JSW Group Assistant Manager Interview Questions and Answers

Q1. Definition and Analysis of Listed Company
Ans. 
A listed company is a publicly traded company whose shares are traded on a stock exchange.
• Listed companies must adhere to strict regulations and reporting requirements set by the stock exchange.

• Investors can buy and sell shares of listed companies on the stock exchange.

• Listed companies often have a higher level of transparency and accountability compared to private companies.

• Examples of listed companies include Apple I
Answered by AI
Add your answer
Q2. Secretarial Compliances requirement for Listed Company
Ans. 
Secretarial compliances for a listed company include adherence to regulations set by stock exchanges and regulatory bodies.
• Regular submission of financial reports and disclosures to stock exchanges

• Compliance with SEBI regulations and guidelines

• Conducting board meetings within specified time frames

• Maintaining proper records and registers as per Companies Act

• Ensuring timely communication with shareholders and investors
Answered by AI
Add your answer

Gear box replacement work

Q1. Motor replacement work and safety first and paper work and walked away clean and fresh and try out and bolt nut open and old motor remove and new motor replace and bolt nut tightening sure and paper work c...read more
Add your answer
Q2. Discharge chute replacement work and safety first and paper work and walked away clean and fresh and try out and bolt nut open and old discharge chute remove and new discharge chute replace and bolt nut ti...read more
Add your answer
Q3. Conveyor belt roller replacement work and safety first and paper work and walked away clean and fresh and try out and fream number mark and cut roller remove and shifting and walked away clean and fresh an...read more
Add your answer
Q4. Conveyor belt all pully greasing and saving work and safety first and paper work and walked away clean and fresh and all pully checking and saving greasing gun and all' pully greasing done and paper work c...read more
Add your answer
Q5. Barring checking and saving work and safety first and paper work and walked away clean and fresh and try out blumber block top cover open and old slue barring remove and new slue barring replace and bolt n...read more
Add your answer
Q6. Gear Box replacement wor and paper work Safety first and try out and bolt nut open and old gear box remove and new gear box replace and bolt nut tightening Sure and dayal guage eliminate process ok and p...read more
Add your answer

Q1. What will you check before starting erection activities?
Ans. 
Before starting erection activities, it is important to check for safety hazards, proper equipment, and necessary permits.
• Ensure all safety hazards are identified and addressed

• Check that all necessary equipment is in working order

• Verify that all required permits and approvals are obtained

• Inspect the site for any potential obstacles or obstructions
Answered by AI
Add your answer
Q2. Selection of Crane?
Ans. 
The selection of a crane depends on factors such as weight capacity, reach, height, and terrain.
• Consider the weight capacity of the crane to ensure it can lift the required loads.

• Evaluate the reach and height of the crane to determine if it can access the work area effectively.

• Take into account the terrain where the crane will be operating to choose the appropriate type (e.g. rough terrain crane, crawler crane).
Answered by AI
Add your answer
Q3. Load angle Factor ?
Ans. 
Load angle factor is a term used in engineering to describe the angle at which a load is applied to a structure.
• Load angle factor is important in determining the stress and strain on a structure.

• It is typically calculated by taking the cosine of the angle at which the load is applied.

• For example, if a load is applied at a 45 degree angle, the load angle factor would be cos(45) = 0.707.
Answered by AI
Add your answer
Q4. Sling angle Factor?
Ans. 
Sling angle factor refers to the angle at which a sling is attached to a load, affecting the load's stability and the force exerted on the sling.
• Sling angle factor is calculated by dividing the actual load weight by the weight of the load being lifted.

• A smaller sling angle increases the force on the sling and decreases its capacity.

• A larger sling angle reduces the force on the sling and increases its capacity.

• Proper ca...read more
Answered by AI
Add your answer
Q5. Safe Load lifting percentage ?
Ans. 
Safe load lifting percentage refers to the maximum weight a person can safely lift based on their capabilities.
• Safe load lifting percentage is typically calculated as a percentage of a person's maximum lifting capacity.

• Factors such as age, gender, fitness level, and previous injuries can affect safe load lifting percentage.

• It is important for employees to be trained on proper lifting techniques to prevent injuries.

• For ...read more
Answered by AI
Add your answer
Q6. What is HIRA ?
Ans. 
HIRA stands for Hazard Identification and Risk Assessment. It is a process used to identify potential hazards and analyze the associated risks in a workplace.
• HIRA involves identifying hazards that could cause harm, assessing the risks associated with those hazards, and implementing control measures to mitigate the risks.

• Examples of hazards include chemical exposure, machinery malfunctions, and ergonomic issues.

• The goal...read more
Answered by AI
Add your answer
Q7. How will you prepare HIRA?
Add your answer
Q8. Difference between MCB,ELCB,RCCB?
Ans. 
MCB is a miniature circuit breaker, ELCB is an earth leakage circuit breaker, and RCCB is a residual current circuit breaker.
• MCB is used to protect electrical circuits from overloads and short circuits.

• ELCB is used to detect earth faults and disconnect the power supply to prevent electric shocks.

• RCCB is used to detect residual current imbalances and disconnect the circuit to prevent electric shocks.

• MCB and RCCB are com...read more
Answered by AI
Add your answer
Q9. How will you check the Crane girder Camber?
Ans. 
To check the Crane girder Camber, measurements can be taken using a straight edge or laser level.
• Use a straight edge to measure the camber of the crane girder by placing it along the length of the girder and checking for any deviations from a straight line.

• Alternatively, a laser level can be used to project a straight line along the length of the girder and measure any deviations from this line.

• Regular inspections shou...read more
Answered by AI
Add your answer
Q10. Difference between Luffing and fly jib ?
Ans. 
Luffing jib moves vertically to change the angle of the hook, while fly jib extends horizontally to increase reach.
• Luffing jib is used to change the angle of the hook without moving the crane itself.

• Fly jib extends horizontally to increase the reach of the crane.

• Luffing jib moves vertically, while fly jib moves horizontally.

• Luffing jib is commonly used in high-rise construction projects, while fly jib is used for reach...read more
Answered by AI
Add your answer