Add office photos
Filter interviews by
Shapoorji Pallonji Group Senior Safety Engineer Interview Questions, Process, and Tips
Top Shapoorji Pallonji Group Senior Safety Engineer Interview Questions and Answers
- Q1. What is the thumb rule of load calculation for wire rope sling and D-shackles?
- Q2. What is EHS Plan and how you have prepare it?
- Q3. What is critical lifting? have you done it before?
Shapoorji Pallonji Group Senior Safety Engineer Interview Experiences
2 interviews found
I applied via Naukri.com and was interviewed in Oct 2021. There were 3 interview rounds.
Interview Questionnaire
11 Questions
- Q1. HR: Tell me about yourself?
- Ans.
I am an experienced Senior Safety Engineer with a strong background in ensuring workplace safety and implementing safety protocols.
Over 10 years of experience in the field of safety engineering
Expertise in conducting risk assessments and developing safety procedures
Proven track record of successfully implementing safety measures to prevent accidents and injuries
Strong knowledge of safety regulations and standards
Experi...
- Q2. In which project you are working now?
- Q3. What are the scope of the project?
- Ans.
The scope of the project is to ensure the safety of senior citizens by implementing measures to prevent accidents and provide assistance in emergency situations.
Implementing safety protocols and guidelines for senior living facilities
Conducting risk assessments and identifying potential hazards
Developing emergency response plans and procedures
Training staff and residents on safety measures and emergency protocols
Instal...
- Q4. What is EHS Plan and how you have prepare it?
- Ans.
An EHS plan is a document that outlines an organization's policies and procedures for ensuring the safety and health of employees and the environment.
EHS stands for Environment, Health, and Safety
The plan should identify potential hazards and risks, and provide measures to mitigate them
It should also include emergency response procedures and training programs
Examples of EHS plans include spill prevention plans, hazardo...
- Q5. Who is the client, Authority engineer and safety consultant in your project?
- Ans.
The client, authority engineer, and safety consultant are key stakeholders in the project.
The client is the individual or organization that initiates and funds the project.
The authority engineer is responsible for ensuring compliance with relevant regulations and standards.
The safety consultant provides expertise and guidance on safety measures and risk mitigation.
Examples: Client - a construction company, Authority en...
- Q6. What is critical lifting? have you done it before?
- Ans.
Critical lifting refers to the process of lifting heavy loads that require special attention and precautions to ensure safety.
It involves assessing the weight and dimensions of the load, as well as the lifting equipment and environment.
Proper planning, communication, and coordination are essential to minimize risks and prevent accidents.
Examples include lifting large machinery, construction materials, and heavy equipme...
- Q7. What is tandem lifting?
- Ans.
Tandem lifting is a technique of lifting heavy loads using two or more cranes working in unison.
It involves coordinating the movements of multiple cranes to lift a single load.
It is commonly used in construction and industrial settings.
Tandem lifting requires careful planning and communication between crane operators.
The load being lifted must be evenly distributed between the cranes to prevent accidents.
Examples of ta...
- Q8. What is the thumb rule of load calculation for wire rope sling and D-shackles?
- Ans.
The thumb rule for load calculation of wire rope sling and D-shackles is to not exceed the working load limit (WLL).
The WLL is usually marked on the sling or shackle.
The load should never exceed the WLL, even if the sling or shackle appears to be in good condition.
Factors such as angle of lift, number of legs, and type of hitch can affect the WLL.
Consult industry standards and guidelines for specific load calculations.
...
- Q9. What are the legal requirements in your current project?
- Ans.
Legal requirements in the current project include compliance with safety regulations and standards.
Compliance with local, state, and federal safety regulations
Adherence to industry-specific safety standards
Documentation and reporting of safety measures
Regular safety inspections and audits
Training and certification requirements for safety personnel
- Q10. Is there any accidents occurred at your workplace in past?
- Ans.
Yes, there have been accidents at my workplace in the past.
Accidents are unfortunate but can happen in any workplace.
It is important to learn from accidents and take measures to prevent them in the future.
Examples of accidents at my workplace include slips, trips, and falls, equipment malfunctions, and chemical spills.
We have implemented safety protocols and training programs to minimize the risk of accidents.
Regular s...
- Q11. Safety Head: What are your qualifications and achievement?
- Ans.
I have a strong background in safety engineering and have achieved significant results in improving safety measures.
Bachelor's degree in Safety Engineering
Certified Safety Professional (CSP)
10+ years of experience in safety engineering
Implemented safety protocols resulting in a 30% reduction in workplace accidents
Developed and conducted safety training programs for employees
Led a team in conducting thorough safety audi...
Interview Preparation Tips
Safety topics about workplace
Top trending discussions
Interview questions from similar companies
Senior Safety Engineer Interview Questions & Answers
Larsen & Toubro Limited
Anonymous
posted on 31 Jul 2024
General knowledge about yourself
(2 Questions)
- Q1. ISO policy management system
- Q2. Roles and responsibilities
Senior Safety Engineer Interview Questions & Answers
Tata Projects
Naveen Kumar Shah
posted on 16 Nov 2023
Selected
I applied via Walk-in and was interviewed in Oct 2023. There were 3 interview rounds.
(2 Questions)
- Q1. Ehs management..audit .14k..18k / 45001 etc..
- Q2. Report system / ptw system
(2 Questions)
- Q1. Cost management
- Q2. Salary discussed
Interview Preparation Tips
Selected
I applied via Campus Placement and was interviewed before Feb 2022. There were 4 interview rounds.
General and technical aptitude test
(2 Questions)
- Q1. Technical interview was done by Safety expert
- Q2. Standard safety practices during excavation, IS Codes related to scaffold erection and so on.
- Ans.
Standard safety practices during excavation and IS Codes related to scaffold erection are crucial for ensuring workplace safety.
Excavation safety practices include proper shoring, sloping, and benching techniques to prevent cave-ins and collapses.
IS Codes related to scaffold erection provide guidelines for the safe design, construction, and use of scaffolds.
Other important safety practices include proper use of persona...
(1 Question)
- Q1. Career goals, Introductions, Reasons to choose particular profession
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed in May 2023. There were 3 interview rounds.
(4 Questions)
- Q1. What is risk ,hazard and near miss?
- Ans.
Risk is the likelihood of a harmful event happening, hazard is a potential source of harm, and a near miss is a close call that could have resulted in harm.
Risk is the chance of a harmful event occurring, such as an accident or injury
Hazard is a potential source of harm, such as a slippery floor or faulty equipment
Near miss is a close call where an incident almost occurred but was avoided
Identifying and addressing risk...
- Q2. About BOCW Act. about critical lifting
- Q3. Type of fire extinguisher and it use
- Ans.
Different types of fire extinguishers include water, foam, CO2, dry powder, and wet chemical, each designed for specific types of fires.
Water extinguishers are suitable for Class A fires involving solid materials like wood or paper.
Foam extinguishers are effective on Class A and B fires, which involve flammable liquids like petrol or oil.
CO2 extinguishers are used for electrical fires (Class C) and flammable liquids (C...
- Q4. How many of fall arrestor
- Ans.
The number of fall arrestors required depends on the specific work environment and tasks being performed.
Number of fall arrestors needed is determined by the number of workers at height simultaneously
Consider the length of the fall arrestor lanyard and the distance to the nearest anchor point
Ensure that each worker has their own fall arrestor for individual protection
(1 Question)
- Q1. About payment and facility of next company
Selected
I applied via LinkedIn and was interviewed in May 2023. There were 5 interview rounds.
Technology development based on question
(1 Question)
- Q1. Ctc, and employees benefit, experience
(2 Questions)
- Q1. Group members discussed
- Q2. Technical questions
(2 Questions)
- Q1. Technical and over all experience, different types of work and skills cases
- Q2. Related experience
Interview Preparation Tips
Selected
I applied via Campus Placement and was interviewed before Dec 2023. There were 2 interview rounds.
It was in campus interview. aptitude test difficulty low
(2 Questions)
- Q1. Ferranti effect
- Q2. What is Skin effect?
Selected
I was interviewed in Jul 2022.
(2 Questions)
- Q1. I was interviewed for Transmission & Distribution Profile Q1 - Please walk us through your CV and your roles in the various projects ? Q2 - Tell us about design calculations of EHV Cables. How you come up ...
- Q2. Q15 - Concepts of HVDC & Offshore Connections
- Ans.
HVDC is a technology used to transmit high voltage DC power over long distances. Offshore connections refer to power transmission from offshore wind farms.
HVDC is more efficient than AC transmission over long distances
Offshore connections require specialized equipment and installation techniques
HVDC is used for offshore connections to transmit power from offshore wind farms to the mainland
Examples of HVDC projects incl...
Interview Preparation Tips
- Grounding
- Cable Sizing
- Battery Charger
- Transformers
- Power Transmission
Go through these topics
1. Grounding Design details
2. Battery Charger sizing step by step process
3. Cable Ampacity and SVL calculation.
Crane loading unloading welding fire extinguisher cut injury welding
(2 Questions)
- Q1. Crane load capacity crane loading unloading fire extinguisher welding grinding ppe
- Q2. Fire work at Hieght confined space near miss
- Ans.
The question is unclear and requires further clarification.
Can you please provide more context or details about the incident?
What was the cause of the near miss?
What safety measures were in place to prevent such incidents?
Were there any injuries or damages as a result of the near miss?
How can we improve safety procedures to prevent similar incidents in the future?
Interview Preparation Tips
Shapoorji Pallonji Group Interview FAQs
Some of the top questions asked at the Shapoorji Pallonji Group Senior Safety Engineer interview -
Tell us how to improve this page.
Shapoorji Pallonji Group Interviews By Designations
- Shapoorji Pallonji Group Graduate Engineer Trainee (Get) Interview Questions
- Shapoorji Pallonji Group Senior Engineer Interview Questions
- Shapoorji Pallonji Group Deputy Manager Interview Questions
- Shapoorji Pallonji Group Billing Engineer Interview Questions
- Shapoorji Pallonji Group Civil Engineer Interview Questions
- Shapoorji Pallonji Group Construction Engineer Interview Questions
- Shapoorji Pallonji Group Electrical Engineer Interview Questions
- Shapoorji Pallonji Group Senior Civil Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Safety Engineer Interview Questions
- Safety Manager Interview Questions
- Senior Safety Officer Interview Questions
- Safety Officer Interview Questions
- Fire & Safety Officer Interview Questions
- Safety Supervisor Interview Questions
- Fire & Safety Supervisor Interview Questions
- Senior Safety Supervisor Interview Questions
- Show more
Shapoorji Pallonji Group Senior Safety Engineer Interview Process
based on 2 interviews
Interview experience
Interview Questions from Similar Companies
Fast track your campus placements
Shapoorji Pallonji Group Senior Safety Engineer Reviews and Ratings
based on 3 reviews
Rating in categories
|
Deputy Manager
607
salaries
|  ₹6 L/yr - ₹16 L/yr |
|
Senior Engineer
427
salaries
| ₹4 L/yr - ₹12.2 L/yr |
|
Construction Engineer
304
salaries
| ₹2.4 L/yr - ₹9 L/yr |
|
Civil Site Engineer
227
salaries
| ₹1.5 L/yr - ₹9 L/yr |
|
Safety Officer
225
salaries
| ₹1.8 L/yr - ₹7.5 L/yr |
Tata Group
Reliance Industries
Adani Group
Larsen & Toubro Limited
- Home >
- Interviews >
- Shapoorji Pallonji Group Interview Questions >
- Shapoorji Pallonji Group Senior Safety Engineer Interview Questions
