Add office photos
Filter interviews by
MSA Construction QA QC Engineer Interview Questions, Process, and Tips
Top MSA Construction QA QC Engineer Interview Questions and Answers
- Q1. What are cement tests?
- Q2. What is density of steel.
- Q3. What is Steel density.
MSA Construction QA QC Engineer Interview Experiences
2 interviews found
I applied via Approached by Company and was interviewed in Sep 2021. There were 2 interview rounds.
(2 Questions)
- Q1. What is cement test.
- Ans.
Cement test is a process of evaluating the quality and properties of cement.
Cement tests are conducted to ensure that the cement meets the required standards and specifications.
Some common cement tests include fineness test, setting time test, compressive strength test, and soundness test.
These tests help to determine the strength, durability, and consistency of the cement.
Cement tests are important in construction pro...
- Q2. What is Steel density.
- Ans.
The density of steel is around 7.85 g/cm³.
Steel density is the mass per unit volume of steel.
It is measured in grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³).
The density of steel varies depending on its composition and temperature.
For example, the density of stainless steel is around 8 g/cm³.
Steel with higher carbon content has a higher density than steel with lower carbon content.
Interview Preparation Tips
I applied via Approached by Company and was interviewed in Sep 2021. There were 2 interview rounds.
(2 Questions)
- Q1. What are cement tests?
- Ans.
Cement tests are conducted to ensure the quality and performance of cement in construction.
Cement tests are performed to determine the physical and chemical properties of cement.
Some common cement tests include fineness test, setting time test, compressive strength test, and soundness test.
Fineness test measures the particle size of cement particles.
Setting time test determines the time taken for cement to set and hard...
- Q2. What is density of steel.
- Ans.
The density of steel is approximately 7.85 grams per cubic centimeter.
Density is a measure of how much mass is contained in a given volume.
Steel is a commonly used alloy composed primarily of iron and carbon.
The density of steel can vary depending on the specific type and composition.
The density of stainless steel, for example, is slightly higher than that of carbon steel.
The density of steel is often used in engineeri
Interview Preparation Tips
Interview questions from similar companies
(2 Questions)
- Q1. Brief in QMS why it is adopted
- Ans.
QMS is adopted to ensure consistent quality, meet customer requirements, and improve processes.
Ensures consistent quality of products or services
Helps meet customer requirements and expectations
Improves processes and efficiency
Reduces risks and errors
Enhances customer satisfaction
Provides a framework for continuous improvement
- Q2. Design mix procedure
- Ans.
Design mix procedure involves determining the proportions of materials to create a concrete mix with desired properties.
Identify the required strength and durability of the concrete
Select suitable materials such as cement, aggregates, and water
Calculate the proportions of each material based on mix design methods
Test the mix to ensure it meets specifications
Adjust the mix if necessary to achieve desired properties
QA QC Engineer Interview Questions & Answers
Kalpataru Projects International
Anonymous
posted on 6 Feb 2024
(2 Questions)
- Q1. Grade of concrete
- Ans.
Grade of concrete refers to its strength and durability.
Grade of concrete is determined by its compressive strength.
It is denoted by a number followed by 'M' (e.g. M20, M25).
Higher grade concrete has higher strength and durability.
Different grades of concrete are used for different purposes.
For example, M20 grade is commonly used for residential construction.
- Q2. Mix design of concrete
- Ans.
Mix design of concrete involves determining the proportions of ingredients to achieve desired properties.
Mix design is the process of determining the proportions of cement, water, aggregates, and admixtures in concrete.
It involves considering factors such as strength, workability, durability, and economy.
Various methods like the ACI method, British method, and DOE method can be used for mix design.
The mix design proces...
(2 Questions)
- Q1. Status of my life style
- Q2. My behaviour and other
Interview Preparation Tips
(3 Questions)
- Q1. What is pwht ?
- Ans.
PWHT stands for Post Weld Heat Treatment, a process used to reduce residual stresses and improve the mechanical properties of welded joints.
PWHT involves heating the welded component to a specific temperature for a certain period of time, followed by controlled cooling.
The process helps to eliminate hydrogen cracking, improve toughness, and reduce distortion in the welded joint.
Common methods of PWHT include furnace he...
- Q2. What is wqt range ?
- Ans.
WQT range refers to the range of values for Water Quality Testing in a specific context.
WQT range can vary depending on the parameters being tested, such as pH, turbidity, dissolved oxygen, etc.
For example, the WQT range for pH in drinking water may be 6.5-8.5.
Monitoring and maintaining WQT range is crucial for ensuring safe and clean water supply.
Regular testing and analysis of water samples help in determining if the
- Q3. Acceptance criteria of LPT
- Ans.
LPT acceptance criteria ensure that the test results meet specified requirements.
Test results must meet specified requirements outlined in the acceptance criteria
Acceptance criteria should be clearly defined and documented
Criteria may include specific performance metrics or thresholds
Examples: minimum tensile strength, maximum elongation percentage
QA QC Engineer Interview Questions & Answers
Larsen & Toubro Limited
Anonymous
posted on 24 Sep 2023
Selected
I applied via Naukri.com and was interviewed in Aug 2023. There were 2 interview rounds.
(5 Questions)
- Q1. Projects related construction questions
- Q2. Staff to gather relationships
- Q3. Clint coordination
- Q4. Technical questions
- Q5. Time for working
Interview Preparation Tips
Company employees very sincerely.
QA QC Engineer Interview Questions & Answers
Afcons Infrastructure
Ramadurai Ramapragasam
posted on 29 Jul 2023
Selected
I applied via Company Website and was interviewed in Jun 2023. There were 6 interview rounds.
(2 Questions)
- Q1. Interview with the CV by asking the field role and responsibilties.
- Q2. Validation for the client interview.
Meetings with the project managers and department head with the clients.
(1 Question)
- Q1. Department head client validation test the manager.
(1 Question)
- Q1. Written test from the technical choice.
(1 Question)
- Q1. Evey site validation in specification knowledge and procedures for field work.
- Ans.
Site validation in specification knowledge and procedures for field work is essential for QA QC Engineers.
Understanding the specifications and requirements for each site is crucial
Following established procedures and protocols for field work
Ensuring that all work is in compliance with industry standards and regulations
Regularly updating knowledge on new technologies and best practices
Documenting all validation processe
QA QC Engineer Interview Questions & Answers
Megha Engineering & Infrastructures
Anonymous
posted on 2 Nov 2023
I applied via Approached by Company and was interviewed in Oct 2023. There were 4 interview rounds.
Coding test all tests
(3 Questions)
- Q1. Aggregate all tests
- Q2. Concrete and soil all tests
- Q3. DBM all test questions
QA QC LABORATORY ALL TESTS
(1 Question)
- Q1. NDT testing questions
Selected
I applied via Walk-in and was interviewed in Apr 2023. There were 2 interview rounds.
(2 Questions)
- Q1. All Question Related to resume and experience in your privous jobs And Project.
- Q2. All Testing, site related work question, MMS, DC & AC. Quality related documents work. FQP.
Interview Preparation Tips
- All related to role & responsibi
- All test knowledge. If you work
Role and responsibilities.
Focus your target.
MSA Construction Interview FAQs
Tell us how to improve this page.
QA QC Engineer Interview Questions from Similar Companies
|
Executive Accountant
5
salaries
|  ₹1.9 L/yr - ₹2 L/yr |
|
Civil Site Engineer
4
salaries
| ₹2.2 L/yr - ₹4.8 L/yr |
|
Accountant
3
salaries
| ₹1.9 L/yr - ₹2 L/yr |
|
Civil Engineer
3
salaries
| ₹4 L/yr - ₹4 L/yr |
|
Member
3
salaries
| ₹1.6 L/yr - ₹1.7 L/yr |
Larsen & Toubro Limited
L&T Construction
Tata Projects
Megha Engineering & Infrastructures
Calculate your in-hand salary
- Home >
- Interviews >
- MSA Construction Interview Questions >
- MSA Construction QA QC Engineer Interview Questions
