Upload Button Icon Add office photos

Kcc Buildcon

Compare button icon Compare button icon Compare

Filter interviews by

Kcc Buildcon Interview Questions, Process, and Tips

Updated 22 Jan 2025

Top Kcc Buildcon Interview Questions and Answers

View all 29 questions

Kcc Buildcon Interview Experiences

Popular Designations

28 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before May 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. How will you design well steining in well foundation
  • Ans. 

    Well steining in well foundation is designed by considering the soil conditions, water table level, and load requirements.

    • Evaluate soil conditions to determine the type and depth of well steining needed

    • Consider the water table level to prevent water seepage into the well

    • Design the well steining to withstand the expected loads and forces

    • Use materials such as concrete, steel, or timber for constructing the well steining

    • E...

  • Answered by AI

Structural Design Engineer Interview Questions asked at other Companies

Q1. IS 456 design clauses with min max bar requirements
View answer (2)

I applied via Walk-in and was interviewed in Mar 2022. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Aggregate density.surplus material.what is material reconciliation
  • Ans. 

    Material reconciliation is the process of comparing the amount of material used in a project with the amount that was planned.

    • Material reconciliation involves comparing the actual amount of material used in a project with the amount that was planned.

    • It helps to identify any discrepancies in the amount of material used and can help to reduce waste and save costs.

    • Aggregate density refers to the weight of aggregate per un...

  • Answered by AI
  • Q2. Aggregate density .grn full from name
  • Ans. 

    This question is unclear and lacks context.

    • Please provide more information or context for the question.

    • It is unclear what is being asked for.

    • Without additional information, it is impossible to answer this question.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep experience and better knowledge

Assistant Officer Interview Questions asked at other Companies

Q1. What is the difference between a stack and a queue? Give an example where you would use each.
View answer (3)

I applied via Company Website and was interviewed in May 2022. There were 2 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. About all concrete, dbm, pqc

Interview Preparation Tips

Interview preparation tips for other job seekers - we confident also and we shouldn't nervous.

QA QC Engineer Interview Questions asked at other Companies

Q1. wha is your response ?, if material will purchase from any factory then what will u do that ? , how many hours can u do work in a day?, do u know all plant calibration?, how the borrow area will select ?, how u manage your junior in work pe... read more
View answer (4)

Interview Questionnaire 

4 Questions

  • Q1. My work experience
  • Q2. Water cement ratio
  • Q3. Why we use admixture
  • Ans. 

    Admixtures are used to modify the properties of concrete, such as setting time, workability, and strength.

    • To improve workability of concrete

    • To reduce water content in concrete

    • To accelerate or retard setting time of concrete

    • To improve strength and durability of concrete

    • To reduce corrosion of reinforcement in concrete

    • Examples: water reducers, air-entraining agents, accelerators, retarders, superplasticizers

  • Answered by AI
  • Q4. Which type of cement we use in pqc
  • Ans. 

    We use Portland Pozzolana Cement (PPC) in PQC.

    • PPC is a type of cement that is commonly used in PQC.

    • It is a blend of Portland cement and pozzolanic materials like fly ash, volcanic ash, etc.

    • PPC is preferred over Ordinary Portland Cement (OPC) due to its higher durability, strength, and resistance to chemical attacks.

    • It also has a lower heat of hydration, which reduces the risk of thermal cracking.

    • Examples of PQC project...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Simply if you are experience person then they asked u related questions to your work

Highway Engineer Interview Questions asked at other Companies

Q1. What is the density of soil in embankment layer.
View answer (7)

Kcc Buildcon interview questions for popular designations

 Store Executive

 (2)

 QA QC Engineer

 (2)

 Assistant Engineer

 (1)

 Accountant

 (1)

 Manager

 (1)

 Quality Engineer

 (1)

 Assistant General Manager

 (1)

 QC Engineer

 (1)

Manager QS Interview Questions & Answers

user image Arun Kumar

posted on 30 Aug 2023

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. How to calculate the Quantity of a I girder as per drawing provided?
  • Ans. 

    Calculate the Quantity of a I girder as per provided drawing.

    • Identify the dimensions of the I girder from the drawing.

    • Calculate the volume of the I girder using the formula: Volume = Area of cross-section x Length.

    • Consider any additional factors such as material density or wastage percentage.

    • Use appropriate unit conversions if necessary.

    • Check for any specific requirements or variations mentioned in the drawing.

  • Answered by AI
Round 3 - Case Study 

A drawing was provided for steel calculations

Manager QS Interview Questions asked at other Companies

Q1. How to calculate the Quantity of a I girder as per drawing provided?
View answer (1)

Get interview-ready with Top Kcc Buildcon Interview Questions

Interview Questionnaire 

5 Questions

  • Q1. How many types of aggregate?
  • Ans. 

    There are two types of aggregate: fine aggregate and coarse aggregate.

    • Fine aggregate consists of small particles, typically less than 4.75mm in size.

    • Coarse aggregate consists of larger particles, typically between 4.75mm and 20mm in size.

    • Examples of fine aggregate include sand and crushed stone dust.

    • Examples of coarse aggregate include gravel and crushed stone.

  • Answered by AI
  • Q2. How many types of Grease?
  • Ans. 

    There are several types of grease used in various industries and applications.

    • Lithium grease

    • Silicone grease

    • Polyurea grease

    • Calcium grease

    • Bentone grease

    • Aluminum complex grease

    • PTFE grease

    • White lithium grease

    • Molybdenum disulfide grease

    • High-temperature grease

  • Answered by AI
  • Q3. How Many Types of Engine Oil and Hydraulic Oil?
  • Ans. 

    There are several types of engine oil and hydraulic oil available in the market.

    • There are four main types of engine oil: mineral oil, synthetic oil, semi-synthetic oil, and high-mileage oil.

    • Hydraulic oil can be classified into three types: mineral-based, synthetic-based, and water-based.

    • The type of oil required depends on the engine or hydraulic system and the manufacturer's recommendations.

    • Using the wrong type of oil ...

  • Answered by AI
  • Q4. How Many types of grades of Cement?
  • Ans. 

    There are three types of grades of cement: Ordinary Portland Cement (OPC), Portland Pozzolana Cement (PPC), and Portland Slag Cement (PSC).

    • Ordinary Portland Cement (OPC) is the most commonly used type of cement.

    • Portland Pozzolana Cement (PPC) contains pozzolanic materials like fly ash, volcanic ash, etc. which enhance its strength and durability.

    • Portland Slag Cement (PSC) is made by blending granulated blast furnace sl...

  • Answered by AI
  • Q5. What is the difference between Batching Plant and Hot Mixing Plant
  • Ans. 

    Batching plant is used for producing concrete while hot mixing plant is used for producing asphalt.

    • Batching plant is used for producing concrete while hot mixing plant is used for producing asphalt.

    • Batching plant has a separate storage for aggregates while hot mixing plant does not.

    • Batching plant has a separate weighing system for cement, water, and aggregates while hot mixing plant does not.

    • Batching plant produces con...

  • Answered by AI

Store Executive Interview Questions asked at other Companies

Q1. How to measure the materials like steel and metal
View answer (10)

I applied via Referral and was interviewed before Oct 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Statutory Compliance, PMS Process, Recruitment Process, Input from Site for Payroll, SAP Knowledge , HR Operation and Site Coordination.
  • Q2. Lesioning Ability, Administration

Interview Preparation Tips

Interview preparation tips for other job seekers - Update about Statutory Compliances, PMS Cycle as well as Applicable permits for Site.

Assistant General Manager Interview Questions asked at other Companies

Q1. It is observed that most of our Indian Bank's NIM is declining over the years. what could be some alternate revenue model for banks for boosting overall income to compensate for the declining NIM?
View answer (2)

Manager Interview Questions & Answers

user image Anonymous

posted on 23 Sep 2022

I applied via Approached by Company and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(3 Questions)

  • Q1. HR person will shortlist the CV
  • Q2. General question related personal
  • Q3. Whats your last company salary,designation

Interview Preparation Tips

Interview preparation tips for other job seekers - Best of luck, some best person person have good knowledge is there in HO, so interview may be tough.

Manager Interview Questions asked at other Companies

Q1. There is a chairman of a conglomerate. He has been on the post for 10 years, and is extremely dominating. He treats the various business heads like children, not letting them take any major decision. While the chairman has negatives, he bel... read more
View answer (2)
Round 1 - HR 
Round 2 - HR 

(1 Question)

  • Q1. Vacancy
Round 3 - HR 

Land Surveyor Interview Questions asked at other Companies

Q1. Convert quadrant bearing to whole circle bearing.
View answer (2)

I applied via Referral and was interviewed in Aug 2021. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. Swg full form binding wire gaze dmr diesel issue how material checking and invoice verify
  • Q2. All question answer not answer swg full form

Interview Preparation Tips

Interview preparation tips for other job seekers - Excellent interview and good opertunity

Junior Officer Stores Interview Questions asked at other Companies

Q1. Do you know SAP & outlook
View answer (3)

Kcc Buildcon Interview FAQs

How many rounds are there in Kcc Buildcon interview?
Kcc Buildcon interview process usually has 2-3 rounds. The most common rounds in the Kcc Buildcon interview process are Technical, HR and Resume Shortlist.
How to prepare for Kcc Buildcon interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Kcc Buildcon. The most common topics and skills that interviewers at Kcc Buildcon expect are Material Procurement, Procurement, Purchase, Quantity Surveying and Rate Analysis.
What are the top questions asked in Kcc Buildcon interview?

Some of the top questions asked at the Kcc Buildcon interview -

  1. What is the difference between Batching Plant and Hot Mixing Pl...read more
  2. Describe the test of impact value what are its limit for wearing course and bas...read more
  3. What is the relationship between unconsolidated compressive strength and CBR va...read more
How long is the Kcc Buildcon interview process?

The duration of Kcc Buildcon interview process can vary, but typically it takes about less than 2 weeks to complete.

Tell us how to improve this page.

Kcc Buildcon Interview Process

based on 24 interviews

Interview experience

4.3
  
Good
View more

Interview Questions from Similar Companies

Tata Projects Interview Questions
4.2
 • 426 Interviews
GMR Group Interview Questions
4.0
 • 80 Interviews
GAMMON INDIA Interview Questions
3.8
 • 29 Interviews
Punj Lloyd Interview Questions
4.3
 • 18 Interviews
View all

Kcc Buildcon Reviews and Ratings

based on 340 reviews

4.0/5

Rating in categories

3.7

Skill development

3.8

Work-life balance

3.6

Salary

3.6

Job security

3.8

Company culture

3.5

Promotions

3.8

Work satisfaction

Explore 340 Reviews and Ratings
Assistant Manager
42 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Highway Engineer
35 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
29 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Accountant
26 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Structural Engineer
24 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Kcc Buildcon with

Larsen & Toubro Limited

4.0
Compare

Tata Projects

4.2
Compare

Shapoorji Pallonji Group

4.1
Compare

Punj Lloyd

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview