Senior Safety Supervisor
20+ Senior Safety Supervisor Interview Questions and Answers
Q1. What are the stages of Bridge Construction?
Bridge construction involves several stages from planning to completion.
Planning and design
Site preparation and foundation work
Substructure construction
Superstructure construction
Finishing and maintenance
Examples of bridge types: suspension, cable-stayed, arch, beam, truss
Q2. What is HIRA? What is Work at Height and it's hazard and it's precautions?
HIRA stands for Hazard Identification and Risk Assessment. Work at Height refers to tasks performed at elevated locations, with hazards including falls, falling objects, and structural collapses.
HIRA involves identifying potential hazards in the workplace and assessing the risks associated with them.
Work at Height includes tasks such as working on roofs, scaffolding, ladders, or elevated platforms.
Hazards of Work at Height include falls, falling objects, and structural collap...read more
Q3. What is Fire and state it's classifications
Fire is a chemical reaction that releases heat and light. It has four classifications.
Fire is a rapid oxidation process that produces heat and light.
The four classifications of fire are Class A, Class B, Class C, and Class D.
Class A fires involve ordinary combustibles like wood, paper, and cloth.
Class B fires involve flammable liquids and gases like gasoline and propane.
Class C fires involve electrical equipment like appliances and wiring.
Class D fires involve combustible met...read more
Q4. At what decibel sound is classified as noise?
Noise is classified as any sound above 85 decibels.
Noise levels above 85 decibels can cause hearing damage.
Examples of noise levels: normal conversation - 60 decibels, heavy traffic - 85 decibels, rock concert - 110 decibels.
It is important to wear hearing protection in noisy environments.
Q5. What is work permit and it's types?
A work permit is a written authorization required to perform certain tasks or enter specific areas within a workplace.
Types of work permits include hot work permits, confined space entry permits, electrical work permits, etc.
Work permits outline the specific tasks to be performed, potential hazards, safety precautions, and duration of the permit.
They are typically issued by a supervisor or safety officer and must be obtained before starting work in a hazardous area.
Failure to...read more
Q6. What is the csm and how to conduct cfsa
CSM stands for Control of Substances Hazardous to Health. CFSA is conducted by identifying hazards, assessing risks, and implementing control measures.
CSM is a set of regulations that aim to protect workers from hazardous substances in the workplace.
CFSA stands for Chemical Facility Safety Assessment and is conducted to identify potential hazards and risks in chemical facilities.
The process of conducting CFSA involves identifying hazardous substances, assessing the risks asso...read more
Share interview questions and help millions of jobseekers 🌟
Q7. What is SP02? explain in brief
SP02 is a measure of oxygen saturation in the blood.
SP02 is a non-invasive way to measure the amount of oxygen in the blood.
It is measured as a percentage and is typically done using a pulse oximeter.
A normal SP02 reading is between 95-100%, while anything below 90% is considered low and may require medical attention.
SP02 levels can be affected by various factors such as altitude, lung diseases, and heart conditions.
Q8. Device name of crane.sacaffolding components name.critical lifting
The device name of a crane is typically based on the manufacturer or model, scaffolding components include planks, frames, and braces, and critical lifting refers to high-risk lifting operations.
Crane device names can include brands like Liebherr or models like Crawler Crane.
Scaffolding components include planks, frames, braces, and platforms.
Critical lifting refers to high-risk operations like lifting heavy loads over people or sensitive equipment.
Q9. What is hira ,,jsa ,, definition
HIRA and JSA are safety management systems used to identify and mitigate workplace hazards.
HIRA stands for Hazard Identification and Risk Assessment
JSA stands for Job Safety Analysis
HIRA is a proactive approach to identify potential hazards and assess the risks associated with them
JSA is a step-by-step process to identify potential hazards and develop controls to mitigate them
Both HIRA and JSA are important tools for ensuring workplace safety
Q10. How many type of fire extinguisher
There are five main types of fire extinguishers: water, foam, powder, CO2, and wet chemical.
Water fire extinguishers are suitable for Class A fires involving solid materials like wood or paper.
Foam fire extinguishers are effective for Class A and B fires, which involve flammable liquids like petrol or oil.
Powder fire extinguishers can be used on Class A, B, C, and electrical fires. They are versatile but can cause a lot of mess.
CO2 fire extinguishers are suitable for electric...read more
Q11. What is ppe and electrical hazarad
PPE stands for Personal Protective Equipment and electrical hazards refer to potential dangers associated with electricity.
PPE includes items like gloves, helmets, goggles, and safety shoes to protect workers from physical harm.
Electrical hazards can include shocks, burns, and fires caused by contact with live wires or faulty equipment.
Proper training on PPE usage and electrical safety protocols is essential to prevent accidents in the workplace.
Q12. What is the hazard?
The hazard is a potential source of harm or danger that could cause injury or damage.
Identify the specific hazard and its characteristics.
Assess the potential risks associated with the hazard.
Implement appropriate safety measures to mitigate or eliminate the hazard.
Regularly monitor and review the effectiveness of the safety measures.
Provide training and education to employees on recognizing and dealing with the hazard.
Examples: Slippery floors, exposed electrical wires, toxi...read more
Q13. What will do at site on a day
As a Senior Safety Supervisor, I will oversee safety protocols, conduct safety audits, train employees, and ensure compliance with regulations.
Conduct safety audits to identify potential hazards
Train employees on safety procedures and protocols
Ensure compliance with safety regulations and standards
Oversee safety protocols and procedures on site
Investigate and report any safety incidents or accidents
Q14. Hot work hazard and it's precautions
Hot work hazard refers to the risks associated with tasks involving open flames, sparks, or high temperatures. Precautions include proper training, fire prevention measures, and personal protective equipment.
Ensure proper training for all workers involved in hot work tasks
Implement fire prevention measures such as removing flammable materials from the work area
Provide and ensure the use of appropriate personal protective equipment such as fire-resistant clothing and gloves
Hav...read more
Q15. How to conducting mockdrill
Mock drills are conducted to test the preparedness of the team in case of an emergency.
Identify the type of emergency to be simulated
Inform all team members about the drill in advance
Assign roles and responsibilities to each team member
Conduct the drill as realistically as possible
Evaluate the team's performance and provide feedback
Make necessary changes to the emergency plan based on the drill results
Q16. What is Risk Assessment?
Risk assessment is the process of identifying, analyzing, and evaluating potential risks to determine the likelihood and impact of those risks.
It involves identifying hazards and potential risks
Analyzing the likelihood and severity of those risks
Evaluating the risk and determining appropriate measures to control or mitigate it
Examples include workplace safety assessments, environmental impact assessments, and security risk assessments
Q17. How observed unsafe conditions
I regularly conduct safety inspections and audits to identify any unsafe conditions.
I observe the work environment and equipment for any potential hazards
I review incident reports and investigate any near-misses
I encourage employees to report any unsafe conditions they observe
I work with management to implement corrective actions to address identified unsafe conditions
I stay up-to-date with industry safety standards and regulations
Q18. What is a work permit?
A work permit is a document issued by a competent authority that authorizes a person to perform a specific job or task in a controlled environment.
A work permit outlines the specific job or task that the individual is authorized to perform.
It includes details such as the location where the work will be carried out, the duration of the permit, and any safety precautions that need to be followed.
Work permits are often used in industries such as construction, manufacturing, and ...read more
Q19. Explain Pilling in detail.
Pilling is the formation of small balls of fibers on the surface of a fabric.
Pilling occurs due to friction and abrasion on the fabric surface.
It is more common in synthetic fabrics than natural ones.
Pilling can be prevented by using fabric softeners, washing clothes inside out, and avoiding high heat in the dryer.
Pilling can be removed using a fabric shaver or a lint roller.
Pilling is not a sign of poor quality fabric, but rather a natural occurrence.
Q20. What is hot work permit
A hot work permit is a document that authorizes personnel to perform hot work activities in a specific location.
Hot work permits are typically required in industrial settings where there is a risk of fire or explosion.
The permit outlines the precautions that must be taken before, during, and after the hot work is performed.
Examples of hot work activities include welding, cutting, grinding, and soldering.
The permit may include details such as the type of hot work, location, du...read more
Q21. What is scaffolding with types
Scaffolding is a temporary structure used to support workers and materials during construction or maintenance work.
Scaffolding can be classified into various types such as supported scaffolding, suspended scaffolding, and mobile scaffolding.
Supported scaffolding is the most common type and is supported by load-bearing walls, columns, or frames.
Suspended scaffolding is hung from the roof or a tall structure and is commonly used for window washing or painting.
Mobile scaffolding...read more
Q22. What is JSA?
JSA stands for Job Safety Analysis. It is a process of identifying potential hazards and risks associated with a particular job or task.
JSA involves breaking down a job into individual steps and analyzing each step for potential hazards.
It helps in identifying the necessary safety measures and precautions to be taken to prevent accidents and injuries.
JSA is commonly used in industries such as construction, manufacturing, and healthcare.
Example: A JSA for a construction worker...read more
Q23. Type of lifting component .
The type of lifting component refers to the equipment or machinery used for lifting heavy objects.
Common types include cranes, forklifts, hoists, and pallet jacks
Each type has specific safety protocols and training requirements
Inspecting and maintaining lifting components is crucial for safety
Q24. What hight fall
The height at which a fall becomes dangerous depends on various factors such as surface type, landing position, and individual health.
The height at which a fall can cause serious injury is typically considered to be around 10 feet or higher.
Falls from lower heights can still result in injuries depending on the surface and landing position.
Factors such as age, health condition, and protective gear worn can also impact the severity of injuries from a fall.
Q25. What is HIRA
HIRA stands for Hazard Identification and Risk Assessment.
HIRA is a systematic process used to identify potential hazards in the workplace.
It involves assessing the risks associated with these hazards and implementing controls to mitigate them.
Examples of hazards that may be identified in a HIRA include chemical exposure, fall hazards, and electrical hazards.
Interview Questions of Similar Designations
Interview experiences of popular companies
Calculate your in-hand salary
Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Reviews
Interviews
Salaries
Users/Month