Premium Employer

i

This company page is being actively managed by Mercedes-Benz Research and Development India Team. If you also belong to the team, you can get access from here

Filter interviews by

Mercedes-Benz Research and Development India Lead Design Engineer Interview Questions and Answers

Updated 16 Mar 2024

Mercedes-Benz Research and Development India Lead Design Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. How to decide section size
  • Ans. 

    Section size is decided based on structural requirements, loads, material properties, and design codes.

    • Consider the structural requirements and loads the section will be subjected to

    • Take into account the material properties such as strength and stiffness

    • Refer to design codes and standards for guidance on minimum section sizes

    • Perform structural analysis to optimize section size for efficiency

    • Consider factors such as cos

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be strong in basic material

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Apr 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Previous company work experience and strength and weekness
  • Q2. How many customers or projects handle
  • Ans. 

    I have handled over 20 projects and worked with numerous customers in my role as Lead Design Engineer.

    • Managed 20+ projects from start to finish

    • Collaborated with various customers to understand their needs and requirements

    • Implemented design solutions for different industries such as automotive, aerospace, and consumer electronics

  • Answered by AI
  • Q3. Tools used for system engineering etc..
  • Ans. 

    Tools commonly used for system engineering include requirements management tools, modeling and simulation software, and configuration management tools.

    • Requirements management tools help capture, track, and manage system requirements throughout the development process (e.g. IBM DOORS, Jama Connect)

    • Modeling and simulation software allows engineers to create virtual models of systems to analyze performance and behavior (e...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be positive and Don't tell lies.
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is interrupt method in kernel
  • Ans. 

    The interrupt method in the kernel is a mechanism used to handle hardware interrupts and prioritize their execution.

    • The interrupt method is a part of the kernel's interrupt handling mechanism.

    • It is responsible for handling hardware interrupts and determining their priority.

    • The interrupt method is typically implemented as a function or a set of functions in the kernel code.

    • It is used to manage and process interrupts fro...

  • Answered by AI

Skills evaluated in this interview

Lead Design Engineer Interview Questions & Answers

Cyient user image Shubham Gandharwar

posted on 25 May 2024

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before May 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. DETAILS REGARDING WIRING HARNESS
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Non technical questions,about work experience
  • Q2. About life,study,family and salary
Round 3 - Technical 

(2 Questions)

  • Q1. GD&t questions were asked present in drawing
  • Q2. About materials, casting, drawing

Interview Preparation Tips

Interview preparation tips for other job seekers - Good interview. 3peopled who took my interview.Good company atmosphere
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Aug 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Core technical on what you have done till now
Round 3 - Technical 

(1 Question)

  • Q1. Confidence and experience check
Round 4 - HR 

(1 Question)

  • Q1. General and personal background

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident enough on what you done/ experienc. Basics should be covered.
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
-

I applied via Approached by Company and was interviewed in Aug 2024. There were 2 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. Regarding Asking my previous Experience!
Round 2 - Technical 

(8 Questions)

  • Q1. What is Side member & cross member in biw?
  • Ans. 

    Side member and cross member are structural components in the Body in White (BIW) of a vehicle, providing support and rigidity.

    • Side members are longitudinal structural components that run along the sides of the vehicle, providing support and connecting various components.

    • Cross members are structural components that run across the width of the vehicle, connecting the side members and providing additional rigidity.

    • These ...

  • Answered by AI
  • Q2. What is Annotations, PMI?
  • Ans. 

    Annotations, PMI stands for Product Manufacturing Information, which includes dimensions, tolerances, materials, and other specifications on a technical drawing.

    • PMI is used to communicate important information about a product's design and manufacturing requirements.

    • Annotations are typically added to CAD drawings to provide clarity and guidance to manufacturers.

    • Examples of PMI include geometric dimensioning and toleranc...

  • Answered by AI
  • Q3. How to decide Bead & dart in biw member?
  • Ans. 

    Beads and darts are decided based on design requirements, manufacturing constraints, and structural considerations in BIW members.

    • Consider design requirements such as stiffness, strength, and crashworthiness.

    • Take into account manufacturing constraints like tooling limitations and cost.

    • Evaluate structural considerations such as load distribution and stress concentrations.

    • Examples: Beads are often used to increase stiffn...

  • Answered by AI
  • Q4. Which method are used for making biw mean manufacturing process?
  • Ans. 

    Various methods such as stamping, welding, and bonding are used for making BIW in manufacturing processes.

    • Stamping: involves pressing a sheet of metal into a die to create the desired shape

    • Welding: joining metal pieces together using heat or pressure

    • Bonding: using adhesives to attach metal components

    • Riveting: joining metal parts using rivets

    • Hydroforming: shaping metal using fluid pressure

  • Answered by AI
  • Q5. Diff b/w Hydroforming & forming?
  • Ans. 

    Hydroforming uses fluid pressure to shape metal, while forming involves shaping metal using mechanical force.

    • Hydroforming uses fluid pressure to shape metal into complex shapes

    • Forming involves shaping metal using mechanical force such as bending, stretching, or compressing

    • Hydroforming is often used in automotive industry for creating lightweight and strong components

    • Forming can be done through processes like stamping,

  • Answered by AI
  • Q6. GD& T use it?
  • Ans. 

    Yes, GD&T (Geometric Dimensioning and Tolerancing) is used in engineering to communicate design specifications.

    • GD&T is a symbolic language used on engineering drawings to specify the allowable variations in form, size, and orientation of features.

    • It helps ensure that parts fit together correctly and function properly.

    • GD&T can improve quality, reduce costs, and lead to more efficient manufacturing processes.

    • Examples of ...

  • Answered by AI
  • Q7. Benchmarking & Master section... In design?
  • Ans. 

    Benchmarking and master section are important in design for setting standards and improving performance.

    • Benchmarking involves comparing design processes, products, or performance against industry standards or competitors.

    • Master section refers to a standardized section of a design that serves as a reference point for consistency and quality.

    • Both benchmarking and master section help in setting benchmarks, identifying are...

  • Answered by AI
  • Q8. What is LMC & MMC (Least Material Condition & Max Material Condition) Explain with example?
  • Ans. 

    LMC & MMC are GD&T concepts used to define the extreme sizes of a part. LMC is the smallest size while MMC is the largest size.

    • LMC (Least Material Condition) is the condition where a part has the least amount of material, ensuring the smallest size possible.

    • MMC (Max Material Condition) is the condition where a part has the most amount of material, ensuring the largest size possible.

    • GD&T uses LMC and MMC to establish th...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Read biw, GD&T & manufacturing process?

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Hard
Process Duration
-
Result
Selected Selected

I applied via Campus Placement

Round 1 - Technical 

(2 Questions)

  • Q1. Basic of fea and cae
  • Q2. Question from simple components to critical component

I applied via Recruitment Consulltant and was interviewed in Jun 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Valve design calculation
  • Ans. 

    Valve design calculation involves determining the valve size, type, and material based on the fluid properties and system requirements.

    • Determine the flow rate and pressure drop across the valve

    • Select the appropriate valve type (e.g. globe, gate, ball) based on the application

    • Choose the valve material based on the fluid properties and compatibility

    • Calculate the valve size based on the flow rate and pressure drop

    • Consider...

  • Answered by AI
  • Q2. Introduction, types of valves, api 6d

Interview Preparation Tips

Interview preparation tips for other job seekers - Be on time
Read api 6d
Read npd process
Study about engineering calculation
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Questions related to projects
  • Q2. Questions related to favourite subject

Mercedes-Benz Research and Development India Interview FAQs

How many rounds are there in Mercedes-Benz Research and Development India Lead Design Engineer interview?
Mercedes-Benz Research and Development India interview process usually has 1 rounds. The most common rounds in the Mercedes-Benz Research and Development India interview process are Technical.

Tell us how to improve this page.

Mercedes-Benz Research and Development India Lead Design Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Join Mercedes-Benz Research and Development India The best or nothing.

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.4k Interviews
Accenture Interview Questions
3.8
 • 8.1k Interviews
Infosys Interview Questions
3.6
 • 7.5k Interviews
Wipro Interview Questions
3.7
 • 5.6k Interviews
Capgemini Interview Questions
3.7
 • 4.7k Interviews
Tata Motors Interview Questions
4.2
 • 995 Interviews
DXC Technology Interview Questions
3.7
 • 795 Interviews
Mphasis Interview Questions
3.4
 • 788 Interviews
NTT Data Interview Questions
3.9
 • 614 Interviews
View all
13% less than the average Lead Design Engineer Salary in India
View more details
Senior Engineer
1k salaries
unlock blur

₹10.3 L/yr - ₹32.4 L/yr

Senior Technical Lead
862 salaries
unlock blur

₹13 L/yr - ₹42.5 L/yr

Senior Consultant
748 salaries
unlock blur

₹9.2 L/yr - ₹28 L/yr

Principal Consultant
556 salaries
unlock blur

₹12 L/yr - ₹37.9 L/yr

Senior Software Engineer
517 salaries
unlock blur

₹10 L/yr - ₹32.2 L/yr

Explore more salaries
Compare Mercedes-Benz Research and Development India with

Bosch Global Software Technologies

3.9
Compare

Qualcomm

3.8
Compare

Tata Motors

4.2
Compare

BMW

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview