Upload Button Icon Add office photos

Mando Automotive

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Mando Automotive Product Development Engineer Interview Questions and Answers

Updated 1 Nov 2023

Mando Automotive Product Development Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Nov 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Abput electronics

Interview questions from similar companies

I was interviewed in Dec 2016.

Interview Questionnaire 

4 Questions

  • Q1. Difference between a two stroke and a four stroke engine?
  • Ans. 

    A two-stroke engine completes a power cycle in two strokes of the piston, while a four-stroke engine completes it in four strokes.

    • Two-stroke engines have a simpler design and are lighter than four-stroke engines.

    • Two-stroke engines have a higher power-to-weight ratio but lower fuel efficiency compared to four-stroke engines.

    • Four-stroke engines have separate intake, compression, power, and exhaust strokes, while two-stro...

  • Answered by AI
  • Q2. Pictorial representation of a SI engine with valve opening and showing tdc and bdc.
  • Ans. 

    A pictorial representation of a SI engine with valve opening, TDC, and BDC.

    • SI engine stands for Spark Ignition engine, which is commonly used in gasoline-powered vehicles.

    • Valve opening refers to the movement of the intake and exhaust valves to allow fuel-air mixture in and exhaust gases out of the combustion chamber.

    • TDC (Top Dead Center) is the position of the piston at the extreme top of its stroke.

    • BDC (Bottom Dead Ce...

  • Answered by AI
  • Q3. What change will u make or what improvement will you do to any product manufactured by TVS?
  • Ans. 

    I would improve the fuel efficiency of TVS motorcycles by implementing advanced engine technology.

    • Implementing electronic fuel injection system for better fuel management

    • Introducing hybrid technology for improved mileage

    • Optimizing aerodynamics of the motorcycle for reduced drag

    • Using lightweight materials for better fuel economy

  • Answered by AI
  • Q4. Tell me about yourself.
  • Ans. 

    I am a dedicated production engineer with a strong background in manufacturing processes and quality control.

    • Graduated with a degree in Mechanical Engineering

    • Experience working in a manufacturing plant for 3 years

    • Proficient in CAD software for designing production layouts

    • Implemented lean manufacturing principles to improve efficiency

    • Led a team in reducing production downtime by 20%

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Basic aptitude questions including a few basic technical questions
Duration: 1 hour
Total Questions: 60

Round: Technical + HR Interview
Experience: Interviewers were friendly, started with a casual talk, about themselves then asking about me, my interests and stuff, then they got into technical stuff followed by few HR questions
Tips: Be free and answer confidently

Skills: Presence Of Mind, Technical Skills, Behavioural Skills
College Name: IIT Madras

I applied via Campus Placement and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Tell me about your self?

Interview Preparation Tips

Interview preparation tips for other job seekers - .
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Electronics components ?
  • Q2. Basic electronics questions
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Mathamatics resoning

I applied via Company Website and was interviewed before Dec 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(5 Questions)

  • Q1. How to manage your man power?
  • Q2. Technical questions about machines.
  • Q3. How to maintain production quantity and quality output?
  • Ans. 

    Maintain production quantity and quality output by optimizing processes, training employees, and monitoring performance.

    • Regularly review and optimize production processes to eliminate inefficiencies and reduce waste.

    • Provide ongoing training and development opportunities for employees to improve their skills and knowledge.

    • Implement quality control measures to ensure that products meet or exceed customer expectations.

    • Mon...

  • Answered by AI
  • Q4. Questions about family backgrounds
  • Q5. Introduce yourself about your own

Interview Preparation Tips

Interview preparation tips for other job seekers - Sir,
I will thankfull for given this opportunity to Express my knowledge..

I applied via Naukri.com and was interviewed before Oct 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. No any questions

Interview Preparation Tips

Interview preparation tips for other job seekers - This interview was a technical one but was majorly a stress test

I applied via Walk-in and was interviewed in Oct 2021. There were 4 interview rounds.

Interview Questionnaire 

6 Questions

  • Q1. Plz introduce your self.
  • Q2. What is difference between petrol engine & diesel engine.
  • Ans. 

    Petrol engines use spark ignition while diesel engines use compression ignition.

    • Petrol engines use spark plugs to ignite the fuel-air mixture, while diesel engines rely on compression to ignite the fuel.

    • Petrol engines typically have higher RPM (revolutions per minute) compared to diesel engines.

    • Diesel engines are more fuel-efficient than petrol engines.

    • Petrol engines are generally lighter and more compact than diesel e...

  • Answered by AI
  • Q3. Types of brakes
  • Ans. 

    Types of brakes include disc brakes, drum brakes, regenerative brakes, and hydraulic brakes.

    • Disc brakes use calipers to squeeze brake pads against a disc rotor.

    • Drum brakes use brake shoes that press against the inside of a drum.

    • Regenerative brakes convert kinetic energy into electrical energy to recharge the battery.

    • Hydraulic brakes use fluid pressure to apply force to the brake pads or shoes.

  • Answered by AI
  • Q4. How many years or months of experience.
  • Q5. Where are you stay in pithampur .
  • Q6. Why are resign to previous company

Interview Preparation Tips

Interview preparation tips for other job seekers - Well prepared for these types of question & go

I applied via Walk-in

Round 1 - HR 

(1 Question)

  • Q1. Tell about your self

Interview Preparation Tips

Interview preparation tips for other job seekers - Normal question asked in Hr interview , Tell about your self
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Walk-in and was interviewed before May 2023. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. Which is your last company and how many years experience are you and they asked much more related my experience
  • Q2. And I answered all those question with my experience regarding my work

Interview Preparation Tips

Topics to prepare for ZF Commercial Vehicle Control Systems Production Engineer interview:
  • Buyer Activities
Interview preparation tips for other job seekers - Learn more and gain knowledge and apply it surely it will make sucess
Contribute & help others!
anonymous
You can choose to be anonymous

Mando Automotive Interview FAQs

How many rounds are there in Mando Automotive Product Development Engineer interview?
Mando Automotive interview process usually has 2 rounds. The most common rounds in the Mando Automotive interview process are Resume Shortlist and One-on-one Round.

Recently Viewed

JOBS

Avalara Technologies

No Jobs

INTERVIEWS

Datamatics Global Services

No Interviews

INTERVIEWS

Emerson Electric Co.

No Interviews

SALARIES

TVS Sundram Fasteners

CAMPUS PLACEMENT

Sona College of Technology, Salem

REVIEWS

Avalara Technologies

No Reviews

INTERVIEWS

Infor Global Solution

No Interviews

DESIGNATION

INTERVIEWS

Amazon Web Services

No Interviews

INTERVIEWS

Prodapt

No Interviews

Tell us how to improve this page.

Mando Automotive Product Development Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Tata Motors Interview Questions
4.2
 • 999 Interviews
Bosch Interview Questions
4.2
 • 330 Interviews
TVS Motor Interview Questions
4.0
 • 313 Interviews
JBM Group Interview Questions
4.0
 • 268 Interviews
Ashok Leyland Interview Questions
4.1
 • 239 Interviews
UNO Minda Interview Questions
4.0
 • 169 Interviews
Exide Industries Interview Questions
3.5
 • 169 Interviews
Subros Interview Questions
3.9
 • 167 Interviews
Ceat Tyres Interview Questions
4.0
 • 161 Interviews
Apollo Tyres Interview Questions
4.0
 • 129 Interviews
View all
Oprating Engineer
761 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
499 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
243 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
231 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
159 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Mando Automotive with

Bosch

4.2
Compare

ZF Steering Gear

3.7
Compare

Continental

3.9
Compare

ZF Commercial Vehicle Control Systems

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent