage such as water stains or wet spots.
Conduct pressure testing by isolating sections of the cooling system and applying pressure to detect any drop in pressure, indicati...
- Q2. 2. 50/15 ton crane make?
- Ans.
The make of the 50/15 ton crane is not specified in the question.
The question does not provide information about the make of the crane.
It is important to know the make of the crane for maintenance and repair purposes.
Different makes of cranes may have different specifications and capabilities.
Examples of crane makes include Liebherr, Konecranes, and Demag.
- Q3. 3. How much BF Gas flow
- Ans.
The BF gas flow depends on various factors such as the size of the blast furnace, the type of fuel used, and the production rate.
BF gas flow is measured in cubic meters per hour (m3/h)
The flow rate can range from 1,000 to 10,000 m3/h depending on the size of the blast furnace
The type of fuel used can also affect the BF gas flow. For example, coke produces more gas than coal
The production rate of the blast furnace also ...
- Q4. Which type of fur furnace and capacity
- Ans.
The type and capacity of the blast furnace depend on the specific requirements of the operation.
The type of blast furnace can vary based on factors such as the type of fuel used, the desired output, and the available resources.
Common types of blast furnaces include coke-fired, charcoal-fired, and electric arc furnaces.
Capacity can range from small-scale furnaces used for research and development to large-scale industri...
- Q5. Blower capacity and which type of bearing used in mono block and why
- Ans.
Blower capacity and type of bearing used in mono block are important factors for efficient blast furnace operation.
Blower capacity determines the amount of air required for combustion in the blast furnace.
Mono block bearings are used in blowers due to their high load carrying capacity and low maintenance requirements.
Roller bearings are commonly used in mono block bearings due to their ability to handle heavy loads and...
- Q6. Which type of oil used in power pack and gearbox
- Ans.
The type of oil used in power pack and gearbox depends on the specific requirements of the equipment.
The oil used in power pack and gearbox should have good lubrication properties to reduce friction and wear.
The oil should also have good thermal stability to withstand high temperatures.
The viscosity of the oil should be appropriate for the equipment and operating conditions.
Examples of oils used in power pack and gearb...
- Q7. Furnace top equipment's
- Q8. Cylinder size to useLower bell upper bell
- Ans.
The cylinder size for lower and upper bell depends on the blast furnace size and production requirements.
The size of the cylinder should be chosen based on the blast furnace size and production requirements.
A larger cylinder can increase production but may require more energy and maintenance.
The material of the cylinder should also be considered for durability and heat resistance.
Consult with experts and follow industr...
Top Slr Metaliks Blast Furnace Operation Engineer Interview Questions and Answers
Blast Furnace Operation Engineer Interview Questions asked at other Companies
I was interviewed in Dec 2024.
1. Capex accounting : Starting process up to Capitalisation, (Budget, Capex Approval, Create CWIP Asset code, PR, PO, GRN, Internal order Settlement, Finally Asset capitalisation.
2. Raw material bill posting of Imported and Domestic accounts related transactions, and Imported material details, Exchange gain/Loss calculation,
Second round interview with the Vice President of Accounts and three section heads, discussion with all TDS, TCS, Sections, and Inter unit reconciliation, RM & Fuel Quarterly third party PV Report, Penalty/Bonus working and parameters of RM & Fuel,
(2 Questions)
- Q1. Salary negotiation round.
- Q2. HR Person not having calculation knowledge. Not able to understand Company accommodation, Also shown Form 16 Also.
Accounts Manager Interview Questions asked at other Companies
(2 Questions)
- Q1. What's your current responsibility & achievements?
- Ans.
Currently responsible for overseeing quality assurance and driving process improvements. Achievements include reducing defects by 20% and implementing a new QA system.
Overseeing quality assurance processes
Driving process improvements
Reducing defects by 20%
Implementing a new QA system
- Q2. How you will prove that your position suits our requirements?
- Ans.
I have extensive experience in quality assurance and management, with a proven track record of meeting and exceeding requirements in previous roles.
Demonstrate my experience in quality assurance and management roles
Highlight specific achievements where I met or exceeded requirements
Discuss relevant skills and qualifications that align with the requirements of the deputy manager-QAD position
(2 Questions)
- Q1. Project related
- Q2. Thermodynamics laws
Engineer Interview Questions asked at other Companies
Slr Metaliks interview questions for popular designations
(1 Question)
- Q1. Roles and responsibilities
(1 Question)
- Q1. Experience & Qualification
Get interview-ready with Top Slr Metaliks Interview Questions
(1 Question)
- Q1. Mechanical works questions
(2 Questions)
- Q1. Mechanical works questions
- Q2. Gearbox and Alaymint
Jobs at Slr Metaliks
I applied via Approached by Company and was interviewed in Aug 2023. There were 3 interview rounds.
(5 Questions)
- Q1. Asked questions regarding family details,
- Q2. How many family members are there in your family?
- Ans.
There are four members in our family
- Q3. Are you a bachelor or married ?
- Q4. What is your wife occupation?
- Q5. How many kids do you have?
- Ans.
I have two children Girl and a boy.
Asked questions regarding job profile, job role and equipments and spares we maintain.
Interview Preparation Tips
Now a days cracking an interview is not so much easy, There was a time where we can easily join a company in our experience basis, but now a days it's not like that,you must be able to face any kind of questions.
Mechanical Maintenance Engineer Interview Questions asked at other Companies
Selected
I applied via Naukri.com and was interviewed in May 2023. There were 2 interview rounds.
(2 Questions)
- Q1. Vernier calliper least count
- Ans.
Vernier caliper least count is the smallest measurement that can be read on the scale of a vernier caliper.
The least count of a vernier caliper is determined by the number of divisions on the main scale and the vernier scale.
It is calculated by dividing the smallest division on the main scale by the total number of divisions on the vernier scale.
For example, if the main scale has divisions of 1 mm and the vernier scale...
- Q2. Least count is .01mm
- Ans.
The least count of .01mm means that the smallest measurement that can be accurately read is .01mm.
Least count refers to the smallest measurement that can be accurately read on a measuring instrument.
In this case, with a least count of .01mm, the instrument can accurately measure to the nearest .01mm.
For example, if a measurement reads 5.23mm, the instrument can accurately measure up to 5.24mm but not beyond that.
Production Graduate Engineer Trainee Interview Questions asked at other Companies
I applied via Company Website and was interviewed in Aug 2022. There were 3 interview rounds.
(4 Questions)
- Q1. Tell me about your self?
- Q2. Family background question like what my parents do, what my brother do?
- Q3. My previous work company related questions
- Q4. My present company related questions like do you know about slr metaliks ltd, slr metaliks main products etc
(7 Questions)
- Q1. Centrifugal pump & reciprocating pump different
- Ans.
Centrifugal pumps use impellers to create a flow, while reciprocating pumps use pistons or diaphragms to create pressure.
Centrifugal pumps are more commonly used for high flow rate, low pressure applications.
Reciprocating pumps are better suited for high pressure, low flow rate applications.
Centrifugal pumps are generally more efficient than reciprocating pumps.
Examples of centrifugal pumps include water pumps and sewa...
- Q2. What is bearing?type of bearing? identify bearing like -30215
- Ans.
A bearing is a machine element that constrains relative motion to only the desired motion and reduces friction between moving parts.
Bearings are used in various applications such as automobiles, airplanes, and industrial machinery.
There are different types of bearings such as ball bearings, roller bearings, and plain bearings.
30215 is a tapered roller bearing commonly used in automotive and industrial applications.
- Q3. Gear box use? Gear box check list ? Which company gear box use
- Ans.
Gear boxes are used in various machines to control speed and torque. Different companies manufacture gear boxes with varying specifications.
Gear boxes are used in automobiles, industrial machinery, and wind turbines.
A gear box checklist includes checking for leaks, proper lubrication, and wear and tear of gears.
Companies like Siemens, Bonfiglioli, and SEW Eurodrive manufacture gear boxes.
The choice of gear box depends
- Q4. Belt specifications , conveyor belt maintenance question, type of safety use in conveyor line etc
- Q5. Motor specifications, company name
- Q6. Previous company Compressor pressure, motor power , motor rpm
- Q7. V -belt 1 break then what you do 1 belt change or a set of belt change
Interview Preparation Tips
Engineer Interview Questions asked at other Companies
I applied via Approached by Company and was interviewed in May 2023. There were 3 interview rounds.
HOD Technical and Major Achivement
(2 Questions)
- Q1. Work Experience and CTC
- Q2. Experience, knowledge and Background details
Assistant Manager Interview Questions asked at other Companies
Vinay Vinni
Selected
I applied via Walk-in and was interviewed before Aug 2023. There were 2 interview rounds.
(2 Questions)
- Q1. Regarding about your education qualification
- Q2. About your favourite subject
(2 Questions)
- Q1. What is difference between hard work and smart work
- Ans.
Hard work involves putting in a lot of effort and time, while smart work focuses on achieving goals efficiently and effectively.
Hard work is about working long hours and putting in a lot of effort, often without a clear strategy.
Smart work involves working efficiently by prioritizing tasks, delegating when necessary, and using resources effectively.
Hard work may lead to burnout and exhaustion, while smart work helps in...
- Q2. Tell me about how to handle situation in work
- Ans.
Handling situations at work involves staying calm, assessing the problem, communicating effectively, and finding a solution.
Stay calm and composed to think clearly
Assess the situation to understand the problem
Communicate effectively with team members or supervisors
Find a solution by brainstorming ideas and implementing the best course of action
Interview Preparation Tips
Top trending discussions
Slr Metaliks Interview FAQs
The duration of Slr Metaliks interview process can vary, but typically it takes about less than 2 weeks to complete.
Tell us how to improve this page.
Slr Metaliks Interviews By Designations
- Slr Metaliks Engineer Interview Questions
- Slr Metaliks Mechanical Maintenance Engineer Interview Questions
- Slr Metaliks Technician Interview Questions
- Slr Metaliks Manager - HR & Administration Interview Questions
- Slr Metaliks Assistant Manager Interview Questions
- Slr Metaliks Senior Technician Interview Questions
- Slr Metaliks Supervisor Interview Questions
- Slr Metaliks Shift Incharge Interview Questions
- Show more
Interview Questions for Popular Designations
- Senior Executive Interview Questions
- Software Engineer Interview Questions
- Software Developer Interview Questions
- Associate Software Engineer Interview Questions
- Accountant Interview Questions
- Java Developer Interview Questions
- Test Engineer Interview Questions
- Senior Software Engineer Interview Questions
- Show more
Slr Metaliks Interview Process
based on 12 interviews
Interview experience
Interview Questions from Similar Companies
Slr Metaliks Reviews and Ratings
based on 223 reviews
Rating in categories
|
Engineer
92
salaries
|  ₹0 L/yr - ₹0 L/yr |
|
Senior Engineer
62
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Executive
34
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Deputy Manager
32
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Junior Engineer
31
salaries
| ₹0 L/yr - ₹0 L/yr |
Tata Steel
JSW Steel
Steel Authority Of India
Jindal Steel and Power
- Home >
- Interviews >
- Slr Metaliks Interview Questions
