Upload Button Icon Add office photos

Filter interviews by

Rexnord Interview Questions, Process, and Tips

Updated 26 Nov 2023

Top Rexnord Interview Questions and Answers

View all 7 questions

Rexnord Interview Experiences

Popular Designations

7 interviews found

SAP SD ORDER MANAGEMENT SPECIALIST Interview Questions & Answers

user image Anonymous

posted on 24 Aug 2020

I applied via Naukri.com and was interviewed in Feb 2020. There were 4 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. 1.Tell about your ongoing project?
  • Q2. 2. What are the T- codes you used in SAP?
  • Q3. What is the process you follows in Credit or invoice issue?
  • Q4. Do you allocate the new volume in SFDC?

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep Naukri profile updated. Always be attentive and confident in attending interview. Try to grab the opportunity instead of waiting for the specific opportunity.

Skills evaluated in this interview

Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Tell me about yourself
  • Q2. Tell me about your previous company

Interview Preparation Tips

Interview preparation tips for other job seekers - Speak truth confidently. Don't fake anything.Best of luck guys.

Export Executive Interview Questions asked at other Companies

Q1. How to mange goods if you have not invoice but you need send goods to cha warehouse for export perpose.
View answer (1)
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
No response

I applied via Referral and was interviewed before Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. GD & T technical coupling types manufacturing process
  • Q2. Coupling bearing chain gearbox types of coupling
  • Ans. 

    Coupling is used to connect two shafts together, bearing supports the shaft, chain transmits power, and gearbox changes speed/torque.

    • Coupling connects two shafts to transmit power without misalignment

    • Bearing supports the shaft and reduces friction

    • Chain is used to transmit power between two shafts

    • Gearbox changes the speed and torque of the rotating shafts

  • Answered by AI
Round 3 - HR 

(2 Questions)

  • Q1. Tell me about your self
  • Q2. Strength and weakness

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare technical questions for coupling.refer catalogue of this company.

Senior Engineer Interview Questions asked at other Companies

Q1. what is the meaning of M in M20,M25,M30 grade of concrete?
View answer (54)

Engineer Interview Questions & Answers

user image Jitesh Kumar

posted on 26 Nov 2023

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via campus placement at National Institute of Technology (NIT), Warangal and was interviewed before Nov 2022. There were 3 interview rounds.

Round 1 - Aptitude Test 

It was a mix of Engineering and General Ability

Round 2 - Technical 

(1 Question)

  • Q1. Questions were on basic Engineering fundamentals like thermodynamics.
Round 3 - HR 

(1 Question)

  • Q1. Typical HR questions

Engineer Interview Questions asked at other Companies

Q1. ❖ If a team member is unable to carry out his work, he is doing it repetitively, how would you handle it?, would you like to work only on lifing of components, or would you be ready to shift to other departments?
View answer (5)

Rexnord interview questions for popular designations

 Design Engineer

 (1)

 Engineer

 (1)

 Export Executive

 (1)

 Maintenance Engineer

 (1)

 Sales Coordinator

 (1)

 Senior Engineer

 (1)

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before May 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. About your expectations
  • Q2. Your experience
  • Ans. 

    I have 5 years of experience as a Maintenance Engineer.

    • Managed and supervised maintenance activities for a manufacturing plant

    • Developed and implemented preventive maintenance schedules

    • Troubleshooted and repaired mechanical and electrical equipment

    • Collaborated with cross-functional teams to optimize equipment performance

    • Implemented cost-saving measures through efficient maintenance practices

  • Answered by AI
Round 3 - Technical 

(3 Questions)

  • Q1. How would you find the machine problems
  • Ans. 

    I would use a combination of visual inspection, data analysis, and testing to identify machine problems.

    • Conduct regular visual inspections of the machine to identify any visible signs of wear and tear or damage.

    • Analyze data from the machine's sensors and logs to identify any anomalies or patterns that may indicate a problem.

    • Perform testing on the machine to identify any issues with its performance or functionality.

    • Cons...

  • Answered by AI
  • Q2. How will you fix it
  • Ans. 

    I will fix it by identifying the root cause and implementing appropriate solutions.

    • Conduct a thorough inspection to identify the problem

    • Analyze the data and determine the root cause

    • Develop a plan to fix the issue

    • Implement the plan and test the equipment to ensure it is working properly

    • Monitor the equipment to ensure the problem does not reoccur

  • Answered by AI
  • Q3. What the plan of action to proceed towards the issue.
  • Ans. 

    The plan of action would involve identifying the issue, assessing its severity, determining the root cause, and implementing a solution.

    • Identify the issue through observation and analysis

    • Assess the severity of the issue to determine the urgency of the solution

    • Determine the root cause of the issue to prevent it from recurring

    • Implement a solution that addresses the root cause and resolves the issue

    • Monitor the solution to...

  • Answered by AI

Maintenance Engineer Interview Questions asked at other Companies

Q1. 1)which refrigeration cycle used in chilling plant?
View answer (9)

I applied via Indeed and was interviewed before Oct 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Past work experience in coordination or sales

Interview Preparation Tips

Interview preparation tips for other job seekers - if you have work as a coordinator for any product, you can work here, bcoz everything is checked and approved by mgmt before sending to customer. you can not use your skills whether you are experienced or not.

Sales Coordinator Interview Questions asked at other Companies

Q1. How can you convince a client to take the product from you?
View answer (1)

I applied via Job Portal and was interviewed before May 2020. There were 5 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. This interview was 100% technical and last for 2 hrs/each round. Total 2 rounds, second round was CAD test but in that also some questions were asked. Most of the questions were on “Basics of Mechanical En...
  • Q2. CAD test will be there for sure. I was asked to create basic representation of gate valve using Autodesk Inventor. Also was asked to explain some of the features like extrude, revolve etc.

Interview Preparation Tips

Interview preparation tips for other job seekers - Just stick to basics, if u have answers then go in detail as much as u can, else try to explain something (apart from topic) what u know so that next questions will be on that topics.

Design Engineer Interview Questions asked at other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel engine and Diesel in petrol engone.
View answer (5)

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Dec 2024.

Round 1 - Aptitude Test 

Technical aptitude related to wiring, symbol identify, software related

Round 2 - Technical 

(1 Question)

  • Q1. EPLAN software macros type, Report generation, Black up, restore process, black box, structure box, Q2: Heat load calculation Q3: RFQ Full form process Q4: Switchgear selection Q5: MCB type, working.
Round 3 - One-on-one 

(2 Questions)

  • Q1. EPLAN software Version, AutoCAD software
  • Q2. Work pressure handling capacity

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well, stay positive about everything, be honest
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I was interviewed in Nov 2024.

Round 1 - Technical 

(4 Questions)

  • Q1. Wind calculation as per IS code
  • Ans. 

    The procedure for wind calculation as per IS code involves determining the design wind speed, selecting the appropriate terrain category, and calculating the wind pressure.

    • Determine the design wind speed based on the location and height of the structure.

    • Select the appropriate terrain category (rural, urban, etc.) as per IS code guidelines.

    • Calculate the wind pressure using the formula provided in the IS code.

    • Consider fa...

  • Answered by AI
  • Q2. SFD and BMD of cantilever beam
  • Q3. Staad model for fixed pole
  • Ans. 

    A STAAD model for a fixed pole is a structural analysis and design model used to determine the stability and strength of a pole that is fixed in place.

    • In a STAAD model for a fixed pole, the pole is typically modeled as a vertical member with fixed supports at the base.

    • The model considers factors such as wind loads, dead loads, and any other relevant loads that may act on the pole.

    • The analysis helps in determining the s...

  • Answered by AI
  • Q4. Design of Square base plate
  • Ans. 

    Key considerations in designing a square base plate

    • Ensure the base plate is large enough to support the load without excessive deflection

    • Select appropriate material and thickness to meet structural requirements

    • Consider the connection details for attaching the base plate to the structure

    • Account for any potential corrosion or environmental factors that may affect the base plate

    • Include provisions for anchor bolts or other...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare wind calculation & Steel design
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Engineer 

(5 Questions)

  • Q1. What is your name
  • Ans. 

    My name is John Smith.

    • Full name is John Smith

    • Common name in English-speaking countries

    • Easy to remember and pronounce

  • Answered by AI
  • Q2. How much experience you have
  • Ans. 

    I have 2 years of experience working as a Junior Assistant in a busy office environment.

    • 2 years of experience as a Junior Assistant

    • Proficient in office administration tasks

    • Skilled in using Microsoft Office suite

    • Excellent communication and organizational skills

  • Answered by AI
  • Q3. Which type of project you done
  • Ans. 

    I have worked on various types of projects including data analysis, event planning, and marketing campaigns.

    • Data analysis project for a retail company to identify customer trends

    • Event planning project for a charity fundraiser event

    • Marketing campaign project for a new product launch

  • Answered by AI
  • Q4. Which type of machine you operate our know
  • Ans. 

    I have experience operating various types of office equipment such as printers, scanners, and copiers.

    • Printers

    • Scanners

    • Copiers

  • Answered by AI
  • Q5. How to plan for production tomorrow
  • Ans. 

    To plan for production tomorrow, it is important to assess current inventory, review upcoming orders, allocate resources, and communicate with team members.

    • Assess current inventory levels to determine what needs to be produced

    • Review upcoming orders to prioritize production schedule

    • Allocate resources such as materials, equipment, and manpower accordingly

    • Communicate with team members to ensure everyone is aware of their

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. What is the least count of micrometer and caliper
  • Ans. 

    The least count of a micrometer is 0.01 mm and the least count of a caliper is 0.02 mm.

    • Micrometer least count: 0.01 mm

    • Caliper least count: 0.02 mm

  • Answered by AI
  • Q2. What is conncetricity,total runout, flatness,rf and rt
  • Ans. 

    Concentricity, total runout, flatness, rf, and rt are important measurements in engineering and manufacturing.

    • Concentricity refers to the tolerance of the center point of a feature relative to its axis.

    • Total runout measures the maximum amount a feature may vary from true circularity when rotated.

    • Flatness is the deviation of a surface from a perfect plane.

    • Rf (roughness factor) and Rt (roughness total) are measurements o...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Work in your native ,help to you take care of your perents

Rexnord Interview FAQs

How many rounds are there in Rexnord interview?
Rexnord interview process usually has 3 rounds. The most common rounds in the Rexnord interview process are Resume Shortlist, HR and Technical.
How to prepare for Rexnord interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Rexnord. The most common topics and skills that interviewers at Rexnord expect are Recruitment, Sales Development, Business Development, institutional sales and Institutional Business Development.
What are the top questions asked in Rexnord interview?

Some of the top questions asked at the Rexnord interview -

  1. What is the process you follows in Credit or invoice iss...read more
  2. What the plan of action to proceed towards the iss...read more
  3. 2. What are the T- codes you used in S...read more

Tell us how to improve this page.

Rexnord Interview Process

based on 4 interviews

Interview experience

3.3
  
Average
View more

Interview Questions from Similar Companies

Siemens Interview Questions
4.1
 • 416 Interviews
Thermax Limited Interview Questions
4.1
 • 250 Interviews
ABB Interview Questions
4.1
 • 232 Interviews
SKF Interview Questions
4.0
 • 64 Interviews
Bharat Forge Interview Questions
3.9
 • 55 Interviews
Timken Interview Questions
3.9
 • 46 Interviews
View all

Rexnord Reviews and Ratings

based on 29 reviews

3.3/5

Rating in categories

2.9

Skill development

3.1

Work-life balance

3.0

Salary

2.7

Job security

2.7

Company culture

2.8

Promotions

2.6

Work satisfaction

Explore 29 Reviews and Ratings
Engineer
30 salaries
unlock blur

₹1.4 L/yr - ₹7 L/yr

Design Engineer
18 salaries
unlock blur

₹4.1 L/yr - ₹7.3 L/yr

Senior Engineer
11 salaries
unlock blur

₹5.9 L/yr - ₹9 L/yr

Mechanical Engg. Design
9 salaries
unlock blur

₹3.6 L/yr - ₹6.5 L/yr

Production Supervisor
7 salaries
unlock blur

₹1.8 L/yr - ₹3.6 L/yr

Explore more salaries
Compare Rexnord with

Timken

3.9
Compare

Schaeffler India

4.2
Compare

SKF

4.0
Compare

Bharat Forge

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview