i
Metso
Filter interviews by
Clear (1)
I applied via Campus Placement and was interviewed before Dec 2023. There were 3 interview rounds.
It's very tough and you need to better better device with very fast internet
Torque is a measure of the rotational force applied to an object.
Torque is the product of force and the distance from the point of rotation to the point where the force is applied.
It is measured in units of force multiplied by distance, such as Newton-meters or foot-pounds.
Torque is essential in understanding the effectiveness of motors, engines, and other rotating systems.
Higher torque allows for greater rotational fo...
Strain stress curve shows relationship between stress and strain. Yield stress is point where material deforms permanently.
Strain stress curve is a graph showing how stress (force applied) changes with strain (deformation) in a material.
Yield stress is the point on the curve where the material begins to deform permanently, even after the stress is removed.
After yield stress, material may undergo plastic deformation bef...
Understanding material properties and manufacturing processes is crucial for designing efficient and effective products.
Material properties refer to characteristics such as strength, hardness, elasticity, and thermal conductivity.
Manufacturing processes include casting, machining, forming, and additive manufacturing.
Selecting the right material and manufacturing process is essential for achieving desired product perfor
SFD and BMD are diagrams used to analyze the internal forces in beams. Simple bending moments formula can be derived from these diagrams.
SFD (Shear Force Diagram) shows the variation of shear force along the length of the beam.
BMD (Bending Moment Diagram) shows the variation of bending moment along the length of the beam.
Simple bending moments formula can be derived from the BMD by analyzing the points where the bendin...
My hobbies include hiking, painting, and playing the guitar. I make time for them by prioritizing and time management.
I prioritize my hobbies by scheduling specific time slots for them in my calendar.
I use time management techniques to ensure I have enough time for my hobbies, such as setting deadlines for work tasks.
I find ways to incorporate my hobbies into my daily routine, such as painting during my lunch break or ...
I applied via Recruitment Consulltant and was interviewed before Jan 2024. There were 2 interview rounds.
I applied via Recruitment Consulltant and was interviewed in Oct 2022. There were 2 interview rounds.
I applied via Referral and was interviewed before Jul 2023. There were 2 interview rounds.
Metso interview questions for designations
I applied via Recruitment Consulltant and was interviewed before May 2023. There was 1 interview round.
I applied via Naukri.com and was interviewed in Sep 2021. There were 3 interview rounds.
I applied via Recruitment Consultant and was interviewed in Jan 2021. There were 3 interview rounds.
Top trending discussions
I applied via Campus Placement and was interviewed before Oct 2021. There were 2 interview rounds.
To create a manufacturing drawing for a complex machined frame, precise measurements and specifications are required.
Gather all necessary information about the frame's dimensions and specifications
Create a detailed 2D or 3D model of the frame using CAD software
Include all necessary annotations, dimensions, and tolerances in the drawing
Specify the materials and finishes to be used
Ensure that the drawing complies with in
Balancing procedure for rotating equipment involves identifying unbalance, measuring vibration, and adding or removing weight to achieve balance.
Identify unbalance by measuring vibration
Determine the amount and location of unbalance
Add or remove weight to achieve balance
Repeat the process until vibration is within acceptable limits
Use balancing equipment such as a balancing machine or portable balancer
Examples include
The manufacturing procedure for a big welded and machined frame made of stainless steel involves several steps.
Design the frame using CAD software
Cut the stainless steel sheets into required sizes using plasma or laser cutting machines
Weld the cut pieces together using TIG or MIG welding techniques
Machine the welded frame to achieve the desired shape and dimensions using CNC machines
Perform surface finishing operations...
SS cladding is done on MS frame to protect it from corrosion and increase its durability.
The MS frame is first cleaned and prepared for cladding.
The SS sheets are cut to size and welded onto the MS frame.
The joints are then ground and polished to ensure a smooth finish.
The cladding thickness and welding quality are checked to ensure compliance with standards.
The final product is inspected for any defects or imperfectio
Cantilevering procedure in wire section involves supporting a wire on one end while the other end is being worked on.
The wire is clamped or held in place on one end
The other end is then bent or cut to the desired shape
Examples include creating hooks or loops on the end of a wire
Cantilevering can also be used to create a spring-like effect in a wire
A tri nip press concept drawing for efficient material processing.
Consider the size and shape of the material being processed
Include three rollers with adjustable pressure
Incorporate safety features such as emergency stop buttons
Include a control panel for adjusting pressure and speed
Consider the material of the rollers for durability
Ensure the design allows for easy maintenance and cleaning
I applied via Naukri.com and was interviewed in Mar 2024. There was 1 interview round.
Theory of failure is a concept used in engineering to predict the failure of materials under different loading conditions.
Theory of failure helps engineers understand how materials will behave under stress and strain.
Different theories of failure include maximum normal stress theory, maximum shear stress theory, and maximum strain energy theory.
Finite Element Method (FEM) is a numerical technique used to analyze stress...
The SS curve is a stress-strain curve used to analyze the behavior of a material under stress.
The SS curve, also known as the stress-strain curve, shows the relationship between stress (force applied per unit area) and strain (deformation) of a material.
It typically consists of three main regions: elastic deformation, plastic deformation, and fracture.
The elastic region is where the material deforms elastically and ret...
I applied via Recruitment Consulltant and was interviewed in May 2023. There were 3 interview rounds.
based on 6 interviews
2 Interview rounds
based on 40 reviews
Rating in categories
Design Engineer
168
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
135
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
132
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
96
salaries
| ₹0 L/yr - ₹0 L/yr |
Deputy Manager
70
salaries
| ₹0 L/yr - ₹0 L/yr |
TK Elevator
Sandvik Asia
FLSmidth
Outotec