Reliance Industries Technical Engineer Interview Questions and Answers

RS 485 is a multi-point communication standard while RS 232 is a point-to-point communication standard.

• RS 485 supports up to 32 devices on a single bus while RS 232 only supports two devices.

• RS 485 uses differential signaling for noise immunity while RS 232 uses single-ended signaling.

• RS 485 can transmit data over longer distances than RS 232.

• RS 485 is commonly used in industrial automation and control systems while RS

Protocol is a set of rules and guidelines that govern the communication between devices or systems.

• Protocols ensure that devices or systems can communicate with each other effectively and efficiently.

• They define the format, timing, sequencing, and error checking of messages exchanged between devices or systems.

• Examples of protocols include TCP/IP, HTTP, FTP, and SMTP.

• Protocols can be implemented in hardware, software, ...read more

PLC stands for Programmable Logic Controller. It is a digital computer used for automation of electromechanical processes.

• PLC is used in industrial automation to control machinery and processes.

• It is programmed using ladder logic or other programming languages.

• PLC can be used in various applications such as manufacturing, transportation, and energy.

• Examples of PLC brands include Siemens, Allen-Bradley, and Mitsubishi.

• P...read more

There are several types of PLCs, including modular, compact, rack-mounted, and software-based PLCs.

• Modular PLCs are designed to be expandable and customizable.

• Compact PLCs are smaller and more cost-effective than modular PLCs.

• Rack-mounted PLCs are designed to be mounted in a standard equipment rack.

• Software-based PLCs run on a computer and use specialized software to emulate a physical PLC.

• Other types of PLCs include s...read more

I have handled various equipments including computers, servers, routers, switches, and printers.

• Computers

• Servers

• Routers

• Switches

• Printers

Shaft alignment in hydel power projects is carried out using laser alignment tools and techniques.

• Laser alignment tools are used to measure and correct shaft misalignment.

• The process involves measuring the offset and angular misalignment of the shafts.

• The readings are then used to adjust the position of the shafts until they are aligned within the required tolerances.

• Alignment is critical for efficient and safe operati...read more

There are various types of compressors used in power plants such as centrifugal, reciprocating, screw, and axial flow compressors.

• Centrifugal compressors are commonly used in power plants for air compression.

• Reciprocating compressors are used for high-pressure applications.

• Screw compressors are used for low-pressure applications.

• Axial flow compressors are used for large volumes of air at low pressure.

• Other types of com...read more