Upload Button Icon Add office photos

Filter interviews by

Valmont Structures Design Engineer Interview Questions, Process, and Tips

Updated 12 Dec 2024

Top Valmont Structures Design Engineer Interview Questions and Answers

Valmont Structures Design Engineer Interview Experiences

3 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I was interviewed in Nov 2024.

Round 1 - Technical 

(4 Questions)

  • Q1. Wind calculation as per IS code
  • Ans. 

    The procedure for wind calculation as per IS code involves determining the design wind speed, selecting the appropriate terrain category, and calculating the wind pressure.

    • Determine the design wind speed based on the location and height of the structure.

    • Select the appropriate terrain category (rural, urban, etc.) as per IS code guidelines.

    • Calculate the wind pressure using the formula provided in the IS code.

    • Consider fa...

  • Answered by AI
  • Q2. SFD and BMD of cantilever beam
  • Q3. Staad model for fixed pole
  • Ans. 

    A STAAD model for a fixed pole is a structural analysis and design model used to determine the stability and strength of a pole that is fixed in place.

    • In a STAAD model for a fixed pole, the pole is typically modeled as a vertical member with fixed supports at the base.

    • The model considers factors such as wind loads, dead loads, and any other relevant loads that may act on the pole.

    • The analysis helps in determining the s...

  • Answered by AI
  • Q4. Design of Square base plate
  • Ans. 

    Key considerations in designing a square base plate

    • Ensure the base plate is large enough to support the load without excessive deflection

    • Select appropriate material and thickness to meet structural requirements

    • Consider the connection details for attaching the base plate to the structure

    • Account for any potential corrosion or environmental factors that may affect the base plate

    • Include provisions for anchor bolts or other...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare wind calculation & Steel design
Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected
Round 1 - Technical 

(2 Questions)

  • Q1. Stress Strain curve
  • Q2. IS codes related to steel structures

Design Engineer Interview Questions Asked at Other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel ... read more
Q2. what is the difference between lathe and milling machine?
Q3. What is design considerations to mske while designing a Part?
Q4. Which are the operations performed on sheet metal to increase the ... read more
Q5. WHAT IS GD&T IN MECHANICAL? DESCRIBLE ALL IN DETAILS .
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Feb 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Aptitude test is conducted by organization to know the problem solving ability of candidate.

Round 2 - Technical 

(1 Question)

  • Q1. What are the different types of connections in steel structures.
  • Ans. 

    Different types of connections in steel structures include welded connections, bolted connections, and riveted connections.

    • Welded connections involve joining steel members by welding them together.

    • Bolted connections use bolts and nuts to connect steel members.

    • Riveted connections use rivets to connect steel members.

    • Other types of connections include pinned connections and moment-resisting connections.

    • Examples: Welded be...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Skills matters more than experience.

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Apr 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. SFD & BMD diagram, steel structures

Interview Preparation Tips

Topics to prepare for Pennar Industries Design Engineer interview:
  • Steel Structures
  • Code book
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Mar 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

General Aptitude test of 50 questions, need to clear in 1 hour

Round 3 - Technical 

(1 Question)

  • Q1. Technical question in academics, questions on final project, Pump & fluid related questions
Round 4 - HR 

(1 Question)

  • Q1. Regular HR questions

Interview Preparation Tips

Topics to prepare for Kirloskar Brothers Design Engineer interview:
  • Fluid Mechanics
  • Heat Transfer
  • Centrifugal Pumps
  • Materials
Interview preparation tips for other job seekers - Please go with technical. Keep updating yourself. All the best!

Interview Questionnaire 

2 Questions

  • Q1. They asked me mostly about my thesis. And why am i interested in Geotechnical Engg
  • Q2. Starting from modulus of elasticity of soil to liquifaction of soil. It went on like a discussion process
  • Ans. 

    Discussion on soil mechanics starting from modulus of elasticity to liquifaction

    • Modulus of elasticity is a measure of soil stiffness

    • Soil strength is important in determining its ability to withstand loads

    • Liquifaction occurs when soil loses strength and behaves like a liquid

    • Factors affecting soil strength include soil type, moisture content, and stress history

    • Liquifaction can lead to soil failure and damage to structure

  • Answered by AI

Interview Preparation Tips

Round: Interview
Experience: This round went pretty much well and i answered them fairly and easily.

Round: Interview
Experience: This was the round where i felt bit nervous but as i was known well my my subjects i answered them all perfectly.
Tips: Brush up your skills regularly.

General Tips: Have a good sense of your clothing,have confidence on what you speak.
Skills: Technical skills , General Knowledge
College Name: IIT ROORKEE
Motivation: i am a self motivator

I was interviewed before Sep 2016.

Interview Questionnaire 

1 Question

  • Q1. Ocampo, basic electronics and C

Interview Preparation Tips

Round: Test
Duration: 1 hour
Total Questions: 50

Skills: Embedded Systems, C Programming
College Name: Sahyadri college of engineering

I applied via PLACEMENT

Interview Preparation Tips

Round: Technical Interview
Experience: Good detailed interview in terms of technical knowledge
Tips: Should be thorough with the projects you have done during the course

General Tips: be confident of what you put in your resume
Technical knowledge regarding projects undertaken during engineering should be sound
Be confident
Skills: Communication, Thinking capability, knowledge applying capability
College Name: V.E.S Institute Of Technology
Motivation: Opportunity to work in a renowned and core technical company
Funny Moments: We consider the interview panelists to be as tough as our viva externals. Interviewers are mostly on your side(contrary to viva professors :P)

Interview Questionnaire 

5 Questions

  • Q1. Pertaining to the mentioned roles and responsibilities in your resume
  • Q2. Planning and work order creation
  • Q3. Piling activities
  • Q4. Introduction
  • Q5. Cross checking of documents

Interview Preparation Tips

Round: Resume Shortlist
Experience: On the criteria that I scored atleast 60% overall and had no gap between job/s.

Interview Questionnaire 

1 Question

  • Q1. Normal question about personality and job related

Interview Preparation Tips

Round: Test
Experience: Interview was going smoothly & all questions was related my job so it's was easy for me.
Tips: Good knowledge about of wind turbine
Duration: 2 hours
Total Questions: 25

Round: HR Interview
Experience: Interview was completed so easy
Tips: Required nice personality and confidence is must required

Valmont Structures Interview FAQs

How many rounds are there in Valmont Structures Design Engineer interview?
Valmont Structures interview process usually has 1-2 rounds. The most common rounds in the Valmont Structures interview process are Technical and Aptitude Test.
How to prepare for Valmont Structures Design Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Valmont Structures. The most common topics and skills that interviewers at Valmont Structures expect are 3D Modeling, AutoCAD, Autodesk Inventor, Solid Works and Staad Pro.
What are the top questions asked in Valmont Structures Design Engineer interview?

Some of the top questions asked at the Valmont Structures Design Engineer interview -

  1. What are the different types of connections in steel structur...read more
  2. Wind calculation as per IS c...read more
  3. Staad model for fixed p...read more

Tell us how to improve this page.

Valmont Structures Design Engineer Interview Process

based on 3 interviews

Interview experience

4
  
Good
View more
Valmont Structures Design Engineer Salary
based on 22 salaries
₹4 L/yr - ₹8.4 L/yr
18% more than the average Design Engineer Salary in India
View more details

Valmont Structures Design Engineer Reviews and Ratings

based on 3 reviews

4.4/5

Rating in categories

3.9

Skill development

4.0

Work-life balance

3.8

Salary

3.1

Job security

3.9

Company culture

3.5

Promotions

3.4

Work satisfaction

Explore 3 Reviews and Ratings
Senior Engineer
30 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Detailing Engineer
28 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Design Engineer
22 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
19 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
13 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Valmont Structures with

Pennar Industries

3.6
Compare

Jindal Steel and Power

3.9
Compare

Tata Steel

4.1
Compare

BHEL

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview