i
Filter interviews by
I applied via Referral and was interviewed in Sep 2021. There was 1 interview round.
Major bridges are larger and carry more traffic than minor bridges.
Major bridges are typically longer and wider than minor bridges.
Major bridges are designed to carry heavy loads and high volumes of traffic.
Minor bridges are usually shorter and narrower, and they carry lighter loads and lower volumes of traffic.
Major bridges often span large bodies of water or deep valleys, while minor bridges may span small streams or...
The minimum socket length for end bearing pile depends on the soil conditions and load requirements.
The socket length should be sufficient to transfer the load from the pile to the competent stratum below.
It is determined based on the soil investigation report and design calculations.
In cohesive soils, the socket length is typically 1.5 to 2 times the diameter of the pile.
In non-cohesive soils, the socket length may va...
Post tensioning and pre tensioning are methods used in prestressed concrete (PSC) girders to enhance their strength and durability.
Post tensioning involves applying tension to the concrete after it has hardened, using steel tendons or cables.
Pre tensioning involves applying tension to the tendons or cables before pouring the concrete, which transfers the force to the concrete when it hardens.
Post tensioning allows for ...
I applied via Naukri.com and was interviewed in Mar 2022. There were 2 interview rounds.
The question is unclear and incomplete. Please provide more information.
Please clarify the question.
Provide more context about the bridge and its alignment.
Are you asking about the alignment of piers in a specific type of bridge?
Without more information, it is impossible to answer this question.
Head square of a bridge is used to support the weight of the bridge deck and transfer it to the piers.
Head square is a reinforced concrete beam that connects the bridge deck to the piers.
It helps to distribute the weight of the bridge deck evenly to the piers.
The placing method of concrete slab and pier depends on the design of the bridge and the site conditions.
The concrete slab is usually cast in place on top of the ...
The quantity of concrete consumed for one footing depends on the size and depth of the footing.
The size and depth of the footing determine the volume of concrete needed.
The type of soil and load capacity also affect the quantity of concrete.
A typical residential footing may require 0.5 to 1 cubic yard of concrete.
A larger commercial footing may require several cubic yards of concrete.
Metal and sand cement are valuable materials in bridge engineering.
Metal is used for structural support and reinforcement in bridges.
Sand cement is used as a binding agent in concrete for bridge construction.
Metal and sand cement work together to create strong and durable bridges.
Metal can also be used for bridge decking and railing.
Sand cement can be mixed with other materials to create different types of concrete for
The difficulties of the base of pier can be addressed through proper design and construction techniques.
Conduct thorough soil investigation to determine the soil type and bearing capacity
Design the foundation based on the soil investigation results
Use appropriate construction techniques such as pile driving or excavation
Regularly monitor and maintain the pier foundation to ensure stability
Consider using innovative solu...
L. N. Malviya Infra Projects Group interview questions for popular designations
I applied via Referral and was interviewed before Jan 2022. There were 2 interview rounds.
Soil bearing can be improved by various methods.
Compaction of soil
Adding stabilizers like lime, cement, or fly ash
Preloading the soil with a heavy load for a period of time
Improving drainage to prevent water accumulation
Using geotextiles or geogrids to reinforce the soil
Modifying the soil with chemical agents like sodium silicate or calcium chloride
Soil stabilizer is a chemical or mechanical additive used to improve the properties of soil.
Soil stabilizers can improve soil strength, durability, and resistance to erosion.
Chemical stabilizers include lime, cement, and asphalt emulsions.
Mechanical stabilizers include geotextiles and grids.
Soil stabilizers are commonly used in road construction and building foundations.
Get interview-ready with Top L. N. Malviya Infra Projects Group Interview Questions
I applied via Other and was interviewed in Feb 2021. There was 1 interview round.
I applied via Approached by company and was interviewed in Jul 2021. There were 2 interview rounds.
I applied via Referral and was interviewed before Jan 2021. There were 3 interview rounds.
Quality control tests are conducted on soil aggregates, cement, and concrete to ensure their compliance with quality standards.
Soil aggregates are tested for particle size distribution, moisture content, and compaction characteristics.
Cement is tested for fineness, setting time, compressive strength, and chemical composition.
Concrete is tested for slump, compressive strength, air content, and durability.
Various laborat...
I applied via Company Website and was interviewed before Jun 2021. There was 1 interview round.
Mixed design of concrete involves combining different types of aggregates, cement, water, and admixtures to achieve desired properties.
The mix design process involves determining the proportions of each component based on the desired strength, workability, and durability of the concrete.
Different types of aggregates, such as gravel, sand, and crushed stone, can be used to achieve different properties.
Admixtures, such a...
Top trending discussions
Interview experience
based on 344 reviews
Rating in categories
Field Engineer
90
salaries
| ₹2 L/yr - ₹4.5 L/yr |
Assistant Bridge Engineer
55
salaries
| ₹3 L/yr - ₹8 L/yr |
Assistant Highway Engineer
52
salaries
| ₹3.2 L/yr - ₹7.2 L/yr |
Road Engineer
33
salaries
| ₹3 L/yr - ₹4 L/yr |
Lab Technician
25
salaries
| ₹1.7 L/yr - ₹4.3 L/yr |
GMR Group
Larsen & Toubro Limited
Reliance Infrastructure
Tata Projects