Add office photos
Filter interviews by
Kellogg Brown and Root Interview Questions, Process, and Tips for Experienced
Top Kellogg Brown and Root Interview Questions and Answers for Experienced
- Q1. How you will decide nozzle orientationasked in Senior Piping Designer interview
- Q2. Diffrence bewteen ASME sec 8 div 1 and div 2asked in Associate Technical Professional interview
- Q3. Hands on experience in Indirect procurementasked in Senior Executive Procurement interview
Kellogg Brown and Root Interview Experiences for Experienced
14 interviews found
SUBHA.M
Selected
I applied via Company Website and was interviewed in Dec 2023. There were 2 interview rounds.
(4 Questions)
- Q1. Self introduction, good communication
- Q2. Team leadership
- Q3. Hard working person.
- Q4. I would like this job as growth and develop a knowledge and improve myself and I intersected in software Technology.
(1 Question)
- Q1. Working experience
Auto CAD Engineer Interview Questions asked at other Companies
nagappa gani
Selected
I applied via Walk-in and was interviewed in Feb 2024. There was 1 interview round.
(2 Questions)
- Q1. How you will set rack width
- Ans.
The rack width is set based on the size and layout of the piping components to ensure proper spacing and accessibility for maintenance.
Consider the size and layout of piping components to determine the required width for the rack
Ensure there is enough space for maintenance activities such as valve operation and equipment replacement
Take into account any safety regulations or guidelines regarding spacing between compone...
- Q2. How you will decide nozzle orientation
- Ans.
Nozzle orientation is decided based on process requirements, equipment layout, piping stress analysis, and safety considerations.
Consider process requirements such as flow direction and pressure drop
Align with equipment layout to ensure proper connection and accessibility
Analyze piping stress to avoid excessive loads on the nozzle
Ensure safety by avoiding interference with other equipment or structures
Consult with proc...
Senior Piping Designer Interview Questions asked at other Companies
(2 Questions)
- Q1. Basic ITAM questions, what CMBD you use? How do you ensure all records are up to date?
- Q2. Problems encountered?
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed in Aug 2023. There were 2 interview rounds.
Online multiple choice questions both technical and non technical
(2 Questions)
- Q1. Related to Fluid mechanics
- Q2. Related to thermodynamics
Interview Preparation Tips
- Mass Transfer
- Fluid Mechanics
- Process Control Instrumentation
Associate Technical Professional Interview Questions asked at other Companies
Kellogg Brown and Root interview questions for popular designations
Selected
I applied via Walk-in and was interviewed in Jan 2024. There was 1 interview round.
(1 Question)
- Q1. Basics about aspen and flarenet
Lab Technician Interview Questions asked at other Companies
Selected
I applied via Recruitment Consulltant and was interviewed in Dec 2023. There was 1 interview round.
(1 Question)
- Q1. Bases on experience specified in the CV
Interview Preparation Tips
Principal Engineer Interview Questions asked at other Companies
Jobs at Kellogg Brown and Root
(1 Question)
- Q1. Why your want to change your career?
The booming nowadays in KSA
Project Director Interview Questions asked at other Companies
I applied via LinkedIn and was interviewed in Apr 2022. There were 2 interview rounds.
(3 Questions)
- Q1. Diffrence bewteen ASME sec 8 div 1 and div 2
- Ans.
ASME Sec 8 Div 1 is for designing pressure vessels for general applications while Div 2 is for designing pressure vessels for specific applications.
ASME Sec 8 Div 1 is based on design by rule approach while Div 2 is based on design by analysis approach.
Div 1 has more conservative design rules while Div 2 allows for more flexibility in design.
Div 2 requires more detailed analysis and testing than Div 1.
Div 2 is used for...
- Q2. Vessel design parameters
- Ans.
Vessel design parameters include size, shape, material, and intended use.
Size: determines capacity and stability
Shape: affects hydrodynamics and maneuverability
Material: impacts strength, weight, and corrosion resistance
Intended use: dictates features such as cargo hold, propulsion, and navigation systems
- Q3. Past projects and experience
Interview Preparation Tips
Associate Technical Professional Interview Questions asked at other Companies
sanchit tandon
Selected
I applied via Recruitment Consulltant and was interviewed before Oct 2022. There were 3 interview rounds.
(1 Question)
- Q1. Hands on experience in Indirect procurement
- Ans.
Extensive hands-on experience in managing indirect procurement activities including sourcing, vendor management, and contract negotiation.
Managed end-to-end procurement process for indirect categories such as IT services, marketing, and facilities management
Negotiated contracts with vendors to ensure cost savings and quality standards are met
Implemented strategic sourcing initiatives to optimize supplier relationships ...
(1 Question)
- Q1. Salary discussion
Senior Executive Procurement Interview Questions asked at other Companies
I applied via Referral and was interviewed in Dec 2020. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. Job Experience, Project Experience, Reason for Job Change, Domain Knowledge, KPI's mentioned on the CV
Interview Preparation Tips
I faced the interview without any expectation on the outcome as I was still employed comfortably with a reputed multi-national at the time of this interview. I have prepared myself thoroughly on the concepts related to my domain as well as the point to point explanation of the KPI's stated in my CV if asked for explanation which helped a lot. It was suggested by one of my friends to be prepared for STAR Technique(Situation, Task, Action, Result) for any live cases handled by me and questions came from the interviewer on similar lines which were answered comfortably.
As I faced the interview well prepared and no botheration on the outcome has helped me face it with less anxiety, hence this might be assumed as reason for successful selection.
Kellogg Brown and Root Interview FAQs
The duration of Kellogg Brown and Root interview process can vary, but typically it takes about less than 2 weeks to complete.
Tell us how to improve this page.
Kellogg Brown and Root Interviews By Designations
- Kellogg Brown and Root Associate Technical Professional Interview Questions
- Kellogg Brown and Root Project Director Interview Questions
- Kellogg Brown and Root Senior Accountant Interview Questions
- Kellogg Brown and Root Application Developer Interview Questions
- Kellogg Brown and Root Associate Professional Interview Questions
- Kellogg Brown and Root Auto CAD Engineer Interview Questions
- Kellogg Brown and Root Civil Quantity Surveyor Interview Questions
- Kellogg Brown and Root HSE Trainer Interview Questions
- Show more
Interview Questions for Popular Designations
Kellogg Brown and Root Interview Process for Experienced
based on 6 interviews in last 1 year
Interview experience
People are getting interviews through
Interview Questions from Similar Companies
Fast track your campus placements
Kellogg Brown and Root Reviews and Ratings
based on 388 reviews
Rating in categories
|
Technical Professional
94
salaries
|  ₹6.8 L/yr - ₹20.8 L/yr |
|
Associate Technical Professional
89
salaries
| ₹5.5 L/yr - ₹11.3 L/yr |
|
Senior Technical Professional
73
salaries
| ₹12 L/yr - ₹31.5 L/yr |
|
Accountant
57
salaries
| ₹3.8 L/yr - ₹11 L/yr |
|
Associate Accountant
48
salaries
| ₹3.7 L/yr - ₹6.6 L/yr |
Bechtel
Fluor Corporation
Jacobs Engineering Group
AECOM
Calculate your in-hand salary
- Home >
- Interviews >
- Kellogg Brown and Root Interview Questions >
- Kellogg Brown and Root Interview Questions for Experienced
