Upload Button Icon Add office photos

NBC Bearings

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

NBC Bearings Graduate Engineer Trainee (Get) Interview Questions and Answers

Updated 21 Jan 2023

NBC Bearings Graduate Engineer Trainee (Get) Interview Experiences

3 interviews found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Group Discussion 

Gd was quite simple you should just keep calm and focus on the given topic.

Round 3 - Technical 

(2 Questions)

  • Q1. They asked about the fav. subject and then asked questions from that subject only
  • Q2. And then asked if Iam comfortable in night shifts or not etc

Interview Preparation Tips

Interview preparation tips for other job seekers - just keep calm and skim two or three of your core subjects to crack the interview

I applied via Campus Placement and was interviewed in Dec 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. It was a normal technical test of your course background
Round 3 - HR 

(1 Question)

  • Q1. About your hobby aim and technical knowledge of your subject of interest
Round 4 - Psychometric Test 

(1 Question)

  • Q1. It was just how is your personality and how you you think about random situations

Interview Preparation Tips

Interview preparation tips for other job seekers - If you clear all the rounds you can get job in NBC bearing

Graduate Engineer Trainee (Get) Interview Questions Asked at Other Companies

asked in JBM Group
Q1. Q: 1 What is IC engine? What is the types of IC engine? Q:2 Diffe ... read more
Q2. How to check for continuity for a wire inside a wall if the start ... read more
Q3. What will be the cost of painting the wall behind me?
Q4. What happen when there is large air void in concrete?
Q5. What are the different types of concrete?

I applied via Campus Placement and was interviewed in Aug 2021. There were 3 interview rounds.

Round 1 - Aptitude Test 

Aptitude test is easy and based on your branch related question

Round 2 - Group Discussion 

Group discussion held between the people who is being selected from round 1 , topics like Corona virus and GDP has asked from us

Round 3 - Technical 

(1 Question)

  • Q1. All questions asked from the project that you have done in past

Interview Preparation Tips

Interview preparation tips for other job seekers - Please be very confident and good communication skills is must

Interview questions from similar companies

Interview Questionnaire 

6 Questions

  • Q1. Draw saturation curve, and explain it
  • Ans. 

    A saturation curve shows the relationship between the concentration of a substance and its ability to bind to a receptor.

    • The curve starts at zero binding when there is no substance present.

    • As the concentration of the substance increases, more receptors become occupied and the binding increases.

    • Eventually, all the receptors become occupied and the binding reaches a maximum, which is the saturation point.

    • Further increase...

  • Answered by AI
  • Q2. Is there any instrument which can measure entropy, explanation?
  • Ans. 

    Yes, entropy can be measured using instruments such as calorimeters and thermometers.

    • Entropy can be measured indirectly through changes in temperature or heat flow.

    • Calorimeters can measure the heat released or absorbed during a reaction, which can be used to calculate entropy.

    • Thermometers can measure changes in temperature, which can also be used to calculate entropy.

    • Entropy can also be estimated using statistical meth...

  • Answered by AI
  • Q3. Define heat and entrophy
  • Ans. 

    Heat is the transfer of energy from one body to another due to a temperature difference. Entropy is a measure of disorder or randomness.

    • Heat is a form of energy that flows from hotter to cooler objects

    • Entropy is a measure of the number of ways in which the energy of a system can be distributed among its particles

    • Heat can be transferred through conduction, convection, and radiation

    • Entropy always increases in a closed sy...

  • Answered by AI
  • Q4. 3-4 question on project
  • Q5. Interested in higher studies or not
  • Ans. 

    Yes, I am interested in pursuing higher studies.

    • I believe that higher education can provide me with more opportunities for personal and professional growth.

    • I am considering pursuing a master's degree in my field of work.

    • I have already started researching different programs and universities.

    • I am also exploring options for scholarships and financial aid.

    • I am excited about the prospect of continuing my education and expan

  • Answered by AI
  • Q6. General HR ques

Interview Preparation Tips

Round: Test
Experience: only technical question, mainly theoretical and very less numericals.
Tips: focus on RAC, HMT, FM, material science and manufacturing.
Duration: 30 minutes
Total Questions: 30

Round: Technical Interview
Experience: duration of interview was 15min
Tips: prepare thermal engg subjects, and explanation regarding your project.it would be beneficial if you are having thermal engg. based project in final year.

Round: HR Interview
Experience: duration was 10 min.

Skills: concepts of thermal engg. subjects
College Name: NIT JAIPUR

Interview Questionnaire 

2 Questions

  • Q1. Questions asked were from Refrigeration and Air conditioning
  • Q2. Questions asked were from Future plan, project

Interview Preparation Tips

Round: Resume Shortlist
Experience: Resume short listing was done on the basis of cgpa>7.Mine was 7.26.

Round: Test
Experience: Only Technical - Small descriptive type of questions
Tips: I prepared fundamentals of FM, RAC, HMT for test.
Duration: 90 minutes

Round: Technical Interview
Experience: Duration of the interview was 35 mins.

Round: HR Interview
Experience: Interview was over the Skype.There were two Technical persons and One HR person in the panel .
Tips: .Prepare Refrigeration cycles thoroughly

General Tips: I think I got selected because I answered every technical questions and I started preparing two weeks earlier before the placements.
Skill Tips: Prepare Refrigeration cycles and fundamentals thoroughly.They looking for Thermal background
Skills: Fundamental knowledge of core subjects
College Name: IIT MADRAS

Interview Preparation Tips

Round: Technical Interview
Experience: THERMAL ENGINEERING QUESTIONS, LIKE ICE ,R&AC. INTERVIEW WAS VERY TECHNICAL. GD WAS VERY EASY. APTITUDE WAS VERY NICE

Round: HR Interview
Experience: GENERAL HR QUESTIONS.

General Tips: ALL THE BEST.
College Name: NIT WARANGAL
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Basic quantitative aptitude, English, and reasoning skills are essential; quick solving abilities are necessary due to the limited time available, making both speed and accuracy important factors.

Round 2 - Technical 

(5 Questions)

  • Q1. What's your favourite subject in engineering?
  • Q2. What is heat treatment processes? Explain in brief.
  • Ans. 

    Heat treatment processes involve heating and cooling metals to alter their properties.

    • Heat treatment processes involve heating metals to specific temperatures and then cooling them at controlled rates.

    • Common heat treatment processes include annealing, tempering, quenching, and normalizing.

    • These processes can change the hardness, strength, toughness, and other properties of metals.

    • For example, quenching involves rapid c...

  • Answered by AI
  • Q3. Tell me about surface tension ?
  • Ans. 

    Surface tension is the property of a liquid that allows it to resist an external force due to the cohesive nature of its molecules.

    • Surface tension is caused by the attraction between the molecules of a liquid, which creates a 'skin' on the surface of the liquid.

    • It is responsible for phenomena like capillary action, where liquids rise in narrow tubes against the force of gravity.

    • Surface tension can be observed in everyd...

  • Answered by AI
  • Q4. Difference between mass and weight?
  • Ans. 

    Mass is the amount of matter in an object, while weight is the force of gravity acting on an object.

    • Mass is a scalar quantity and is measured in kilograms or grams.

    • Weight is a vector quantity and is measured in newtons.

    • Mass remains constant regardless of location, while weight changes depending on the gravitational pull.

    • For example, a person with a mass of 70 kg will have a weight of approximately 686 newtons on Earth,

  • Answered by AI
  • Q5. Modes of heat transfer ?
  • Ans. 

    Modes of heat transfer include conduction, convection, and radiation.

    • Conduction: Heat transfer through direct contact between particles. Example: Touching a hot stove.

    • Convection: Heat transfer through the movement of fluids (liquids or gases). Example: Boiling water.

    • Radiation: Heat transfer through electromagnetic waves. Example: Feeling the warmth of the sun.

  • Answered by AI
Round 3 - HR 

(4 Questions)

  • Q1. Tell me something about yourself ?
  • Q2. What were your roles and responsibilities as a member of the PD Club in your institute?
  • Q3. What motivates you to join our organization?
  • Q4. What is your understanding of our organization?

Interview Preparation Tips

Interview preparation tips for other job seekers - Strengthen your core subjects, particularly those you enjoy, by engaging in practical implementations. Additionally, make it a habit to practice aptitude on a daily basis.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Mar 2023. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all Resume tips
Round 2 - Aptitude Test 

In the aptitude round only 30 minutes provided by company to solve 80 questions.
Maths - 30 questions
Reasoning - 30 question
English -20 questions
There is no negative marking.

Round 3 - Technical 

(1 Question)

  • Q1. I have done b.tech mechanical engineering so interviewer asked technical questions related to - Welding, iron carbon diagram,mohar circle, stress - strain curvee, ic engine process , Carnot cycle , swept v...
Round 4 - Technical 

(1 Question)

  • Q1. Project related questions in deeply.
Round 5 - HR 

(1 Question)

  • Q1. General questions like strength, relocate, shifts timings, accommodations.....

Interview Preparation Tips

Topics to prepare for JBM Group Graduate Engineer Trainee (Get) interview:
  • SOM , THERMODYNAMICS,IC ENGINE,
  • Material technology
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(1 Question)

  • Q1. What is stress and strain?
  • Ans. 

    Stress is the force applied to a material, while strain is the resulting deformation or change in shape.

    • Stress is the external force acting on an object, measured in units like Newtons per square meter (N/m^2) or Pascals (Pa).

    • Strain is the measure of deformation or change in shape of a material due to stress, expressed as a ratio or percentage.

    • Example: When you stretch a rubber band (apply stress), it elongates (strain

  • Answered by AI

I applied via Naukri.com and was interviewed in Jul 2021. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Tell me something about yourself.
  • Q2. Questions related to diesel engine.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be yourself and Revise your basic concepts of core subjects like som., tom, production and Engg Drawings.
Contribute & help others!
anonymous
You can choose to be anonymous

NBC Bearings Interview FAQs

How many rounds are there in NBC Bearings Graduate Engineer Trainee (Get) interview?
NBC Bearings interview process usually has 3-4 rounds. The most common rounds in the NBC Bearings interview process are Technical, Resume Shortlist and Group Discussion.
What are the top questions asked in NBC Bearings Graduate Engineer Trainee (Get) interview?

Some of the top questions asked at the NBC Bearings Graduate Engineer Trainee (Get) interview -

  1. and then asked if Iam comfortable in night shifts or not ...read more
  2. they asked about the fav. subject and then asked questions from that subject on...read more
  3. It was a normal technical test of your course backgro...read more

Recently Viewed

PHOTOS

InsuranceDekho

3 office photos

LIST OF COMPANIES

Credit Bajaar

Overview

INTERVIEWS

Acuity Knowledge Partners

No Interviews

LIST OF COMPANIES

Techno Electric & Engineering Company

Overview

SALARIES

Techno Electric & Engineering Company

LIST OF COMPANIES

Discover companies

Find best workplace

INTERVIEWS

HYUNDAI TRANSYS INDIA

No Interviews

SALARIES

Techno Electric & Engineering Company

INTERVIEWS

Acuity Knowledge Partners

No Interviews

INTERVIEWS

Acuity Knowledge Partners

No Interviews

Tell us how to improve this page.

NBC Bearings Graduate Engineer Trainee (Get) Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
NBC Bearings Graduate Engineer Trainee (Get) Salary
based on 26 salaries
₹2.2 L/yr - ₹6.7 L/yr
37% more than the average Graduate Engineer Trainee (Get) Salary in India
View more details

NBC Bearings Graduate Engineer Trainee (Get) Reviews and Ratings

based on 2 reviews

4.5/5

Rating in categories

4.7

Skill development

4.5

Work-life balance

4.5

Salary

4.5

Job security

4.2

Company culture

4.2

Promotions

4.5

Work satisfaction

Explore 2 Reviews and Ratings
Assistant Manager
221 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Diploma Engineer
196 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
112 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Diploma Mechanical Engineer
109 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Associate Manager
102 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare NBC Bearings with

SKF

4.0
Compare

Timken

3.9
Compare

Schaeffler India

4.2
Compare

Ntn Bearing

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent