Add office photos
i
Mahindra & Mahindra
CompareProud winner of ABECA 2024 - AmbitionBox Employee Choice Awards
Filter interviews by
Mahindra & Mahindra Civil Site Engineer Interview Questions and Answers
Mahindra & Mahindra Civil Site Engineer Interview Experiences
1 interview found
Brijesh kumar
Selected
I applied via Walk-in and was interviewed in Sep 2023. There were 2 interview rounds.
(3 Questions)
- Q1. Calum and Bram any oueastion
- Q2. Footing and found ation
- Q3. Cm of mm or metery
Interview Preparation Tips
- Civil Engineering
- Construction
Interview questions from similar companies
Anonymous
Selected
I applied via Naukri.com and was interviewed in Feb 2023. There were 2 interview rounds.
(3 Questions)
- Q1. What to look for first when looking at a drawing?
- Ans.
Look for key details such as dimensions, scale, title block, notes, and symbols.
Check the title block for project information, scale, and revision number.
Review the dimensions to understand the size and layout of the project.
Look for notes that provide important information or instructions.
Identify symbols that represent different elements or materials on the drawing.
Pay attention to any legends or key plans that expla
- Q2. What to look for first to do any work?
- Q3. If any work is completed, what should be observed in it?
- Ans.
Observation of completed work is crucial to ensure quality and compliance with specifications.
Check if the work meets the design specifications
Inspect for any defects or deficiencies
Ensure proper materials and construction techniques were used
Verify that all safety standards were followed
Document any deviations or changes made during construction
Interview Preparation Tips
I applied via Referral and was interviewed before Apr 2020. There were 4 interview rounds.
Interview Questionnaire
3 Questions
- Q1. Density of steel
- Ans.
The density of steel is approximately 7.85 grams per cubic centimeter.
The density of steel is a measure of how much mass is contained in a given volume of steel.
It is commonly expressed in grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³).
The density of steel can vary depending on the specific type and composition of the steel alloy.
For example, the density of carbon steel is generally around 7.85...
- Q2. Formula to find Unit weight of steel
- Ans.
Formula to find unit weight of steel
Unit weight of steel = Density of steel x Volume of steel
Density of steel = 7850 kg/m³
Volume of steel = Area of steel x Length of steel
Example: Unit weight of a 10mm diameter steel bar of length 1 meter = 0.785 x 1 x 7850 = 6162.25 grams
Example: Unit weight of a 12mm diameter steel bar of length 12 meters = 0.888 x 12 x 7850 = 835584 grams
- Q3. Frog size of brick
- Ans.
The frog size of a brick refers to the distance between the two parallel sides of a brick.
The frog size is typically measured in millimeters.
It is important for proper bricklaying and mortar application.
The size of the frog can vary depending on the type and size of the brick.
For example, a standard brick may have a frog size of around 10-15mm.
Some bricks may not have a frog at all.
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed in Feb 2023. There were 2 interview rounds.
(3 Questions)
- Q1. What to look for first when looking at a drawing?
- Ans.
Look for key details such as dimensions, scale, title block, notes, and symbols.
Check the title block for project information, scale, and revision number.
Review the dimensions to understand the size and layout of the project.
Look for notes that provide important information or instructions.
Identify symbols that represent different elements or materials on the drawing.
Pay attention to any legends or key plans that expla
- Q2. What to look for first to do any work?
- Q3. If any work is completed, what should be observed in it?
- Ans.
Observation of completed work is crucial to ensure quality and compliance with specifications.
Check if the work meets the design specifications
Inspect for any defects or deficiencies
Ensure proper materials and construction techniques were used
Verify that all safety standards were followed
Document any deviations or changes made during construction
Interview Preparation Tips
I applied via Naukri.com and was interviewed in Oct 2022. There were 2 interview rounds.
(3 Questions)
- Q1. Electronics and communication skills
- Q2. Electronic and communication skills related
- Q3. Electronic components
Interview Preparation Tips
(2 Questions)
- Q1. Environmental plants are required to be planted
- Ans. Sewerage effluent is required to be treated up to trussary level
- Q2. Rainy well are required to be dug in the unit campus to avoid water logging
- Ans. Under ground rainwater storage reservoirs are required to be constructed and use that water for irrigation to plants during summer
Interview Preparation Tips
(2 Questions)
- Q1. Tell about yourself and your ambitions
- Q2. Why are you choosing this job
Make sure to learn according to your subject
Interview Preparation Tips
I applied via Referral and was interviewed before Apr 2020. There were 4 interview rounds.
Interview Questionnaire
3 Questions
- Q1. Density of steel
- Ans.
The density of steel is approximately 7.85 grams per cubic centimeter.
The density of steel is a measure of how much mass is contained in a given volume of steel.
It is commonly expressed in grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³).
The density of steel can vary depending on the specific type and composition of the steel alloy.
For example, the density of carbon steel is generally around 7.85...
- Q2. Formula to find Unit weight of steel
- Ans.
Formula to find unit weight of steel
Unit weight of steel = Density of steel x Volume of steel
Density of steel = 7850 kg/m³
Volume of steel = Area of steel x Length of steel
Example: Unit weight of a 10mm diameter steel bar of length 1 meter = 0.785 x 1 x 7850 = 6162.25 grams
Example: Unit weight of a 12mm diameter steel bar of length 12 meters = 0.888 x 12 x 7850 = 835584 grams
- Q3. Frog size of brick
- Ans.
The frog size of a brick refers to the distance between the two parallel sides of a brick.
The frog size is typically measured in millimeters.
It is important for proper bricklaying and mortar application.
The size of the frog can vary depending on the type and size of the brick.
For example, a standard brick may have a frog size of around 10-15mm.
Some bricks may not have a frog at all.
Interview Preparation Tips
I was interviewed in May 2019.
Interview Questionnaire
2 Questions
- Q1. HR basic questions
- Q2. Workability and other basic things related to projects
Mahindra & Mahindra Interview FAQs
Tell us how to improve this page.
Mahindra & Mahindra Interviews By Designations
- Mahindra & Mahindra Deputy Manager Interview Questions
- Mahindra & Mahindra Assistant Manager Interview Questions
- Mahindra & Mahindra Quality Engineer Interview Questions
- Mahindra & Mahindra Diploma Trainee Engineer Interview Questions
- Mahindra & Mahindra Team Lead Interview Questions
- Mahindra & Mahindra Mechanical Engineer Interview Questions
- Mahindra & Mahindra Production Engineer Interview Questions
- Mahindra & Mahindra Senior Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Civil Site Supervisor Interview Questions
- Civil Engineer Interview Questions
- Senior Civil Site Engineer Interview Questions
- Junior Engineer Civil Interview Questions
- Senior Civil Engineer Interview Questions
- Site Engineer Interview Questions
- Civil Foreman Interview Questions
- Civil Supervisor Interview Questions
- Show more
People are getting interviews through
Interview Questions from Similar Companies
Fast track your campus placements
Mahindra & Mahindra Civil Site Engineer Reviews and Ratings
based on 2 reviews
Rating in categories
|
Deputy Manager
2.8k
salaries
|  ₹5.2 L/yr - ₹18.2 L/yr |
|
Assistant Manager
2.3k
salaries
| ₹3 L/yr - ₹12.8 L/yr |
|
Manager
1.5k
salaries
| ₹10 L/yr - ₹30 L/yr |
|
Senior Engineer
932
salaries
| ₹6.5 L/yr - ₹17 L/yr |
|
Team Lead
775
salaries
| ₹1.5 L/yr - ₹9.3 L/yr |
Tata Motors
Maruti Suzuki
Ashok Leyland
Hero MotoCorp
Calculate your in-hand salary
- Home >
- Interviews >
- Mahindra & Mahindra Interview Questions >
- Mahindra & Mahindra Civil Site Engineer Interview Questions
