Upload Button Icon Add office photos

JSW Group

Compare button icon Compare button icon Compare

Filter interviews by

JSW Group Mechanical Engineer Interview Questions, Process, and Tips

Updated 13 Jul 2024

Top JSW Group Mechanical Engineer Interview Questions and Answers

JSW Group Mechanical Engineer Interview Experiences

2 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jun 2024. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Process of production
  • Ans. 

    The process of production involves transforming raw materials into finished products through various stages.

    • Identifying raw materials needed for production

    • Designing the production process

    • Manufacturing the product

    • Quality control checks

    • Packaging and distribution

    • Continuous improvement of production process

  • Answered by AI
  • Q2. Final production process
  • Ans. 

    The final production process involves the last steps in manufacturing a product before it is ready for distribution.

    • Final inspection and quality control checks are conducted to ensure the product meets specifications.

    • Packaging and labeling are completed to prepare the product for shipping.

    • Any necessary finishing touches or assembly steps are done to complete the product.

    • Documentation and record-keeping are finalized to...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for JSW Group Mechanical Engineer interview:
  • Hot Forging
  • Technical Support
  • Testing Tools
  • Production Planning
  • ERP
Interview preparation tips for other job seekers - take interview one on one offline or online ,as per candidate experience u can select it.

I applied via Walk-in and was interviewed in Aug 2021. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. Why should low width of coil in variation so how can increase ?
  • Ans. 

    Low width of coil can affect performance, increasing it can improve efficiency.

    • Low coil width can lead to poor heat transfer and reduced efficiency

    • Increasing coil width can improve heat transfer and increase efficiency

    • Factors such as space constraints and cost may limit the ability to increase coil width

  • Answered by AI
  • Q2. How can control heat variation of HF plant?
  • Ans. 

    Heat variation in HF plant can be controlled through various methods.

    • Maintaining proper insulation in the plant

    • Using heat exchangers to transfer heat from one process to another

    • Implementing a control system to monitor and adjust temperature

    • Regular maintenance and cleaning of equipment to prevent heat buildup

    • Using cooling towers or water sprays to reduce temperature

    • Optimizing the plant layout to minimize heat transfer b

  • Answered by AI
  • Q3. If rolls elongation is not proper so waveness observed at the time of made pipes?
  • Ans. 

    Improper rolls elongation can cause waveness in pipes during production.

    • Rolls elongation is the process of stretching the metal sheet to the desired thickness.

    • If the elongation is not proper, it can cause uneven thickness and waveness in the pipes.

    • This can lead to defects in the final product and affect its performance.

    • Proper calibration and maintenance of the rolling equipment can prevent this issue.

    • Regular inspection...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Basically I am diploma mechanical so I would like to face my interview to related my profession & work place

Mechanical Engineer Interview Questions Asked at Other Companies

Q1. What we need to do if pressure valve fail in boiler
Q2. What are the basic parts of an aeroplane and there working functi ... read more
asked in Tata Steel
Q3. Percentage of carbon presence in cast iron
Q4. How we cool a pipe in a chamber without using coolent
Q5. Why petrol engines comparison ratio low when compared to a diesel ... read more

Interview questions from similar companies

I applied via Referral and was interviewed in Jan 2021. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Turbine labyrinth material

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't worry and what you know telling freely
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. Tell me about yourself
  • Q2. Strength or weakness

Interview Preparation Tips

Interview preparation tips for other job seekers - Learn to grow
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - One-on-one 

(5 Questions)

  • Q1. How to make the company better?
  • Q2. There should be unity in the company.
  • Q3. Attention should be given to how well the employees work in the company.
  • Q4. Whoever is the owner of the company or whoever is the manager, it is everyone.Behave well and be honest.
  • Q5. Whoever it may be in the company, be it manager or employee, help them for any inconvenience.

Interview Preparation Tips

Interview preparation tips for other job seekers - The company is very good
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Walk-in and was interviewed in Nov 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. How to know if Hydraulic cylinder leakage
  • Ans. 

    Check for hydraulic cylinder leakage by inspecting for oil puddles, decreased performance, and abnormal noises.

    • Inspect the area around the hydraulic cylinder for oil puddles or stains

    • Monitor the performance of the hydraulic system for any decrease in efficiency

    • Listen for any abnormal noises coming from the hydraulic cylinder during operation

  • Answered by AI
  • Q2. What is NAS
  • Ans. 

    NAS stands for Network Attached Storage, which is a type of storage device that connects to a network to provide shared storage space.

    • NAS devices are typically used for storing and sharing files, data backups, and media streaming within a network.

    • NAS devices can be accessed by multiple users and devices simultaneously over a network.

    • NAS devices often have their own operating system and can run various applications such...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well about your work

I appeared for an interview in Jul 2017.

Interview Preparation Tips

Round: Resume Shortlist
Experience: Ash handling system in thermal power plant operation & maintenance
Tips: Vaccum system

Skills: Engineering Basics

I appeared for an interview in Sep 2017.

Interview Preparation Tips

Round: Resume Shortlist
Experience: Mechanical engineer
Tips: Strong knowledge of mechanical maintenance

Round: Group Discussion
Duration: 1 hour

Skills: Mechanical Engineering Basics

I appeared for an interview in Jun 2017.

Interview Questionnaire 

8 Questions

  • Q1. Percentage of carbon presence in cast iron
  • Ans. 

    The percentage of carbon presence in cast iron varies from 2.1% to 6.67% depending on the type of cast iron.

    • Cast iron is classified into four types based on its carbon content: white, gray, ductile, and malleable.

    • White cast iron has the highest carbon content, ranging from 2.1% to 6.67%.

    • Gray cast iron has a lower carbon content, ranging from 2.5% to 4%.

    • Ductile cast iron has a carbon content of 3.2% to 4.1%.

    • Malleable ca...

  • Answered by AI
  • Q2. What did u mean by addendum in gears
  • Ans. 

    Addendum is the height of the tooth above the pitch circle in a gear.

    • Addendum is the distance between the pitch circle and the top of the gear tooth.

    • It is an important parameter in gear design as it affects the strength and durability of the gear.

    • The addendum can be calculated using the formula addendum = module or diametral pitch.

    • For example, in a gear with a module of 2mm, the addendum would be 2mm.

    • Addendum is the op...

  • Answered by AI
  • Q3. Least count of varnier calipers
  • Ans. 

    The least count of vernier calipers is the smallest measurement that can be accurately read on the scale.

    • The least count is determined by the number of divisions on the main scale and the vernier scale.

    • It is calculated by dividing the smallest division on the main scale by the number of divisions on the vernier scale.

    • For example, if the smallest division on the main scale is 0.1 mm and the vernier scale has 10 division

  • Answered by AI
  • Q4. Tell me something about ur company where u are working ?
  • Ans. 

    I work for a leading engineering firm specializing in designing and manufacturing industrial machinery.

    • We have a team of experienced mechanical engineers who work on various projects

    • Our company focuses on innovation and cutting-edge technology in our designs

    • We have successfully completed projects for clients in the automotive and aerospace industries

  • Answered by AI
  • Q5. Tell me your family background ?
  • Ans. 

    I come from a close-knit family with a strong emphasis on education and hard work.

    • My parents are both engineers, so I grew up with a passion for problem-solving and innovation.

    • I have two siblings, one of whom is also pursuing a career in engineering.

    • Family gatherings often involve discussions about new technologies and projects we are working on.

    • My family has always been supportive of my academic and career pursuits.

  • Answered by AI
  • Q6. Tell me something about yourself ?
  • Ans. 

    I am a passionate mechanical engineer with a strong background in designing and implementing innovative solutions.

    • Graduated with a degree in Mechanical Engineering from XYZ University

    • Completed internships at ABC Company and gained hands-on experience in CAD software

    • Led a team project to design and build a prototype for a new cooling system

    • Continuously learning and staying updated on the latest industry trends and techn

  • Answered by AI
  • Q7. Why are u join this company ?
  • Ans. 

    I am joining this company because of its reputation for innovation and commitment to employee growth.

    • Opportunity to work on cutting-edge projects

    • Strong focus on professional development

    • Positive company culture and values

    • Potential for career advancement

    • Desire to contribute to a successful team

  • Answered by AI
  • Q8. Why I hire u?
  • Ans. 

    I have a strong background in mechanical engineering with hands-on experience in designing and implementing innovative solutions.

    • Extensive knowledge in mechanical engineering principles and practices

    • Proven track record of successfully completing projects on time and within budget

    • Strong problem-solving skills and ability to think creatively

    • Experience in using CAD software for design and analysis

    • Excellent communication a...

  • Answered by AI

Interview Preparation Tips

Round: Technical Interview
Experience: I hv cleared

Round: HR Interview
Experience: I was narvous and rejected.

Skills: Way Of Answering

I applied via Company Website and was interviewed before Jun 2020. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. Qualification only
  • Q2. Maintenance related
  • Q3. Bearing and gear information

Interview Preparation Tips

Interview preparation tips for other job seekers - Machinecal maintenance engineering sms 2 & mines area Experience

JSW Group Interview FAQs

How many rounds are there in JSW Group Mechanical Engineer interview?
JSW Group interview process usually has 1 rounds. The most common rounds in the JSW Group interview process are One-on-one Round.
What are the top questions asked in JSW Group Mechanical Engineer interview?

Some of the top questions asked at the JSW Group Mechanical Engineer interview -

  1. Why should low width of coil in variation so how can increas...read more
  2. If rolls elongation is not proper so waveness observed at the time of made pipe...read more
  3. How can control heat variation of HF pla...read more

Tell us how to improve this page.

JSW Group Mechanical Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
JSW Group Mechanical Engineer Salary
based on 14 salaries
₹2 L/yr - ₹4.8 L/yr
At par with the average Mechanical Engineer Salary in India
View more details

JSW Group Mechanical Engineer Reviews and Ratings

based on 6 reviews

4.3/5

Rating in categories

3.9

Skill development

4.1

Work-life balance

4.1

Salary

3.9

Job security

4.3

Company culture

3.9

Promotions

4.3

Work satisfaction

Explore 6 Reviews and Ratings
Assistant Manager
282 salaries
unlock blur

₹4.9 L/yr - ₹13 L/yr

Graduate Engineer Trainee (Get)
165 salaries
unlock blur

₹5.5 L/yr - ₹11 L/yr

Deputy Manager
123 salaries
unlock blur

₹6.2 L/yr - ₹21 L/yr

Manager
78 salaries
unlock blur

₹8.1 L/yr - ₹23 L/yr

Senior Engineer
74 salaries
unlock blur

₹5 L/yr - ₹9 L/yr

Explore more salaries
Compare JSW Group with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Jindal Steel and Power

3.9
Compare

ArcelorMittal Nippon Steel

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview