Filter interviews by
I applied via Walk-in and was interviewed before Jul 2021. There were 2 interview rounds.
A hydraulic circuit diagram is a schematic representation of a hydraulic system, showing the flow of fluid and the various components involved.
A hydraulic circuit typically consists of a pump, valves, actuators, and fluid lines.
The pump is responsible for generating hydraulic pressure by converting mechanical energy into fluid flow.
Valves control the direction, flow rate, and pressure of the hydraulic fluid.
Actuators, ...
Single acting cylinders have one port for fluid to enter and exit, while double acting cylinders have two ports.
Single acting cylinders use fluid pressure to extend the piston rod and a spring to retract it.
Double acting cylinders use fluid pressure to extend and retract the piston rod.
Single acting cylinders are commonly used in applications where the load is moved in one direction only, such as in dump trucks.
Double ...
Directional valve controls the direction of fluid flow while pressure reducing valve maintains a constant downstream pressure.
Directional valve is used to control the direction of fluid flow in a hydraulic system.
Pressure reducing valve is used to maintain a constant downstream pressure in a hydraulic system.
Directional valve can be either a spool valve or a poppet valve.
Pressure reducing valve can be either a direct a...
Pressure Relief valve releases excess pressure to prevent damage, while Pressure Reducing valve reduces pressure for downstream use.
Pressure Relief valve opens when pressure exceeds set limit to prevent damage to equipment
Pressure Reducing valve reduces pressure for downstream use, maintaining a constant pressure
Pressure Relief valve is typically used in systems with no downstream pressure requirement
Pressure Reducing ...
2 stroke engines have a power stroke in every revolution, while 4 stroke engines have a power stroke in every other revolution.
2 stroke engines have a simpler design and are lighter than 4 stroke engines
2 stroke engines have a higher power-to-weight ratio than 4 stroke engines
4 stroke engines are more fuel efficient and have a longer lifespan than 2 stroke engines
4 stroke engines have a separate lubrication system, whi...
Turbocharger is used in internal combustion engines to increase power output while centrifugal compressor is used in HVAC systems to increase air pressure.
Turbocharger is driven by exhaust gases while centrifugal compressor is driven by an electric motor or a gas turbine.
Turbocharger compresses air before it enters the engine while centrifugal compressor compresses air after it enters the system.
Turbocharger is used in...
Turbocharger increases the air intake in diesel engine to improve performance.
Turbocharger uses exhaust gases to spin a turbine which compresses air intake
Compressed air has more oxygen, allowing more fuel to be burned, increasing power
Turbocharger can increase engine efficiency and reduce emissions
Commonly used in diesel trucks, boats, and heavy machinery
Compressor in diesel engine compresses air to increase its pressure and temperature.
Compressor draws in air from the atmosphere and compresses it before sending it to the engine.
The compressed air is mixed with fuel in the combustion chamber to create a high-pressure explosion that powers the engine.
The compressor is driven by the engine's crankshaft through a belt or gear system.
The compressor also helps to cool the e...
Heat exchange in hydraulic machines is used to regulate temperature and prevent overheating.
Heat exchange helps to maintain the temperature of hydraulic fluid within a safe operating range.
It prevents overheating of the hydraulic system, which can cause damage to the components.
Heat exchangers can be air-cooled or liquid-cooled, depending on the application.
Examples of hydraulic machines that use heat exchange include
I applied via Recruitment Consulltant
I have 15 years of experience as a mechanical foreman.
Managed a team of mechanics and technicians for 15 years
Implemented preventive maintenance programs to reduce downtime
Troubleshooted and repaired mechanical equipment
Trained new employees on safety procedures and equipment operation
I was interviewed in May 2024.
EN standards are a set of European standards that specify requirements for products, services, and systems.
EN standards are developed by the European Committee for Standardization (CEN).
They cover a wide range of industries including mechanical engineering, construction, and electronics.
EN standards ensure products meet certain quality, safety, and performance criteria.
Examples of EN standards include EN 1090 for struc...
I applied via Company Website and was interviewed before Sep 2023. There were 4 interview rounds.
Normet interview questions for popular designations
I applied via Company Website and was interviewed before Sep 2022. There were 4 interview rounds.
Different types of concrete include ready-mix concrete, precast concrete, and high-strength concrete.
Ready-mix concrete is produced in a batching plant and delivered to the construction site in a transit mixer.
Precast concrete is cast in a reusable mold and cured in a controlled environment before being transported to the construction site.
High-strength concrete is designed to withstand heavy loads and is often used in
Handle complaints by listening to the customer, apologizing, investigating the issue, offering a solution, and following up.
Listen actively to the customer's complaint without interrupting.
Apologize for the inconvenience caused and show empathy.
Investigate the issue to understand the root cause.
Offer a solution or compensation to resolve the complaint.
Follow up with the customer to ensure their satisfaction and prevent
The current FY target is $1 million in sales revenue.
The current FY target is set at $1 million in sales revenue.
The target is based on the company's growth projections and market analysis.
The target may be broken down into monthly or quarterly goals to track progress.
Sales team performance will be evaluated based on their ability to meet or exceed the target.
The client base consists of individuals or businesses who purchase products or services from the company.
Individual customers who buy products for personal use
Business clients who purchase products for their company
Repeat customers who regularly buy from the company
Potential clients who have shown interest in the company's offerings
Yes, we are involved in infra and government projects.
We have experience in handling infrastructure projects such as building roads, bridges, and public facilities.
We have successfully completed government projects like constructing government buildings and providing services to government agencies.
Our team is well-versed in the regulations and requirements of infra and government projects.
I applied via Referral and was interviewed before Jan 2023. There were 4 interview rounds.
I applied via Naukri.com and was interviewed before Aug 2022. There were 2 interview rounds.
Material movement in plant involves the transportation of raw materials, work-in-progress, and finished goods within the facility.
Utilize conveyor belts for efficient movement of materials
Implement automated guided vehicles (AGVs) for transporting materials
Utilize forklifts for lifting and moving heavy materials
Implement a well-organized layout to minimize travel distance for materials
Use barcode or RFID technology for
I applied via Approached by Company and was interviewed in Jan 2022. There were 3 interview rounds.
Salary discussion , last CTC, location, benefits
I applied via Walk-in and was interviewed before Dec 2021. There were 2 interview rounds.
I applied via Naukri.com and was interviewed before Feb 2022. There were 2 interview rounds.
Top trending discussions
The duration of Normet interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 23 interviews
Interview experience
based on 209 reviews
Rating in categories
Service Engineer
194
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Service Engineer
61
salaries
| ₹0 L/yr - ₹0 L/yr |
Shift Incharge
25
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
22
salaries
| ₹0 L/yr - ₹0 L/yr |
Technician
19
salaries
| ₹0 L/yr - ₹0 L/yr |
Sandvik Asia
Metso
Epiroc
Atlas Copco