Add office photos
Filter interviews by
Motherson Automotive Technologies and Engineering new Product Development Engineer Interview Questions, Process, and Tips
Motherson Automotive Technologies and Engineering new Product Development Engineer Interview Experiences
1 interview found
Vikash kumar
Selected
I applied via LinkedIn and was interviewed before Nov 2022. There were 2 interview rounds.
(5 Questions)
- Q1. You should to know Deep knowledge about plastic and its component apart from this you should also know about 2plate and 3plate mold
- Ans. How many types of plastic and its shrinkage and density.
- Q2. What is shrink and shrinkage, what is 2plate and 3plate mold
- Ans.
Shrink is the reduction in size of a plastic part during cooling, while shrinkage refers to the percentage of size reduction. 2plate and 3plate molds are types of injection molds used in plastic part manufacturing.
Shrink is caused by the cooling and solidification of the plastic material.
Shrinkage is expressed as a percentage and is calculated by comparing the dimensions of the molded part to the dimensions of the mold...
- Q3. What is injectedmolding
- Ans.
Injection molding is a manufacturing process used to produce parts by injecting molten material into a mold.
It is a widely used manufacturing process in various industries.
The molten material is typically a thermoplastic or thermosetting polymer.
The material is injected into a mold cavity under high pressure.
Once cooled and solidified, the mold is opened, and the part is ejected.
Injection molding allows for the product...
- Q4. What is mold temp
- Ans.
Mold temp refers to the temperature of the mold used in the injection molding process.
Mold temp is a critical factor in determining the quality and properties of the final product.
It affects the cooling rate of the molten material inside the mold.
Maintaining proper mold temp helps in achieving consistent part dimensions and minimizing defects.
Examples: High mold temp can lead to longer cooling times but better surface ...
- Q5. What is shrinkage value of material
- Ans.
Shrinkage value of a material refers to the amount by which the material contracts or shrinks during the cooling process after being molded or formed.
Shrinkage value is typically expressed as a percentage of the original size of the material.
It is an important factor to consider in manufacturing processes, especially in injection molding and casting.
Different materials have different shrinkage values, so it is crucial ...
Interview Preparation Tips
- Automobile related
Top trending discussions
Interview questions from similar companies
(2 Questions)
- Q1. About project recently work.
- Q2. What are the challenges with this project
Interview Preparation Tips
First round is aptitude test all type of questions asked like verbal, reasoning and Technical
(2 Questions)
- Q1. Explain stress, strain curve diagram with example?
- Ans.
Stress-strain curve shows relationship between stress and strain in a material under tension.
Stress-strain curve is a graphical representation of how a material deforms under stress.
It typically consists of a linear elastic region, a yield point, plastic deformation, and ultimate failure.
Example: Steel has a high yield strength, so its stress-strain curve shows a steep initial slope.
Example: Rubber has a low yield stre...
- Q2. What is DOF? How many degrees of freedom from any object
- Ans.
DOF stands for Degrees of Freedom. It refers to the number of independent parameters that define the configuration of an object.
DOF is the number of ways a rigid body can move in 3D space.
For a rigid body in 3D space, there are 6 degrees of freedom - 3 translational and 3 rotational.
Examples of DOF include linear motion along x, y, z axes and rotational motion around x, y, z axes.
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed before Dec 2021. There were 2 interview rounds.
(4 Questions)
- Q1. About design engineer questions
- Q2. Previous company questions
- Q3. Basic design questions
- Q4. Autocad test questions
Interview Preparation Tips
- AutoCAD 2D
Selected
I applied via Company Website and was interviewed before Oct 2022. There were 3 interview rounds.
(2 Questions)
- Q1. CAD test in catia
- Ans.
CAD test in CATIA evaluates candidate's proficiency in using CATIA software for designing engineering projects.
Demonstrate ability to create 3D models using CATIA software
Show proficiency in creating assemblies and performing simulations in CATIA
Explain experience in generating 2D drawings and technical documentation in CATIA
- Q2. Plastic material, defects
(1 Question)
- Q1. Tell me about yourself Favourite engineering subject
Interview Preparation Tips
Plastic product design questions
I applied via Naukri.com and was interviewed in Aug 2021. There were 3 interview rounds.
Interview Questionnaire
1 Question
- Q1. Starts with tell me about yourself, previous company experience if you are experienced, since I interviewed for design(R&D).they starts with machining operation, gdnt, dfmea, risk or change management and ...
Interview Preparation Tips
All the best.
I applied via Referral and was interviewed before Jul 2021. There were 4 interview rounds.
(1 Question)
- Q1. 1. Introduction 2. Development process
(1 Question)
- Q1. 1. Introduction 2. Qualification 3. Experience 4 salary
(1 Question)
- Q1. 1. Experience 2. SAP knowledge 3. Design knowledge
Interview Preparation Tips
Selected
I applied via Walk-in and was interviewed in Dec 2023. There was 1 interview round.
(5 Questions)
- Q1. Part drawing 2D or 3D
- Ans.
2D is a flat picture while 3D is one that has depth.
- Q2. Sketcher 2d drawings
- Ans.
First of all we sketch 2d drawings after we assembly the complete object
- Q3. Assembly all part drawing
- Ans.
When 2D sketch complete, after we calling parts to make complete assembly.
- Q4. Generative Sheet metal
- Q5. Generative drafting
Interview Preparation Tips
- CATIA
- AutoCAD
Product Development Engineer Interview Questions & Answers
Mando Automotive
Anonymous
posted on 1 Nov 2023
Selected
I applied via campus placement at Sastra University and was interviewed before Nov 2022. There were 2 interview rounds.
(1 Question)
- Q1. Abput electronics
(3 Questions)
- Q1. Tell me about yourself
- Ans.
I am a design engineer with a passion for creating innovative solutions.
Experienced in using CAD software such as AutoCAD and SolidWorks
Proficient in designing mechanical components and systems
Strong problem-solving and analytical skills
Collaborative team player with excellent communication skills
Successfully completed projects like designing a new product for a client and improving manufacturing processes
- Q2. What are the top 5 features of CATIA?
- Ans.
CATIA is a CAD software with various features. Here are the top 5:
Advanced surface modeling
Assembly design and management
Kinematics simulation
Sheet metal design
Generative shape design
- Q3. What is component drawing vs assembly drawing
- Ans.
Component drawing shows individual parts with dimensions and specifications, while assembly drawing shows how parts fit together to form a complete product.
Component drawing focuses on individual parts and their specifications
Assembly drawing shows how parts fit together to form a complete product
Component drawing is used for manufacturing and quality control
Assembly drawing is used for assembly instructions and mainte...
Interview Preparation Tips
Motherson Automotive Technologies and Engineering Interview FAQs
Tell us how to improve this page.
Motherson Automotive Technologies and Engineering Interviews By Designations
- Motherson Automotive Technologies and Engineering Design Engineer Interview Questions
- Motherson Automotive Technologies and Engineering Engineer Interview Questions
- Motherson Automotive Technologies and Engineering Graduate Engineer Trainee (Get) Interview Questions
- Motherson Automotive Technologies and Engineering Production Engineer Interview Questions
- Motherson Automotive Technologies and Engineering Quality Engineer Interview Questions
- Motherson Automotive Technologies and Engineering Quality Inspector Interview Questions
- Motherson Automotive Technologies and Engineering Senior Engineer Interview Questions
- Motherson Automotive Technologies and Engineering Trainee Technician Interview Questions
- Show more
Interview Questions for Popular Designations
- NPD Engineer Interview Questions
- Research and Development Interview Questions
- Product Development Engineer Interview Questions
- Senior Process Engineer Interview Questions
- Design Engineer Interview Questions
- Design & Development Engineer Interview Questions
- Manager new Product Development Interview Questions
- Assistant Engineering Manager Interview Questions
- Show more
People are getting interviews through
Interview Questions from Similar Companies
Fast track your campus placements
Motherson Automotive Technologies and Engineering new Product Development Engineer Reviews and Ratings
based on 2 reviews
Rating in categories
|
Engineer
305
salaries
|  ₹2.2 L/yr - ₹7 L/yr |
|
Assistant Engineer
268
salaries
| ₹1.5 L/yr - ₹5.7 L/yr |
|
Senior Engineer
255
salaries
| ₹3.6 L/yr - ₹11 L/yr |
|
Trainee Technician
241
salaries
| ₹1.2 L/yr - ₹3.6 L/yr |
|
Assistant Manager
238
salaries
| ₹4.2 L/yr - ₹12 L/yr |
Bharat Forge
Sundaram Clayton
Rane Group
UNO Minda
Calculate your in-hand salary
- Home >
- Interviews >
- Motherson Automotive Technologies and Engineering Interview Questions >
- Motherson Automotive Technologies and Engineering new Product Development Engineer Interview Questions
