Upload Button Icon Add office photos

ESL Steel

Compare button icon Compare button icon Compare

Filter interviews by

ESL Steel Mechanical Engineer Interview Questions and Answers

Updated 23 Jun 2024

ESL Steel Mechanical Engineer Interview Experiences

2 interviews found

Mechanical Engineer Interview Questions & Answers

user image Satyam Chandra

posted on 23 Jun 2024

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. What is Hydraulic system and it's components?
  • Ans. 

    A hydraulic system uses fluid to transmit power and consists of components like pumps, cylinders, valves, and hoses.

    • Hydraulic pump: generates flow to the hydraulic system

    • Hydraulic cylinder: converts fluid power into mechanical power

    • Hydraulic valve: controls the flow and pressure of the fluid

    • Hydraulic hose: carries the fluid between components

  • Answered by AI
  • Q2. Explain steel making process?
  • Ans. 

    Steel making process involves converting iron ore into steel through various stages like smelting, refining, and casting.

    • Iron ore is mined and transported to a steel mill.

    • The iron ore is smelted in a blast furnace to remove impurities and create molten iron.

    • The molten iron is then refined in a basic oxygen furnace or an electric arc furnace to adjust the carbon content and other alloying elements.

    • The refined molten iro...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Everything was good interview was quite impressive and perfect.

I applied via Naukri.com and was interviewed in Apr 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Most of the question asked from my expriece field related, also asked about achievements my contribution

Interview Preparation Tips

Interview preparation tips for other job seekers - Always tell facts never lie tell what changes that you take when you were there

Mechanical Engineer Interview Questions Asked at Other Companies

Q1. What we need to do if pressure valve fail in boiler
Q2. What are the basic parts of an aeroplane and there working functi ... read more
asked in Tata Steel
Q3. Percentage of carbon presence in cast iron
Q4. How we cool a pipe in a chamber without using coolent
Q5. Why petrol engines comparison ratio low when compared to a diesel ... read more

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Walk-in and was interviewed in Nov 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. How to know if Hydraulic cylinder leakage
  • Ans. 

    Check for hydraulic cylinder leakage by inspecting for oil puddles, decreased performance, and abnormal noises.

    • Inspect the area around the hydraulic cylinder for oil puddles or stains

    • Monitor the performance of the hydraulic system for any decrease in efficiency

    • Listen for any abnormal noises coming from the hydraulic cylinder during operation

  • Answered by AI
  • Q2. What is NAS
  • Ans. 

    NAS stands for Network Attached Storage, which is a type of storage device that connects to a network to provide shared storage space.

    • NAS devices are typically used for storing and sharing files, data backups, and media streaming within a network.

    • NAS devices can be accessed by multiple users and devices simultaneously over a network.

    • NAS devices often have their own operating system and can run various applications such...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well about your work
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Mar 2024. There was 1 interview round.

Round 1 - Technical 

(11 Questions)

  • Q1. Gearbox and fluid coupling replacement work and Roller replacement work and exicider work
  • Ans. Yes gear box . fluid Coupling and roller replacement work and exicider working and all conveyor work perfectly
  • Answered Anonymously
  • Q2. Gear box and fluid coupling
  • Q3. Canvour safety work and neep point opening very competent work
  • Q4. Canvour safety work bad and belt switch and pull code work
  • Q5. Conveour and all work
  • Q6. Gearl box and vibrating hopper Der screen work
  • Q7. All people worker and safety tool box talk about conveour work
  • Q8. Parmit formality and loto safety work
  • Q9. Safety first shoes , helmet, google, dustmass, and etc
  • Q10. Road safety formality work
  • Q11. Running conveour gard work

Interview Preparation Tips

Interview preparation tips for other job seekers - Because of the opportunity for growth and advancement
Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
Not Selected

I applied via Company Website

Round 1 - Group Discussion 

Safety first and prodction must

Round 2 - Technical 

(3 Questions)

  • Q1. All safety tool's and all ppes and machanical jobs clean and fresh but kids re start with the parmission
  • Q2. Gear box question
  • Q3. Fluid coupling and material of handling
Round 3 - Technical 

(2 Questions)

  • Q1. Any machanical jobs question
  • Q2. But any machanical jobs question
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
-

I applied via Company Website and was interviewed in Apr 2024. There were 2 interview rounds.

Round 1 - Group Discussion 

Gear box replacement work

Round 2 - HR 

(6 Questions)

  • Q1. Barring checking and replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and blumber block top cover open and old slue Barring remove and new slue...
  • Ans. 

    Blumber block top cover open and old slue Barring remove and new slue Barring replace and nut tightening sure and blumber block top cover fixed and bolts nut tightening sure and paper work cancelled and conveyer belt running ok

  • Answered Anonymously
  • Q2. Motor replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old motor remove and new motor replace and bolts nut tightening s...
  • Ans. 

    Bolt nut open and old motor remove and new motor replace and bolt nut tightening sure and Dayal gauge eliminate process ok and paper work cancelled and conveyer belt running ok

  • Answered Anonymously
  • Q3. V-scraper replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old v-scraper remove new v-scraper replace and bolts nut tigh...
  • Q4. Discharge Chute replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old discharge chute remove and new discharge chute repl...
  • Ans. 

    Bolt nut open and old discharge chute remove and new discharge chute replace and bolts nut tightening sure and paper work cancelled and conveyer belt running ok

  • Answered Anonymously
  • Q5. Barring Greasing work and safety first and all ppes sure and paper work and all pulley checking and savings greasing sure and paper work cancelled
  • Q6. Gear box replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old gear box remove and new gear box replace and bolts nut tig...

Interview Preparation Tips

Interview preparation tips for other job seekers - Because of the opportunity for growth and advancement
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in

Round 1 - Technical 

(3 Questions)

  • Q1. Mechanical maintenance
  • Q2. Any question in mechanical & hydraulics
  • Q3. Any mechanical maintenance

Interview Preparation Tips

Interview preparation tips for other job seekers - Mechanical Engineer at production unit

I applied via Referral and was interviewed in Jul 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Asking about submerged arc furnace, hydraulic system, air pollution control system

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident, speak what you know
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - One-on-one 

(3 Questions)

  • Q1. Basic fundamentals questions
  • Q2. What is rankine cycle..
  • Ans. 

    Rankine cycle is a thermodynamic cycle used in steam power plants to convert heat into mechanical work.

    • Rankine cycle is a thermodynamic cycle that converts heat into mechanical work.

    • It consists of four main components: a boiler, turbine, condenser, and pump.

    • Steam is generated in the boiler by heating water using a fuel source.

    • The steam then enters the turbine where it expands, producing mechanical work.

    • After exiting th...

  • Answered by AI
  • Q3. What is 2 stroke engine...
  • Ans. 

    A 2-stroke engine is a type of internal combustion engine that completes a power cycle with two strokes of the piston during only one crankshaft revolution.

    • Uses a mixture of fuel and oil for lubrication

    • Requires a spark plug for ignition

    • Commonly used in small engines like chainsaws, motorcycles, and outboard motors

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Just calm and politely answer.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in May 2024. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. Personal interview
  • Q2. Basic knowledge of mechanical subject

Interview Preparation Tips

Topics to prepare for Tata Steel Mechanical Engineer interview:
  • Mechanical Engineering
Interview preparation tips for other job seekers - Cement plant, mechanical engineer

ESL Steel Interview FAQs

How many rounds are there in ESL Steel Mechanical Engineer interview?
ESL Steel interview process usually has 1 rounds. The most common rounds in the ESL Steel interview process are One-on-one Round.
How to prepare for ESL Steel Mechanical Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at ESL Steel. The most common topics and skills that interviewers at ESL Steel expect are B.Tech, Civil Engineering, Coke, Construction and Diploma.
What are the top questions asked in ESL Steel Mechanical Engineer interview?

Some of the top questions asked at the ESL Steel Mechanical Engineer interview -

  1. What is Hydraulic system and it's componen...read more
  2. Explain steel making proce...read more

Tell us how to improve this page.

ESL Steel Mechanical Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
ESL Steel Mechanical Engineer Salary
based on 28 salaries
₹3.6 L/yr - ₹7.2 L/yr
27% more than the average Mechanical Engineer Salary in India
View more details

ESL Steel Mechanical Engineer Reviews and Ratings

based on 8 reviews

4.8/5

Rating in categories

4.8

Skill development

4.8

Work-life balance

4.8

Salary

4.8

Job security

4.8

Company culture

4.8

Promotions

4.8

Work satisfaction

Explore 8 Reviews and Ratings
Assistant Manager
226 salaries
unlock blur

₹5.3 L/yr - ₹16.5 L/yr

Associate Manager
134 salaries
unlock blur

₹6.5 L/yr - ₹17.5 L/yr

Senior Engineer
132 salaries
unlock blur

₹3.8 L/yr - ₹9.5 L/yr

Engineer
81 salaries
unlock blur

₹2.8 L/yr - ₹8.5 L/yr

Assistant Engineer
60 salaries
unlock blur

₹2.3 L/yr - ₹6 L/yr

Explore more salaries
Compare ESL Steel with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

Jindal Steel and Power

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview