Upload Button Icon Add office photos

Maini Precision Products

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Maini Precision Products Senior Engineer Purchase Interview Questions and Answers

Updated 30 Dec 2021

Maini Precision Products Senior Engineer Purchase Interview Experiences

1 interview found

I applied via Walk-in and was interviewed in Nov 2021. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Technical issue

Interview Preparation Tips

Interview preparation tips for other job seekers - Technical knowledge related to job

Interview questions from similar companies

I applied via Walk-in and was interviewed in May 2019. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. I am sharing all questions in advice box..

Interview Preparation Tips

Interview preparation tips for other job seekers - Firstly asked me to tell something about myself.. He had some queried about my responsibilities for my family . After cleared those he asked about my working experience, safety related questions.
After that he started to ask me some questions from design of machine which i could not make him satisfy with my answer
Then he asked about my favourite topic during diploma engineering.. as i said him IC engine, steam engine, heat transfer, pump he started to ask questions from there like what is engine, types, d/f among them , volumetric efficiency, stroke length, compression ratio, turbocharger, pump working principle etc..
I attended those all
After that he gave some info about site environment, and asked to me that i m ok with it or not..
That's it..
Be confident and be honest are the key to crack L&T interview..
Good luck
Thank you

I was interviewed in May 2019.

Interview Questionnaire 

2 Questions

  • Q1. How many types off bricks are uses in construction..
  • Ans. 

    There are several types of bricks used in construction, including clay bricks, concrete bricks, and fire bricks.

    • Clay bricks are the most common type of brick used in construction.

    • Concrete bricks are made from cement, sand, and water and are used for their strength and durability.

    • Fire bricks are designed to withstand high temperatures and are used in fireplaces, ovens, and kilns.

    • Other types of bricks include sand-lime b...

  • Answered by AI
  • Q2. Now can control the many critical conditions on site.

I applied via Campus Placement and was interviewed before Jan 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Mechanical questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview er good
Simple question asked me

I applied via Walk-in and was interviewed in Sep 2021. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. What is your nam?
  • Q2. What is your qualifications

Interview Preparation Tips

Interview preparation tips for other job seekers - Iam present working in company but interview is video call
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Jan 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(3 Questions)

  • Q1. GD&T PURPOSE Questions
  • Q2. Cmm OPERATOR Questions
  • Q3. Cmm software purpose
  • Ans. 

    CMM software is used to control and operate coordinate measuring machines.

    • CMM software is used to create measurement programs for coordinate measuring machines.

    • It allows for precise measurement of objects and parts.

    • CMM software can analyze data and generate reports.

    • Examples of CMM software include PC-DMIS, Calypso, and Metrolog.

  • Answered by AI
Round 3 - HR 

(3 Questions)

  • Q1. Previous working information
  • Q2. Family introductions Question
  • Q3. Salary purpose discussed

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview also good Condition taken .all things are good.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected
Round 1 - HR 

(1 Question)

  • Q1. Asking about based on current working & previous work experience, salary expectation.
Round 2 - Technical 

(1 Question)

  • Q1. Question based on experience, engine fault, troubleshooting explain, etc.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
No response

I applied via Referral and was interviewed in Sep 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. WHAT ARE TRANSFORMWERS
  • Ans. 

    Transformers are devices that transfer electrical energy between two or more circuits through electromagnetic induction.

    • Transformers consist of primary and secondary coils wound around a core made of ferromagnetic material.

    • They work on the principle of electromagnetic induction, where changing current in the primary coil induces a voltage in the secondary coil.

    • Transformers are used to step up or step down voltage level...

  • Answered by AI
  • Q2. WHAT ARE MICROCONTROLLERS
  • Ans. 

    Microcontrollers are small computers on a single integrated circuit used to control electronic devices.

    • Microcontrollers are often used in embedded systems for specific tasks.

    • They contain a CPU, memory, and input/output peripherals on a single chip.

    • Examples include Arduino, Raspberry Pi, and PIC microcontrollers.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - NA
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

He also aked simple and basic question for exam

Round 2 - Group Discussion 

He asked me what is your favourite subject.

Interview Preparation Tips

Interview preparation tips for other job seekers - Larsen and toubro interview and exam is so simple. But clear your basic for each subject and crack
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Jun 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - HR 

(2 Questions)

  • Q1. Technical questions, thermal application, theory of machine,
  • Q2. Any thermal application related questions.
Round 3 - HR 

(3 Questions)

  • Q1. RAC and theory of machine
  • Ans. 

    RAC stands for Refrigeration and Air Conditioning, while Theory of Machines deals with the study of machines and their mechanisms.

    • RAC involves the study of refrigeration cycles, air conditioning systems, and heat transfer processes.

    • Theory of Machines focuses on the design, analysis, and operation of machines like engines, turbines, and gears.

    • Understanding RAC is essential for designing efficient cooling systems, while ...

  • Answered by AI
  • Q2. RAC and theory of machine som
  • Ans. 

    RAC stands for Refrigeration and Air Conditioning. Theory of Machines is a branch of mechanical engineering that deals with the study of machines.

    • RAC involves the study of refrigeration cycles, air conditioning systems, and heat transfer processes.

    • Theory of Machines focuses on the design, analysis, and operation of machines like engines, gears, and mechanisms.

    • Understanding RAC is important for designing efficient cooli...

  • Answered by AI
  • Q3. Basic Tharmal , machine design

Interview Preparation Tips

Topics to prepare for Larsen & Toubro Limited Junior Engineer interview:
  • Tharmal application
  • Theory of machine
  • Rafegiration and condensed
Interview preparation tips for other job seekers - Good communication skills.
Contribute & help others!
anonymous
You can choose to be anonymous

Maini Precision Products Interview FAQs

How to prepare for Maini Precision Products Senior Engineer Purchase interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Maini Precision Products. The most common topics and skills that interviewers at Maini Precision Products expect are SAP, Analytical skills, Communication Skills, Excel and Manufacturing Process.

Recently Viewed

INTERVIEWS

Stellar Value Chain Solutions

No Interviews

INTERVIEWS

Stellar Value Chain Solutions

No Interviews

SALARIES

Stellar Value Chain Solutions

INTERVIEWS

Stellar Value Chain Solutions

No Interviews

INTERVIEWS

Stellar Value Chain Solutions

No Interviews

INTERVIEWS

Stellar Value Chain Solutions

No Interviews

INTERVIEWS

Larsen & Toubro Limited

No Interviews

INTERVIEWS

Stellar Value Chain Solutions

No Interviews

INTERVIEWS

Stellar Value Chain Solutions

No Interviews

INTERVIEWS

Stellar Value Chain Solutions

No Interviews

Tell us how to improve this page.

Interview Questions from Similar Companies

Krishna Maruti Interview Questions
4.0
 • 92 Interviews
Delphi TVS Interview Questions
3.9
 • 83 Interviews
Hyundai Mobis Interview Questions
3.8
 • 63 Interviews
Faurecia Interview Questions
3.9
 • 59 Interviews
View all
Maini Precision Products Senior Engineer Purchase Salary
based on 12 salaries
₹4 L/yr - ₹7 L/yr
10% less than the average Senior Engineer Purchase Salary in India
View more details
Junior Engineer
464 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
147 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
108 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
92 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
69 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Maini Precision Products with

Bharat Forge

3.9
Compare

Godrej Aerospace

4.0
Compare

Tata Advanced Systems

3.7
Compare

Hindustan Aeronautics

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent