Upload Button Icon Add office photos

Filter interviews by

MSA Construction QA QC Engineer Interview Questions, Process, and Tips

Updated 25 Mar 2022

Top MSA Construction QA QC Engineer Interview Questions and Answers

MSA Construction QA QC Engineer Interview Experiences

2 interviews found

I applied via Approached by Company and was interviewed in Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What are cement tests?
  • Ans. 

    Cement tests are conducted to ensure the quality and performance of cement in construction.

    • Cement tests are performed to determine the physical and chemical properties of cement.

    • Some common cement tests include fineness test, setting time test, compressive strength test, and soundness test.

    • Fineness test measures the particle size of cement particles.

    • Setting time test determines the time taken for cement to set and hard...

  • Answered by AI
  • Q2. What is density of steel.
  • Ans. 

    The density of steel is approximately 7.85 grams per cubic centimeter.

    • Density is a measure of how much mass is contained in a given volume.

    • Steel is a commonly used alloy composed primarily of iron and carbon.

    • The density of steel can vary depending on the specific type and composition.

    • The density of stainless steel, for example, is slightly higher than that of carbon steel.

    • The density of steel is often used in engineeri

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - My interview went very well. I work in the company for the benefit of the company

I applied via Approached by Company and was interviewed in Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is cement test.
  • Ans. 

    Cement test is a process of evaluating the quality and properties of cement.

    • Cement tests are conducted to ensure that the cement meets the required standards and specifications.

    • Some common cement tests include fineness test, setting time test, compressive strength test, and soundness test.

    • These tests help to determine the strength, durability, and consistency of the cement.

    • Cement tests are important in construction pro...

  • Answered by AI
  • Q2. What is Steel density.
  • Ans. 

    The density of steel is around 7.85 g/cm³.

    • Steel density is the mass per unit volume of steel.

    • It is measured in grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³).

    • The density of steel varies depending on its composition and temperature.

    • For example, the density of stainless steel is around 8 g/cm³.

    • Steel with higher carbon content has a higher density than steel with lower carbon content.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - My interview went very well.I always work for the company to reach the heights. So that both the company and our work can be done.

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Brief in QMS why it is adopted
  • Ans. 

    QMS is adopted to ensure consistent quality, meet customer requirements, and improve processes.

    • Ensures consistent quality of products or services

    • Helps meet customer requirements and expectations

    • Improves processes and efficiency

    • Reduces risks and errors

    • Enhances customer satisfaction

    • Provides a framework for continuous improvement

  • Answered by AI
  • Q2. Design mix procedure
  • Ans. 

    Design mix procedure involves determining the proportions of materials to create a concrete mix with desired properties.

    • Identify the required strength and durability of the concrete

    • Select suitable materials such as cement, aggregates, and water

    • Calculate the proportions of each material based on mix design methods

    • Test the mix to ensure it meets specifications

    • Adjust the mix if necessary to achieve desired properties

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Grade of concrete
  • Ans. 

    Grade of concrete refers to its strength and durability.

    • Grade of concrete is determined by its compressive strength.

    • It is denoted by a number followed by 'M' (e.g. M20, M25).

    • Higher grade concrete has higher strength and durability.

    • Different grades of concrete are used for different purposes.

    • For example, M20 grade is commonly used for residential construction.

  • Answered by AI
  • Q2. Mix design of concrete
  • Ans. 

    Mix design of concrete involves determining the proportions of ingredients to achieve desired properties.

    • Mix design is the process of determining the proportions of cement, water, aggregates, and admixtures in concrete.

    • It involves considering factors such as strength, workability, durability, and economy.

    • Various methods like the ACI method, British method, and DOE method can be used for mix design.

    • The mix design proces...

  • Answered by AI
Round 2 - Telephonic Call 

(2 Questions)

  • Q1. Status of my life style
  • Q2. My behaviour and other

Interview Preparation Tips

Interview preparation tips for other job seekers - Good
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(3 Questions)

  • Q1. What is pwht ?
  • Ans. 

    PWHT stands for Post Weld Heat Treatment, a process used to reduce residual stresses and improve the mechanical properties of welded joints.

    • PWHT involves heating the welded component to a specific temperature for a certain period of time, followed by controlled cooling.

    • The process helps to eliminate hydrogen cracking, improve toughness, and reduce distortion in the welded joint.

    • Common methods of PWHT include furnace he...

  • Answered by AI
  • Q2. What is wqt range ?
  • Ans. 

    WQT range refers to the range of values for Water Quality Testing in a specific context.

    • WQT range can vary depending on the parameters being tested, such as pH, turbidity, dissolved oxygen, etc.

    • For example, the WQT range for pH in drinking water may be 6.5-8.5.

    • Monitoring and maintaining WQT range is crucial for ensuring safe and clean water supply.

    • Regular testing and analysis of water samples help in determining if the

  • Answered by AI
  • Q3. Acceptance criteria of LPT
  • Ans. 

    LPT acceptance criteria ensure that the test results meet specified requirements.

    • Test results must meet specified requirements outlined in the acceptance criteria

    • Acceptance criteria should be clearly defined and documented

    • Criteria may include specific performance metrics or thresholds

    • Examples: minimum tensile strength, maximum elongation percentage

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Aug 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. Projects related construction questions
  • Q2. Staff to gather relationships
  • Q3. Clint coordination
  • Q4. Technical questions
  • Q5. Time for working

Interview Preparation Tips

Interview preparation tips for other job seekers - L&T company very good
Company employees very sincerely.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jun 2023. There were 6 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Interview with the CV by asking the field role and responsibilties.
  • Q2. Validation for the client interview.
Round 3 - Group Discussion 

Meetings with the project managers and department head with the clients.

Round 4 - One-on-one 

(1 Question)

  • Q1. Department head client validation test the manager.
Round 5 - Technical 

(1 Question)

  • Q1. Written test from the technical choice.
Round 6 - One-on-one 

(1 Question)

  • Q1. Evey site validation in specification knowledge and procedures for field work.
  • Ans. 

    Site validation in specification knowledge and procedures for field work is essential for QA QC Engineers.

    • Understanding the specifications and requirements for each site is crucial

    • Following established procedures and protocols for field work

    • Ensuring that all work is in compliance with industry standards and regulations

    • Regularly updating knowledge on new technologies and best practices

    • Documenting all validation processe

  • Answered by AI

I applied via Approached by Company and was interviewed in Oct 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Coding Test 

Coding test all tests

Round 3 - One-on-one 

(3 Questions)

  • Q1. Aggregate all tests
  • Q2. Concrete and soil all tests
  • Q3. DBM all test questions
Round 4 - Aptitude Test 

QA QC LABORATORY ALL TESTS

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. NDT testing questions
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Apr 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - As hybrid projects in solar&wind 

(2 Questions)

  • Q1. All Question Related to resume and experience in your privous jobs And Project.
  • Q2. All Testing, site related work question, MMS, DC & AC. Quality related documents work. FQP.

Interview Preparation Tips

Topics to prepare for L&T Construction QA QC Engineer interview:
  • All related to role & responsibi
  • All test knowledge. If you work
Interview preparation tips for other job seekers - Only mentioned resume those point you have working on daily practice.
Role and responsibilities.
Focus your target.

MSA Construction Interview FAQs

How many rounds are there in MSA Construction QA QC Engineer interview?
MSA Construction interview process usually has 2 rounds. The most common rounds in the MSA Construction interview process are Resume Shortlist and Technical.
What are the top questions asked in MSA Construction QA QC Engineer interview?

Some of the top questions asked at the MSA Construction QA QC Engineer interview -

  1. What are cement tes...read more
  2. What is density of ste...read more
  3. What is Steel densi...read more

Tell us how to improve this page.

Executive Accountant
5 salaries
unlock blur

₹1.9 L/yr - ₹2 L/yr

Civil Site Engineer
4 salaries
unlock blur

₹2.2 L/yr - ₹4.8 L/yr

Accountant
3 salaries
unlock blur

₹1.9 L/yr - ₹2 L/yr

Civil Engineer
3 salaries
unlock blur

₹4 L/yr - ₹4 L/yr

Member
3 salaries
unlock blur

₹1.6 L/yr - ₹1.7 L/yr

Explore more salaries
Compare MSA Construction with

Larsen & Toubro Limited

4.0
Compare

L&T Construction

4.0
Compare

Tata Projects

4.3
Compare

Megha Engineering & Infrastructures

3.9
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview