Upload Button Icon Add office photos

Filter interviews by

L&T Construction Production Graduate Engineer Trainee Interview Questions and Answers

Updated 26 May 2024

L&T Construction Production Graduate Engineer Trainee Interview Experiences

3 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
No response

I applied via campus placement at National Institute of Engineering (NIE) and was interviewed before May 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

It's include English grammar, Aptitude problems

Round 2 - Technical 

(3 Questions)

  • Q1. It's virtual interview
  • Q2. SOM GD&T AUTOMOTIVE DESIGN
  • Q3. Like Stress strain concepts
Round 3 - HR 

(1 Question)

  • Q1. Background, will u accept these offer
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

It was easy and moderate

Round 2 - Technical 

(2 Questions)

  • Q1. It was moderat and easy
  • Q2. About basics of civil engineering and structural engineering

Production Graduate Engineer Trainee Interview Questions Asked at Other Companies

Q1. PRINCIPLE ON WHICH HEAT TRANSFER WORKS (ALL PHASES)
asked in Veolia
Q2. 1-what is your favorite topic 2-third law of thermodynamics 3- mo ... read more
asked in Wood Group
Q3. Which flow system is more effective: countercurrent flow or concu ... read more
Q4. METHODS TO FIND NUMBER OF PLATES IN DISTILLATION COLUMN
Q5. What are the details of the manufacturing process of internal com ... read more
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via campus placement at National Institute of Engineering (NIE) and was interviewed in Nov 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Asked about project
Round 2 - HR 

(1 Question)

  • Q1. Asked about relocation

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Nov 2024. There was 1 interview round.

Round 1 - Technical 

(8 Questions)

  • Q1. Tell me about yourself
  • Ans. 

    I am a recent graduate with a degree in Production Engineering, eager to learn and grow in the field.

    • Recent graduate with a degree in Production Engineering

    • Passionate about learning and growing in the field

    • Strong problem-solving skills

    • Experience with CAD software and production processes

  • Answered by AI
  • Q2. Tell about your projects
  • Ans. 

    I have worked on various projects including designing a solar-powered irrigation system and developing a smart home automation system.

    • Designed a solar-powered irrigation system to optimize water usage in agriculture

    • Developed a smart home automation system using IoT technology

    • Collaborated with a team to create a mobile app for tracking fitness goals

  • Answered by AI
  • Q3. Questions about projects such as purpose, applications
  • Q4. Laws of thermodynamics
  • Ans. 

    The fundamental laws of thermodynamics are principles that govern energy transfer and transformation in physical systems.

    • First Law: Energy cannot be created or destroyed, only transferred or converted. It is also known as the law of conservation of energy.

    • Second Law: The entropy of an isolated system always increases over time. It is impossible to convert heat completely into work with 100% efficiency.

    • Third Law: As a s...

  • Answered by AI
  • Q5. Modes of heat transfer
  • Ans. 

    Modes of heat transfer include conduction, convection, and radiation.

    • Conduction: Heat transfer through direct contact between particles. Example: Touching a hot pan.

    • Convection: Heat transfer through the movement of fluids. Example: Boiling water in a pot.

    • Radiation: Heat transfer through electromagnetic waves. Example: Feeling the warmth of the sun.

  • Answered by AI
  • Q6. Entropy, enthalpy
  • Q7. How are your interests align with L&T
  • Ans. 

    My interests align with L&T as I have a passion for engineering, innovation, and problem-solving.

    • I have a strong background in engineering and a keen interest in applying technical knowledge to real-world projects.

    • I am enthusiastic about innovation and constantly seek out new technologies and processes to improve efficiency and quality.

    • I enjoy tackling complex problems and finding creative solutions, which aligns w...

  • Answered by AI
  • Q8. Are you ready to relocate
  • Ans. 

    Yes, I am open to relocating for the right opportunity.

    • I am willing to relocate for the right job opportunity that aligns with my career goals.

    • I am flexible and adaptable to new environments and challenges.

    • I understand that relocation may be necessary for career growth and development.

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Larsen & Toubro Limited Production Graduate Engineer Trainee interview:
  • Heat transfer
  • Thermodynamics
  • Refrigeration and Air conditioni
  • Thermal Engineering
  • Automobile Engineering
  • Strength of materials
  • Material Science and Metallurgy
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via campus placement at Indira Gandhi Delhi Technical University for Women, Delhi and was interviewed in Dec 2023. There were 2 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. I want to know about the company
  • Q2. Stress related content
  • Q3. Piping layout related content
Round 2 - Group Discussion 

Renewable resources speak atleast 20 minutes

Interview Preparation Tips

Topics to prepare for McDermott International Production Graduate Engineer Trainee interview:
  • Stress Analysis
Interview preparation tips for other job seekers - Vocal about the company and put forward your ability
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Jun 2024. There were 3 interview rounds.

Round 1 - Group Discussion 

A common topic was presented, and everyone had to share their opinions.

Round 2 - One-on-one 

(2 Questions)

  • Q1. Can you provide details about the projects you have completed?
  • Ans. 

    I have completed various projects including a market research analysis, a social media campaign, and a website redesign.

    • Market research analysis for a new product launch

    • Social media campaign to increase brand awareness

    • Website redesign to improve user experience

  • Answered by AI
  • Q2. Technical Questions from branch wise
Round 3 - HR 

(2 Questions)

  • Q1. Why you want to join Atkins Realis
  • Ans. 

    I want to join Atkins Realis because of their reputation for innovative projects and commitment to sustainability.

    • Atkins Realis is known for their cutting-edge projects in engineering and design

    • I am impressed by their focus on sustainability and environmental responsibility

    • I believe working at Atkins Realis will provide me with valuable experience and opportunities for growth

  • Answered by AI
  • Q2. Tell me about something which is not there in your resume
  • Ans. 

    I have a passion for photography and have won several awards for my work.

    • I have been practicing photography as a hobby for the past 5 years

    • I have won awards in local photography competitions for my landscape and portrait photography

    • I have a portfolio of my work that showcases my skills and creativity

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - The selection process include A online Assessment, after Qualifying online Assessment they will call you for an offline process in New Delhi . Where you will have to go through GD followed by Technical Interview and HR Round . Each round is a Eliminating round
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in May 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(5 Questions)

  • Q1. BBS of Stirups,
  • Ans. 

    BBS of Stirrups is a reinforcement detailing technique used in construction.

    • BBS stands for Bar Bending Schedule.

    • Stirrups are used to provide lateral support to vertical reinforcement bars in concrete structures.

    • BBS of Stirrups involves determining the quantity, shape, and dimensions of stirrups required in a structure.

    • It helps in ensuring the structural integrity and strength of the concrete elements.

    • Example: BBS of St...

  • Answered by AI
  • Q2. Conscrete strength in 7 days and 28 days
  • Ans. 

    Concrete strength increases significantly from 7 days to 28 days.

    • Concrete strength is measured in terms of compressive strength.

    • At 7 days, concrete typically reaches about 70-80% of its 28-day strength.

    • Factors like cement type, water-cement ratio, curing conditions, and aggregate properties affect the strength development.

    • Higher strength concrete is often required for structural applications.

    • Testing concrete strength a...

  • Answered by AI
  • Q3. Clear covers used in all items
  • Ans. 

    Clear covers are used in all items.

    • Clear covers provide visibility and protection to the items.

    • They are commonly used in electronic devices, such as smartphones and tablets.

    • Clear covers are also used in food packaging to showcase the product.

    • In the automotive industry, clear covers are used for headlights and taillights.

    • They can be made of materials like glass, plastic, or acrylic.

  • Answered by AI
  • Q4. Development length in compression member
  • Ans. 

    Development length in compression member is the length of reinforcement required to transfer the stress from the steel to the concrete.

    • Development length is determined by factors such as the strength of the concrete, the diameter of the reinforcement, and the bond strength between the steel and concrete.

    • It is important to ensure that the development length is sufficient to prevent premature failure or slippage of the r...

  • Answered by AI
  • Q5. Find cutting length oc a rectangular stirrups , numerical
  • Ans. 

    The cutting length of a rectangular stirrup is calculated based on the dimensions of the stirrup and the bending requirements.

    • The cutting length is determined by adding the lengths of all sides of the stirrup and multiplying by the number of bends.

    • For example, if the stirrup has sides measuring 10 cm, 15 cm, and 10 cm, and it requires 2 bends, the cutting length would be (10 + 15 + 10) * 2 = 70 cm.

    • The cutting length is...

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Basic, salary discussion nothing else

Interview Preparation Tips

Interview preparation tips for other job seekers - clear your basics
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-

I applied via Approached by Company

Round 1 - HR 

(1 Question)

  • Q1. About yourself?
Round 2 - Group Discussion 

One civil topic given to talk

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via campus placement at Meghnad Saha Institute of Technology, Kolkata and was interviewed in Aug 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(4 Questions)

  • Q1. Draw BMD & SFD of a Simply Supported Beam shown to my screen. Draw it & show that on screen.
  • Ans. 

    The candidate is asked to draw the BMD & SFD of a Simply Supported Beam shown on the screen.

    • Identify the support conditions of the beam (simply supported in this case)

    • Determine the loads acting on the beam and their positions

    • Calculate the reactions at the supports

    • Draw the Bending Moment Diagram (BMD) and Shear Force Diagram (SFD) based on the calculated values

    • Label the diagrams with appropriate values and units

  • Answered by AI
  • Q2. What are the values of Compressive & Tensile Shear Stress on a Singly Reinforced Beam in LSM method?
  • Ans. 

    Compressive shear stress is zero while tensile shear stress is equal to the shear force divided by the cross-sectional area of the beam.

    • Compressive shear stress is zero in a singly reinforced beam according to the Limit State Method (LSM).

    • Tensile shear stress is calculated by dividing the shear force by the cross-sectional area of the beam.

    • For example, if the shear force acting on the beam is 10 kN and the cross-sectio...

  • Answered by AI
  • Q3. Some other civil engineering questions.
  • Q4. Introduce Yourself. This is 1st Question.

Interview Preparation Tips

Interview preparation tips for other job seekers - Moderate level interview.Video Interview.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
-
Result
Selected Selected

I applied via Campus Placement and was interviewed in Sep 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

130 question have to solve in 120 minutes, 30Q from quant , English, reasoning each and 40 Q from core

Round 2 - One-on-one 

(1 Question)

  • Q1. So basically this was Included HR+TECHNICAL , . introduce yourself . . Tell me about your internship ( I have done in iocl) . . Working principle of powerplant their component and functions ( before inter...

Interview Preparation Tips

Interview preparation tips for other job seekers - They will mainly ask questions from INTERNSHIP and PROJECT, and try to prepare basic questions from each topic.

L&T Construction Interview FAQs

How many rounds are there in L&T Construction Production Graduate Engineer Trainee interview?
L&T Construction interview process usually has 2-3 rounds. The most common rounds in the L&T Construction interview process are Technical, Aptitude Test and HR.
What are the top questions asked in L&T Construction Production Graduate Engineer Trainee interview?

Some of the top questions asked at the L&T Construction Production Graduate Engineer Trainee interview -

  1. About basics of civil engineering and structural engineer...read more
  2. SOM GD&T AUTOMOTIVE DES...read more
  3. It's virtual interv...read more

Tell us how to improve this page.

L&T Construction Production Graduate Engineer Trainee Interview Process

based on 3 interviews

Interview experience

4.7
  
Excellent
View more

Interview Questions from Similar Companies

Tata Projects Interview Questions
4.2
 • 412 Interviews
Dilip Buildcon Interview Questions
4.0
 • 139 Interviews
G R Infraprojects Interview Questions
4.1
 • 130 Interviews
AtkinsRealis Interview Questions
4.0
 • 84 Interviews
GMR Group Interview Questions
4.1
 • 76 Interviews
View all
L&T Construction Production Graduate Engineer Trainee Salary
based on 6 salaries
₹6 L/yr - ₹6.5 L/yr
12% less than the average Production Graduate Engineer Trainee Salary in India
View more details

L&T Construction Production Graduate Engineer Trainee Reviews and Ratings

based on 3 reviews

4.2/5

Rating in categories

4.2

Skill development

4.2

Work-life balance

4.2

Salary

4.2

Job security

4.2

Company culture

4.2

Promotions

4.2

Work satisfaction

Explore 3 Reviews and Ratings
Assistant Manager
1.1k salaries
unlock blur

₹6 L/yr - ₹18.2 L/yr

Senior Engineer
720 salaries
unlock blur

₹3 L/yr - ₹12 L/yr

Assistant Construction Manager
527 salaries
unlock blur

₹5.4 L/yr - ₹17.5 L/yr

Civil Site Engineer
380 salaries
unlock blur

₹1.2 L/yr - ₹8.4 L/yr

Assistant Engineering Manager
324 salaries
unlock blur

₹5 L/yr - ₹17 L/yr

Explore more salaries
Compare L&T Construction with

Tata Projects

4.2
Compare

Shapoorji Pallonji Group

4.1
Compare

Hindustan Construction Company

4.2
Compare

GAMMON INDIA

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview