Upload Button Icon Add office photos

Jamna Auto Industries

Compare button icon Compare button icon Compare

Filter interviews by

Jamna Auto Industries Design Engineer Interview Questions and Answers

Updated 23 Jan 2025

Jamna Auto Industries Design Engineer Interview Experiences

2 interviews found

Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Drawing related questions
  • Q2. Technical
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. RELATED TO THEORY OF MACHINE DESIGN AND AUTOMOBILE
  • Q2. CURRENT WORK EXPERIENCE

Interview Preparation Tips

Interview preparation tips for other job seekers - Mostly job requirement is to be filled immediately, consider giving idea about minimum notice period

Design Engineer Interview Questions Asked at Other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel ... read more
Q2. what is the difference between lathe and milling machine?
Q3. What is design considerations to mske while designing a Part?
Q4. Which are the operations performed on sheet metal to increase the ... read more
Q5. WHAT IS GD&T IN MECHANICAL? DESCRIBLE ALL IN DETAILS .

Interview questions from similar companies

I applied via Naukri.com and was interviewed before Aug 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Technical questions related to your field,Software knowledge on which your working
  • Q2. Brief introduction about the company that your attending interview

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident,
Interview experience
1
Bad
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jul 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Design tool room
  • Q2. Tool room design
  • Q3. Mould maker design

Interview Preparation Tips

Interview preparation tips for other job seekers - Job for design
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Related to past experience and design.
  • Q2. Related to plastic products

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and not think too much.
Should be technical strong.
Interview experience
2
Poor
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Monster and was interviewed in Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Explain about u ?
  • Q2. Why u want this job?

Interview Preparation Tips

Interview preparation tips for other job seekers - Salary is less than industry
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in May 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Can you friendly with CREO software ?
  • Ans. 

    Yes, I am friendly with CREO software.

    • I have extensive experience using CREO software for designing and modeling.

    • I am proficient in creating 3D models, assemblies, and drawings using CREO.

    • I have successfully completed projects using CREO software in the past.

    • I am familiar with advanced features and functionalities of CREO software.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good environment for working

Skills evaluated in this interview

I applied via Company Website and was interviewed in Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Discuss about previous company & experience.
Round 3 - Technical 

(1 Question)

  • Q1. Technical question about role which you are applied.

Interview Preparation Tips

Interview preparation tips for other job seekers - This company takes the experience person of the same industry. Still these people shortlist resumes and call for technical interview. In which even after having a good knowledge of this role, his technical person says that we want only the person of the same industry.
Totally full waste of time.
My advice to HR team please confirm your technical team first before shortlist resume.
Please don't waste of time and hope people's.
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
No response

I applied via Recruitment Consulltant and was interviewed in Sep 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. Sheet metal defects?
  • Q2. What is k factor in sheet metal?
  • Ans. 

    K factor in sheet metal is a constant representing the ratio of the location of the neutral axis to the material thickness.

    • K factor determines how much a sheet metal part will stretch during bending.

    • It is used in calculating the bend allowance, bend deduction, and other bending-related calculations.

    • K factor values vary depending on the material type, thickness, and bending method.

    • For example, a K factor of 0.5 means th...

  • Answered by AI
  • Q3. Plastic molding machine?
  • Q4. Prevention plastic defects
Round 3 - Technical 

(5 Questions)

  • Q1. What is the role of npd person in industry?
  • Ans. 

    NPD person plays a crucial role in industry by leading the development of new products from concept to launch.

    • Responsible for identifying market opportunities and consumer needs

    • Leads cross-functional teams to develop new products

    • Coordinates with various departments such as marketing, engineering, and manufacturing

    • Manages the product development process from concept to commercialization

    • Ensures products meet quality stan...

  • Answered by AI
  • Q2. How to solve manufacturing issue?
  • Ans. 

    To solve a manufacturing issue, identify the root cause, brainstorm solutions, implement changes, and monitor results.

    • Identify the root cause of the issue by analyzing data and conducting tests.

    • Brainstorm potential solutions with a cross-functional team to gather diverse perspectives.

    • Implement changes based on the chosen solution, considering cost, time, and resources.

    • Monitor the results of the changes to ensure they e...

  • Answered by AI
  • Q3. What is current & voltage?
  • Ans. 

    Current is the flow of electric charge in a circuit, measured in Amperes (A). Voltage is the electrical potential difference between two points in a circuit, measured in Volts (V).

    • Current is the rate of flow of electric charge in a circuit

    • Voltage is the electrical potential difference between two points in a circuit

    • Current is measured in Amperes (A)

    • Voltage is measured in Volts (V)

    • Ohm's Law relates current, voltage, and

  • Answered by AI
  • Q4. Cad test on creo software version 7.0? 45 min cad test complete timing?
  • Q5. Written interview? 45 min. If any person are required this written interview test paper. Pls mail. My mail id is- *****

Interview Preparation Tips

Topics to prepare for UNO Minda Design Engineer interview:
  • New Product Development
  • Creo
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Case Study 

Nice but unfortunate to the living things

Round 2 - Technical 

(1 Question)

  • Q1. About Gantry automation and wittmann

Jamna Auto Industries Interview FAQs

How many rounds are there in Jamna Auto Industries Design Engineer interview?
Jamna Auto Industries interview process usually has 1-2 rounds. The most common rounds in the Jamna Auto Industries interview process are Resume Shortlist, One-on-one Round and Technical.
How to prepare for Jamna Auto Industries Design Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Jamna Auto Industries. The most common topics and skills that interviewers at Jamna Auto Industries expect are Solid Works, 3D Modeling, Design Engineering, Solid Edge and Agriculture.
What are the top questions asked in Jamna Auto Industries Design Engineer interview?

Some of the top questions asked at the Jamna Auto Industries Design Engineer interview -

  1. RELATED TO THEORY OF MACHINE DESIGN AND AUTOMOB...read more
  2. Drawing related questi...read more

Tell us how to improve this page.

Jamna Auto Industries Design Engineer Interview Process

based on 2 interviews

Interview experience

2
  
Poor
View more
Jamna Auto Industries Design Engineer Salary
based on 20 salaries
₹2.3 L/yr - ₹5.5 L/yr
17% less than the average Design Engineer Salary in India
View more details

Jamna Auto Industries Design Engineer Reviews and Ratings

based on 3 reviews

4.5/5

Rating in categories

3.8

Skill development

4.5

Work-life balance

3.0

Salary

4.8

Job security

3.0

Company culture

3.0

Promotions

4.7

Work satisfaction

Explore 3 Reviews and Ratings
Assistant Manager
80 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
62 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
57 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
38 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
31 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Jamna Auto Industries with

Bharat Forge

3.9
Compare

Sundaram Clayton

4.1
Compare

Rane Holdings

4.0
Compare

ZF Commercial Vehicle Control Systems

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview