AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
JSW Group Mechanical Engineer Interview Questions, Process, and Tips
Top JSW Group Mechanical Engineer Interview Questions and Answers
- Q1. Why should low width of coil in variation so how can increase ?
- Q2. If rolls elongation is not proper so waveness observed at the time of made pipes?
- Q3. How can control heat variation of HF plant?
JSW Group Mechanical Engineer Interview Experiences
2 interviews found
I applied via Walk-in and was interviewed in Aug 2021. There was 1 interview round.
Interview Questionnaire
3 Questions
- Q1. Why should low width of coil in variation so how can increase ?
- Ans.
Low width of coil can affect performance, increasing it can improve efficiency.
Low coil width can lead to poor heat transfer and reduced efficiency
Increasing coil width can improve heat transfer and increase efficiency
Factors such as space constraints and cost may limit the ability to increase coil width
- Q2. How can control heat variation of HF plant?
- Ans.
Heat variation in HF plant can be controlled through various methods.
Maintaining proper insulation in the plant
Using heat exchangers to transfer heat from one process to another
Implementing a control system to monitor and adjust temperature
Regular maintenance and cleaning of equipment to prevent heat buildup
Using cooling towers or water sprays to reduce temperature
Optimizing the plant layout to minimize heat transfer b
- Q3. If rolls elongation is not proper so waveness observed at the time of made pipes?
- Ans.
Improper rolls elongation can cause waveness in pipes during production.
Rolls elongation is the process of stretching the metal sheet to the desired thickness.
If the elongation is not proper, it can cause uneven thickness and waveness in the pipes.
This can lead to defects in the final product and affect its performance.
Proper calibration and maintenance of the rolling equipment can prevent this issue.
Regular inspection...
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed in Jun 2024. There was 1 interview round.
(2 Questions)
- Q1. Process of production
- Q2. Final production process
Interview Preparation Tips
- Hot Forging
- Technical Support
- Testing Tools
- Production Planning
- ERP
Top trending discussions
Interview questions from similar companies
Moula hussain.M
I applied via Walk-in and was interviewed in Nov 2024. There was 1 interview round.
(2 Questions)
- Q1. How to know if Hydraulic cylinder leakage
- Ans.
Check for hydraulic cylinder leakage by inspecting for oil puddles, decreased performance, and abnormal noises.
Inspect the area around the hydraulic cylinder for oil puddles or stains
Monitor the performance of the hydraulic system for any decrease in efficiency
Listen for any abnormal noises coming from the hydraulic cylinder during operation
- Q2. What is NAS
- Ans.
NAS stands for Network Attached Storage, which is a type of storage device that connects to a network to provide shared storage space.
NAS devices are typically used for storing and sharing files, data backups, and media streaming within a network.
NAS devices can be accessed by multiple users and devices simultaneously over a network.
NAS devices often have their own operating system and can run various applications such...
Interview Preparation Tips
Mechanical Engineer Interview Questions & Answers
ArcelorMittal Nippon Steel
Anonymous
posted on 18 Apr 2024
Selected
I applied via Recruitment Consulltant and was interviewed in Mar 2024. There were 4 interview rounds.
Gearbox and fluid coupling replacement work and development
Senior manager and manager and all employees job description for growth and development
Cash study in machanical engineering decision making thermodynamics fluid machanics and heat transfer
(11 Questions)
- Q1. Gear box replacement work safely first and all ppes sure and paper work and try out checking and saving and job work clean and fresh and tackup up and clamping conveyer belt old gear box replacement for ne...
- Q2. Barring checking and replacement work and safety first and all ppes sure and paper work and try out sure and teckup up and clamping conveyer belt and plummer block top cover open Barring checking and remov...
- Q3. Conveyer belt pmi roller checking work and safety first and all ppes sure and paper work and walked away clean and fresh and Roller cut marking frem number and belt tracking and belt close and try out sure...
- Q4. Barring greasing work and safety first and all ppes sure and paper work and conveyer belt running and walked away clean and fresh and grease gun and greasing work
- Q5. Conveyer belt panching work and safety first and all ppes sure and paper work and try out same position and solution and hardner bad mixed mad belt panching work
- Q6. Conveyer belt chute replacement work and safety first and all ppes sure and paper work and try out and jobs walked away clean and fresh and same chute replace and tightening bolt and machine welding and fi...
- Q7. Conveyer belt v-scraper replacement work and safety first and all ppes sure and paper work belt close and try out and walked away from clean and fresh and same v -scraper making and replacement work
- Q8. Gear box old oil replacement work and safety first and all ppes sure and paper work and belt close and try out and walked away clean and fresh and oil gauge and checking and drain oil and Aw320 oil replac...
- Q9. Fluid coupling oil replacement work and safety first and all ppes sure and paper work and try out lockout and tagout (loto) safety procedure and fuse plug and open west oil remove and new aw46oil replacem...
- Q10. Drive pmi work and safety first and all ppes sure and paper work and try out ofter walked away clean and fresh and bass bolt nut tightening work
- Q11. Gear box cleaning work and safety first and all ppes sure and paper work and walked away clean and fresh and ty out sure and clean and fresh and same process paper work cancelled and conveyer belt running...
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed in Mar 2024. There was 1 interview round.
(11 Questions)
- Q1. Gearbox and fluid coupling replacement work and Roller replacement work and exicider work
- Ans. Yes gear box . fluid Coupling and roller replacement work and exicider working and all conveyor work perfectly
- Q2. Gear box and fluid coupling
- Q3. Canvour safety work and neep point opening very competent work
- Q4. Canvour safety work bad and belt switch and pull code work
- Q5. Conveour and all work
- Q6. Gearl box and vibrating hopper Der screen work
- Q7. All people worker and safety tool box talk about conveour work
- Q8. Parmit formality and loto safety work
- Q9. Safety first shoes , helmet, google, dustmass, and etc
- Q10. Road safety formality work
- Q11. Running conveour gard work
Interview Preparation Tips
Mechanical Engineer Interview Questions & Answers
Steel Authority Of India
Anonymous
posted on 25 May 2024
I applied via Company Website and was interviewed in Apr 2024. There were 2 interview rounds.
Gear box replacement work
(6 Questions)
- Q1. Barring checking and replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and blumber block top cover open and old slue Barring remove and new slue...
- Ans.
Blumber block top cover open and old slue Barring remove and new slue Barring replace and nut tightening sure and blumber block top cover fixed and bolts nut tightening sure and paper work cancelled and conveyer belt running ok
- Q2. Motor replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old motor remove and new motor replace and bolts nut tightening s...
- Ans.
Bolt nut open and old motor remove and new motor replace and bolt nut tightening sure and Dayal gauge eliminate process ok and paper work cancelled and conveyer belt running ok
- Q3. V-scraper replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old v-scraper remove new v-scraper replace and bolts nut tigh...
- Q4. Discharge Chute replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old discharge chute remove and new discharge chute repl...
- Ans.
Bolt nut open and old discharge chute remove and new discharge chute replace and bolts nut tightening sure and paper work cancelled and conveyer belt running ok
- Q5. Barring Greasing work and safety first and all ppes sure and paper work and all pulley checking and savings greasing sure and paper work cancelled
- Q6. Gear box replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old gear box remove and new gear box replace and bolts nut tig...
Interview Preparation Tips
Satyam Chandra
(2 Questions)
- Q1. What is Hydraulic system and it's components?
- Ans.
A hydraulic system uses fluid to transmit power and consists of components like pumps, cylinders, valves, and hoses.
Hydraulic pump: generates flow to the hydraulic system
Hydraulic cylinder: converts fluid power into mechanical power
Hydraulic valve: controls the flow and pressure of the fluid
Hydraulic hose: carries the fluid between components
- Q2. Explain steel making process?
- Ans.
Steel making process involves converting iron ore into steel through various stages like smelting, refining, and casting.
Iron ore is mined and transported to a steel mill.
The iron ore is smelted in a blast furnace to remove impurities and create molten iron.
The molten iron is then refined in a basic oxygen furnace or an electric arc furnace to adjust the carbon content and other alloying elements.
The refined molten iro...
Interview Preparation Tips
Selected
I applied via Walk-in
(3 Questions)
- Q1. Mechanical maintenance
- Q2. Any question in mechanical & hydraulics
- Q3. Any mechanical maintenance
Interview Preparation Tips
Mechanical Engineer Interview Questions & Answers
Shyam Steel Industries
Anonymous
posted on 13 Aug 2024
(2 Questions)
- Q1. Tell me about yourself
- Q2. Strength or weakness
Interview Preparation Tips
Mechanical Engineer Interview Questions & Answers
Jindal Steel and Power
Anonymous
posted on 23 Apr 2024
About self explanation
(2 Questions)
- Q1. Define yourself
- Q2. Why you interested in jspl
Interview Preparation Tips
JSW Group Interview FAQs
Tell us how to improve this page.
JSW Group Interviews By Designations
- JSW Group Graduate Engineer Trainee (Get) Interview Questions
- JSW Group Assistant Manager Interview Questions
- JSW Group Electrical Engineer Interview Questions
- JSW Group Safety Officer Interview Questions
- JSW Group Apprenticeship Trainee Interview Questions
- JSW Group Civil Engineer Interview Questions
- JSW Group Customer Relation Officer Interview Questions
- JSW Group Deputy Manager Interview Questions
- Show more
Interview Questions for Popular Designations
- Mechanical Maintenance Engineer Interview Questions
- Diploma Mechanical Engineer Interview Questions
- Mechanical Technician Interview Questions
- Senior Engineer Mechanical Interview Questions
- Mechanical Supervisor Interview Questions
- Junior Mechanical Engineer Interview Questions
- Mechanical Fitter Interview Questions
- Mechanical Maintenance Fitter Interview Questions
- Show more
JSW Group Mechanical Engineer Interview Process
based on 1 interview
Interview experience
Mechanical Engineer Interview Questions from Similar Companies
Fast track your campus placements
JSW Group Mechanical Engineer Reviews and Ratings
based on 6 reviews
Rating in categories
|
Assistant Manager
256
salaries
|  ₹4.9 L/yr - ₹12.5 L/yr |
|
Graduate Engineer Trainee (Get)
156
salaries
| ₹5.5 L/yr - ₹10 L/yr |
|
Deputy Manager
106
salaries
| ₹6.2 L/yr - ₹21 L/yr |
|
Manager
85
salaries
| ₹8.1 L/yr - ₹23 L/yr |
|
Senior Engineer
74
salaries
| ₹5 L/yr - ₹9.1 L/yr |
Tata Group
Adani Group
Reliance Industries
Bharti Enterprises
- Home >
- Interviews >
- JSW Group Interview Questions >
- JSW Group Mechanical Engineer Interview Questions
