Metso Engineer 1 Interview Questions and Answers

Q1. Basic knowledge of civil engineering
Ans. 
Clear cover, steel unit weight, leveling, shuttering , quantity of concrete
Answered by Leeladhar Patnaik
Add your answer
Q2. What is civil engineering
Ans. 
Civil engineering is a branch of engineering that deals with the design, construction, and maintenance of infrastructure projects.
• Involves designing and constructing buildings, bridges, roads, dams, and other structures

• Focuses on ensuring structures are safe, functional, and sustainable

• Requires knowledge of materials, construction techniques, and project management

• Involves collaboration with architects, contractors, an...read more
Answered by AI
View 1 more answer
Q3. RCC design grade of concrete
Ans. 
RCC design grade of concrete refers to the strength of the concrete mix used in reinforced concrete construction.
• RCC design grade is denoted by a number followed by 'M' (e.g. M20, M30, etc.)

• Higher grade concrete (e.g. M30) is used for structures requiring higher strength like bridges and high-rise buildings

• Lower grade concrete (e.g. M20) is used for general construction purposes like residential buildings
Answered by AI
View 1 more answer
Q4. Bar bending scheduling
Add your answer
Q5. Work planning of job
Ans. 
Work planning of job involves creating a detailed schedule and timeline for completing tasks and projects.
• Identify project goals and objectives

• Break down tasks into smaller components

• Estimate time and resources needed for each task

• Create a timeline with deadlines for each task

• Assign responsibilities to team members

• Regularly review and adjust the plan as needed
Answered by AI
Add your answer

Q1. How does working principal of fan utilised in mine
Ans. 
Fans are used in mines to provide ventilation and circulate air to maintain a safe and comfortable working environment for miners.
• Fans are typically installed at the surface or underground to draw in fresh air and remove stale air from the mine workings.

• The fan blades rotate to create airflow, which helps to dilute and remove harmful gases, dust, and fumes from the mine.

• Proper ventilation with fans also helps to contro...read more
Answered by AI
Add your answer
Q2. Eloborate your final year project
Add your answer

Q1. Are you flexible enough to be located in a remote location?
Ans. 
Yes, I am open to being located in a remote location for the right opportunity.
• I am willing to relocate for the right job opportunity

• I have experience working remotely or in different locations

• I am adaptable and can thrive in new environments
Answered by AI
Add your answer
Q2. Why your second semester scores are low as compared to other semesters?
Add your answer

Q1. Can you provide a basic introduction along with your work experience?
Add your answer

Q1. What is your strength
Add your answer
Q2. What is your weakness
Add your answer

Q1. Question regarding motor, generator, Alternator and transformer.
Add your answer
Q2. What are causes of hot bearings?
Ans. 
Causes of hot bearings include lack of lubrication, overloading, misalignment, and contamination.
• Lack of lubrication: Insufficient or degraded lubricant can cause increased friction and heat.

• Overloading: Excessive load on the bearing can lead to overheating.

• Misalignment: Improper alignment of the bearing can cause it to operate under stress and generate heat.

• Contamination: Foreign particles or debris in the bearing can
Answered by AI
View 1 more answer
Q3. What causes are responsible for over-heating of Commutator in a DC motor?
Ans. 
Over-heating of Commutator in a DC motor can be caused by factors like excessive current, poor ventilation, dirty environment, and worn-out brushes.
• Excessive current flowing through the motor can cause the commutator to overheat.

• Poor ventilation around the motor can lead to inadequate cooling, resulting in overheating.

• A dirty environment can cause dust and debris to accumulate on the commutator, hindering heat dissipat...read more
Answered by AI
View 2 more answers
Q4. What will happen if a shunt motor is directly connected to the supply line?
Ans. 
The shunt motor will run at dangerously high speeds and may get damaged.
• The motor will run at its no-load speed, which is much higher than its rated speed.

• This can lead to overheating and mechanical stress on the motor components.

• The motor may get damaged or fail prematurely if directly connected to the supply line.
Answered by AI
View 1 more answer

Q1. Question related to motor, generator Alternator and transformer
Add your answer

Q1. Technical,hr,present past detail of work
Add your answer
Q2. Whatever they ask during pannel demands
Add your answer

Basic aptitude test with time limit

Q1. Basically questions about the trade about you are working or knowledge of job and experience , the job in the field of interest is very important
Add your answer
Q2. Ask about educational qualification and any achievements
Add your answer

Q1. Ask about technical project done during my b.tech
Add your answer

Q1. Why should we hire you?
Ans. 
I have extensive experience in senior engineering roles and a proven track record of delivering high-quality results.
• I have a deep understanding of complex engineering concepts and can apply them effectively in real-world scenarios.

• I have successfully led and managed teams, ensuring efficient collaboration and achieving project goals.

• I consistently stay updated with the latest industry trends and technologies, allowing...read more
Answered by AI
Add your answer
Q2. Why are you looking for a change?
Ans. 
Seeking new challenges and growth opportunities in a different organization.
• Looking for a more challenging role

• Seeking professional growth and development

• Interested in exploring new technologies and industries

• Want to work in a different organizational culture

• Seeking better work-life balance
Answered by AI
View 1 more answer
Q3. Share details of your previous job.
Ans. 
I worked as a Senior Engineer at XYZ Company.
• Led a team of engineers in developing and implementing new software solutions.

• Collaborated with cross-functional teams to ensure project success.

• Designed and implemented scalable and efficient code.

• Performed code reviews and provided technical guidance to junior engineers.

• Successfully delivered multiple projects on time and within budget.

• Implemented best practices and optimi...read more
Answered by AI
Add your answer