Motilal Nehru Institute National Institute of Technology (NIT), Allahabad

Allahabad, Uttar Pradesh

Your seniors at Motilal Nehru Institute National Institute of Technology (NIT), Allahabad helped you with their notes. Now they're helping you with their placement interview questions. 🙏

filter iconFilter interviews by

Company (1)

Designation

Clear all

Motilal Nehru Institute National Institute of Technology (NIT), Allahabad Placement Interview Questions

Updated 15 Nov 2024

5 interviews found

I was interviewed in Nov 2016.

5 Interview Rounds

Interview Preparation Tips

Round: Test
Experience: Test was conducted by Aspiring Minds(AMCAT). In Aptitude section (30 questions) the level of difficulty was decent and the questions tested both speed and aptitude application.
In Technical section (50 questions) the questions tested basic concepts with focus on Metallurgy, Heat Treatment and Machine Design.
Tips: In my experience question were easy straight forward and theoretical. So time is important. do not stick to one particular question.
Duration: 1 hour
Total Questions: 80

Round: Technical Interview
Experience: It was a very good experience. all the questions was asked to check your knowledge and on spot thinking.
Tips: Do not be nervous even if you don't know a answer. take your time, listen carefully and try to relate to things you know. whatever you write in resume you should be ready to tell the usefulness of that.
do not try to manipulate interviewer.

Round: HR Interview
Experience: Very basic and almost nominal.
Tips: If you have any future plans (CAT, MS, etc.), keep them to yourself. Never ever be location or department specific and always
remain flexible.

Skills: Technical Skill, Creative Thinking, Learning Ability
College Name: NIT ALLAHABAD
share interview

I was interviewed in Nov 2016.

5 Interview Rounds

Interview Preparation Tips

Round: Test
Experience: 30 questions in 30 minutes for aptitude section and 50 questions in 30 minutes for technical section.sectional cutoff was there. questions were easy; especially in technical section no calculation was required. questions were mostly from machine design, heat and mass transfer, metallurgy and few questions from other subjects like SOM, KOM, thermodynamics, industrial(basic). Aptitude section was comprised of quantitative(time and distance, mixtures, etc), verbal reasoning(antonyms, synonyms, etc), logical reasoning(pattern identification, odd one out, etc.).

Tips: Practice from indiabix as many questions were directly from there. mechanical handbook for GATE will also be useful.
Duration: 1 hour
Total Questions: 80

Round: Technical Interview
Experience: first he asked me about my family background and then came directly to my projects. i have not done any internships but i did four projects during my academics, all of them were on automobiles. he asked my role in the projects, what i did, how i did, problems i faced during my projects etc. then he came to my AOI, and asked me some questions which i have mentioned above. all they wanted to know was that whether i know what i have mentioned in the resume(projects, AOI).
Tips: keep good knowledge of your projects and your AOI(area of interest). if you have done co-curricular activities(like participation in SAE events, projects etc.) it will be a plus point.

Round: HR Interview
Experience: in this round they wanted to check whether i am really interested in the job or not. i had told him earlier that i want to work in RnD job profile. so he told me that i would be doing job in maintainance department then why do you want to join our company, here i justified my point(may be that's why i got selected).
Tips: be honest and confident

College Name: NIT ALLAHABAD
share interview

I was interviewed in Nov 2016.

5 Interview Rounds

Interview Preparation Tips

Round: Test
Experience: The level of Aptitude test was normal.It is upto Arun Sharma 2nd level.In this questions were asked from the topics time and work,time and distance,average,compound interst majorly.The technical questions were mostly from material science ,Strength of material , manufacturing and these were asked from technical questions of India Bix.So for Aptitude ,lofoya.com and pariksha.co is best and for technical ,india bix is sufficient for written test.
Tips: Prefer to solve aptitude questions in online mode.Give weekly test of pariksha.co . Don't do aptitude questions from India bix. It is only for technical.
Duration: 1 hour 30 minutes
Total Questions: 90

Round: Technical + HR Interview
Experience: Hii guys,I am a mechanical student in NIT Allahabad. When i entered in interview room ,interviewer asked first question to tell me about my self ? I answer about my previous studies,about my parents and share the experience when i entered in college in 1st year.Then from there i come to my Project which i have done in college in 1st ,2nd and 3rd year.then he asked some questions from my project. After that he asked me from my AOI. It was SOM and I.C.Engine .He asked questions from SOM .He asked me about Stress-strain and fatigue diagram. then about designing of crankshaft and nut bolts. After that i said to him that sir ,i have one more project. As project is your strong Point where ypu can show your skill upto 100%. So i explain my summer training project and final year project. Then he asked me you have a lot of projects in Automobile sector .How these projects will helpful for reliance ? Before this i was rejected from some interview as i was not prepare for this question.but this time i cracked it .i Explained to him that all my projects are inclined towards reliance industries by giving him proper arguments. This time he was satisfied and then he asked me if you were appointed in maintenance and u have to motivate your subordinates ,how will u motivate them? I answered it perfectly by applying the concept of industrial engineering. Then last question is ,Do u want to ask any question? I visited reliance website and i was prepare for that question so i asked about ongoing project of reliance industries. This was all about 50 minutes.
Tips: Prepare your projects very carefully and mold interview in your side. AOI should be prepared very well. Be confident.

Round: HR Interview
Experience: HR interview of Reliance was light. Its only a formality. 90% chance of selection ,when u forwarded from technical round.He said to me that your communication is not good so improve it and all you have written about your strength and weakness, you must have one supporting factor of it.
Tips: Prepare about basic thing that are asked in HR like Strength and weakness, how u are fit for this job and what you have done to improve your weak skills . It was a good experience . I liked it very much.

Skills: Technical Analysis, Leadership Skills, Project And Training
College Name: NIT Allahabad
share interview

I was interviewed before Jan 2016.

3 Interview Rounds

Interview Preparation Tips

Round: Test
Experience: 30 questions in 30 minutes for aptitude section and 50 questions in 30 minutes for technical section.sectional cutoff was there. questions were easy; especially in technical section no calculation was required. questions were mostly from machine design, heat and mass transfer, metallurgy and few questions from other subjects like SOM, KOM, thermodynamics, industrial(basic). Aptitude section was comprised of quantitative(time and distance, mixtures, etc), verbal reasoning(antonyms, synonyms, etc), logical reasoning(pattern identification, odd one out, etc.).
Tips: Practice from indiabix as many questions were directly from there. mechanical handbook for GATE will also be useful.
Duration: 1 hour
Total Questions: 80

Round: Technical Interview
Experience: first question was tell me about yourself, this is the question where you have to give the direction to the interview. after my basic introduction(family, education) i described my projects. interviewer just want to check your interest in engineering and concepts. prepare well

College Name: NIT ALLAHABAD
share interview

4 Interview Rounds

Interview Preparation Tips

Round: Test
Experience: It was fine...
Tips: Be fast and accurate...practice ques from R S Agarwal,for technical just take easy u have not mug up the things ques is quite easy.
Total Questions: 60

Round: Technical Interview
Experience: It was an half hour interview...I explained all the things in a proper manner.
Tips: Be calm and comfortable,go through ur resume in a proper manner.

General Tips: Believe in urself....cpi should be greater than 7
College Name: NIT ALLAHABAD
Motivation: It is an oil industry so it has a vast scope in future.
Funny Moments: Have a little discussion about Lalu prasad yadav
share interview

Recently Viewed

LIST OF COMPANIES

Discover companies

Find best workplace

CAMPUS PLACEMENT

Thapar Institute of Engineering and Technology (TIET)

INTERVIEWS

Nuclear Power Corporation of India

No Interviews

CAMPUS PLACEMENT

Veermata Jijabai Technological Institute (VJTI), Mumbai

CAMPUS PLACEMENT

National Institute of Technology, Surathkal

CAMPUS PLACEMENT

Indian Institute of Technology (IIT), Chennai

CAMPUS PLACEMENT

Indian Institute of Technology (IIT), Mumbai

CAMPUS PLACEMENT

Banarsidas Chandiwala Institute of Information Technology, Delhi

INTERVIEWS

Nuclear Power Corporation of India

No Interviews

INTERVIEWS

Nuclear Power Corporation of India

No Interviews

Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent