Add office photos
Filter interviews by
Steel Authority Of India Mechanical Engineer Interview Questions and Answers
Steel Authority Of India Mechanical Engineer Interview Experiences
2 interviews found
I applied via Company Website and was interviewed in Apr 2024. There were 2 interview rounds.
Gear box replacement work
(6 Questions)
- Q1. Barring checking and replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and blumber block top cover open and old slue Barring remove and new slue...
- Ans.
Blumber block top cover open and old slue Barring remove and new slue Barring replace and nut tightening sure and blumber block top cover fixed and bolts nut tightening sure and paper work cancelled and conveyer belt running ok
- Q2. Motor replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old motor remove and new motor replace and bolts nut tightening s...
- Ans.
Bolt nut open and old motor remove and new motor replace and bolt nut tightening sure and Dayal gauge eliminate process ok and paper work cancelled and conveyer belt running ok
- Q3. V-scraper replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old v-scraper remove new v-scraper replace and bolts nut tigh...
- Q4. Discharge Chute replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old discharge chute remove and new discharge chute repl...
- Ans.
Bolt nut open and old discharge chute remove and new discharge chute replace and bolts nut tightening sure and paper work cancelled and conveyer belt running ok
- Q5. Barring Greasing work and safety first and all ppes sure and paper work and all pulley checking and savings greasing sure and paper work cancelled
- Q6. Gear box replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old gear box remove and new gear box replace and bolts nut tig...
Interview Preparation Tips
Selected
I applied via Referral and was interviewed before Jan 2023. There was 1 interview round.
(4 Questions)
- Q1. Why do you wanna join here.
- Q2. How does engine work
- Ans.
An engine works by converting fuel into mechanical energy through a series of combustion and mechanical processes.
Engines typically have cylinders where fuel is ignited and combustion occurs.
The combustion process creates high-pressure gases that push pistons, which in turn rotate the crankshaft.
The crankshaft converts the linear motion of the pistons into rotational motion.
This rotational motion is then transferred to...
- Q3. Function of flywheel
- Ans.
A flywheel is a mechanical device used to store rotational energy and provide stability to a system.
Stores kinetic energy and releases it when needed
Maintains rotational momentum
Provides stability and smooth operation
Used in various applications like engines, power plants, and energy storage systems
- Q4. Steel types and explain all
- Ans.
Steel types are classified based on their composition and properties.
Carbon Steel: Contains primarily carbon and iron. Examples include low carbon steel, medium carbon steel, and high carbon steel.
Alloy Steel: Contains additional elements such as manganese, nickel, chromium, or molybdenum to enhance properties. Examples include stainless steel, tool steel, and high-strength low-alloy steel.
Stainless Steel: Contains a m...
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Moula hussain.M
I applied via Walk-in and was interviewed in Nov 2024. There was 1 interview round.
(2 Questions)
- Q1. How to know if Hydraulic cylinder leakage
- Ans.
Check for hydraulic cylinder leakage by inspecting for oil puddles, decreased performance, and abnormal noises.
Inspect the area around the hydraulic cylinder for oil puddles or stains
Monitor the performance of the hydraulic system for any decrease in efficiency
Listen for any abnormal noises coming from the hydraulic cylinder during operation
- Q2. What is NAS
- Ans.
NAS stands for Network Attached Storage, which is a type of storage device that connects to a network to provide shared storage space.
NAS devices are typically used for storing and sharing files, data backups, and media streaming within a network.
NAS devices can be accessed by multiple users and devices simultaneously over a network.
NAS devices often have their own operating system and can run various applications such...
Interview Preparation Tips
Mechanical Engineer Interview Questions & Answers
ArcelorMittal Nippon Steel
Anonymous
posted on 18 Apr 2024
Selected
I applied via Recruitment Consulltant and was interviewed in Mar 2024. There were 4 interview rounds.
Gearbox and fluid coupling replacement work and development
Senior manager and manager and all employees job description for growth and development
Cash study in machanical engineering decision making thermodynamics fluid machanics and heat transfer
(11 Questions)
- Q1. Gear box replacement work safely first and all ppes sure and paper work and try out checking and saving and job work clean and fresh and tackup up and clamping conveyer belt old gear box replacement for ne...
- Q2. Barring checking and replacement work and safety first and all ppes sure and paper work and try out sure and teckup up and clamping conveyer belt and plummer block top cover open Barring checking and remov...
- Q3. Conveyer belt pmi roller checking work and safety first and all ppes sure and paper work and walked away clean and fresh and Roller cut marking frem number and belt tracking and belt close and try out sure...
- Q4. Barring greasing work and safety first and all ppes sure and paper work and conveyer belt running and walked away clean and fresh and grease gun and greasing work
- Q5. Conveyer belt panching work and safety first and all ppes sure and paper work and try out same position and solution and hardner bad mixed mad belt panching work
- Q6. Conveyer belt chute replacement work and safety first and all ppes sure and paper work and try out and jobs walked away clean and fresh and same chute replace and tightening bolt and machine welding and fi...
- Q7. Conveyer belt v-scraper replacement work and safety first and all ppes sure and paper work belt close and try out and walked away from clean and fresh and same v -scraper making and replacement work
- Q8. Gear box old oil replacement work and safety first and all ppes sure and paper work and belt close and try out and walked away clean and fresh and oil gauge and checking and drain oil and Aw320 oil replac...
- Q9. Fluid coupling oil replacement work and safety first and all ppes sure and paper work and try out lockout and tagout (loto) safety procedure and fuse plug and open west oil remove and new aw46oil replacem...
- Q10. Drive pmi work and safety first and all ppes sure and paper work and try out ofter walked away clean and fresh and bass bolt nut tightening work
- Q11. Gear box cleaning work and safety first and all ppes sure and paper work and walked away clean and fresh and ty out sure and clean and fresh and same process paper work cancelled and conveyer belt running...
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed in Mar 2024. There was 1 interview round.
(11 Questions)
- Q1. Gearbox and fluid coupling replacement work and Roller replacement work and exicider work
- Ans. Yes gear box . fluid Coupling and roller replacement work and exicider working and all conveyor work perfectly
- Q2. Gear box and fluid coupling
- Q3. Canvour safety work and neep point opening very competent work
- Q4. Canvour safety work bad and belt switch and pull code work
- Q5. Conveour and all work
- Q6. Gearl box and vibrating hopper Der screen work
- Q7. All people worker and safety tool box talk about conveour work
- Q8. Parmit formality and loto safety work
- Q9. Safety first shoes , helmet, google, dustmass, and etc
- Q10. Road safety formality work
- Q11. Running conveour gard work
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed in Jun 2024. There was 1 interview round.
(2 Questions)
- Q1. Process of production
- Q2. Final production process
Interview Preparation Tips
- Hot Forging
- Technical Support
- Testing Tools
- Production Planning
- ERP
I applied via Company Website
Safety first and prodction must
(3 Questions)
- Q1. All safety tool's and all ppes and machanical jobs clean and fresh but kids re start with the parmission
- Q2. Gear box question
- Q3. Fluid coupling and material of handling
(2 Questions)
- Q1. Any machanical jobs question
- Q2. But any machanical jobs question
Satyam Chandra
(2 Questions)
- Q1. What is Hydraulic system and it's components?
- Ans.
A hydraulic system uses fluid to transmit power and consists of components like pumps, cylinders, valves, and hoses.
Hydraulic pump: generates flow to the hydraulic system
Hydraulic cylinder: converts fluid power into mechanical power
Hydraulic valve: controls the flow and pressure of the fluid
Hydraulic hose: carries the fluid between components
- Q2. Explain steel making process?
- Ans.
Steel making process involves converting iron ore into steel through various stages like smelting, refining, and casting.
Iron ore is mined and transported to a steel mill.
The iron ore is smelted in a blast furnace to remove impurities and create molten iron.
The molten iron is then refined in a basic oxygen furnace or an electric arc furnace to adjust the carbon content and other alloying elements.
The refined molten iro...
Interview Preparation Tips
Selected
I applied via Walk-in
(3 Questions)
- Q1. Mechanical maintenance
- Q2. Any question in mechanical & hydraulics
- Q3. Any mechanical maintenance
Interview Preparation Tips
Mechanical Engineer Interview Questions & Answers
Shyam Steel Industries
Anonymous
posted on 13 Aug 2024
(2 Questions)
- Q1. Tell me about yourself
- Q2. Strength or weakness
Interview Preparation Tips
Steel Authority Of India Interview FAQs
Tell us how to improve this page.
Steel Authority Of India Interviews By Designations
- Steel Authority Of India Management Trainee Interview Questions
- Steel Authority Of India Mechanical Engineer Interview Questions
- Steel Authority Of India Apprentice Trainee Interview Questions
- Steel Authority Of India Assistant General Manager Projects Interview Questions
- Steel Authority Of India Assistant Manager Interview Questions
- Steel Authority Of India Assistant Manager Operations Interview Questions
- Steel Authority Of India Diploma Mechanical Engineer Interview Questions
- Steel Authority Of India Electrical & Instrumentation Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Mechanical Maintenance Engineer Interview Questions
- Diploma Mechanical Engineer Interview Questions
- Mechanical Technician Interview Questions
- Senior Engineer Mechanical Interview Questions
- Mechanical Supervisor Interview Questions
- Junior Mechanical Engineer Interview Questions
- Mechanical Fitter Interview Questions
- Mechanical Maintenance Fitter Interview Questions
- Show more
People are getting interviews through
Mechanical Engineer Interview Questions from Similar Companies
Fast track your campus placements
Steel Authority Of India Mechanical Engineer Reviews and Ratings
based on 4 reviews
Rating in categories
|
Manager
121
salaries
|  ₹10 L/yr - ₹30.4 L/yr |
|
Senior Manager
97
salaries
| ₹12 L/yr - ₹32.5 L/yr |
|
Assistant Manager
81
salaries
| ₹7.2 L/yr - ₹21.4 L/yr |
|
Deputy Manager
62
salaries
| ₹10 L/yr - ₹25 L/yr |
|
Assistant General Manager
61
salaries
| ₹12 L/yr - ₹36 L/yr |
Tata Steel
JSW Steel
ArcelorMittal Nippon Steel
Vizag Steel
Calculate your in-hand salary
- Home >
- Interviews >
- Steel Authority Of India Interview Questions >
- Steel Authority Of India Mechanical Engineer Interview Questions
