30+ Genpact Interview Questions and Answers

To solve any problem for group discussion, one should listen actively, analyze the problem, suggest solutions, and encourage participation.

• Listen actively to understand the problem and perspectives of others.

• Analyze the problem by breaking it down into smaller parts and identifying the root cause.

• Suggest solutions based on the analysis and encourage others to do the same.

• Encourage participation by involving everyone in the discussion and valuing their input.

• Collaborate with t...read more

Electronics is the study of electrical circuits that involve active electrical components such as diodes, transistors, and integrated circuits.

• Diode: a two-terminal electronic component that allows current to flow in only one direction.

• PCB: a printed circuit board used to mechanically support and electrically connect electronic components.

• Transistor: a semiconductor device used to amplify or switch electronic signals.

• Oscillator: an electronic circuit that produces a periodic,...read more

The question is unclear and lacks context.

• The question needs to be rephrased or clarified.

• It is unclear what problem is being referred to.

• The 7 QC tools are used for quality control and problem-solving, but their application depends on the specific problem at hand.

The plastic resin used in our current company is ABS (Acrylonitrile Butadiene Styrene) manufactured by companies like LG Chem, Chi Mei Corporation, and Styrolution.

• ABS (Acrylonitrile Butadiene Styrene) is commonly used for its toughness, impact resistance, and heat resistance.

• LG Chem, Chi Mei Corporation, and Styrolution are some of the major manufacturers of ABS resin.

• Other commonly used plastic resins in the industry include PVC, polyethylene, and polypropylene.

Micrometre, vernier caliper, and height gauge are measuring instruments used in engineering.

• Micrometre is used to measure small distances with high precision.

• Vernier caliper is used to measure internal and external dimensions of objects.

• Height gauge is used to measure the height of objects and to check their flatness.

• All three instruments are commonly used in manufacturing and quality control processes.

• For example, a micrometre can be used to measure the thickness of a sheet ...read more

To achieve zero defects in my functional area, I focus on continuous improvement, training, and effective communication.

• Implementing quality control measures

• Conducting regular training sessions for team members

• Encouraging open communication to identify and resolve issues

• Analyzing data to identify areas for improvement

• Setting clear expectations and goals for the team

• Regularly reviewing processes and procedures to ensure they are effective

• Encouraging a culture of accountability...read more

MTC stands for Mold Temperature Control, Dehumidifier is used to reduce moisture in the air, Injection Molding defects can include warping, sink marks, and flash.

• Mold Temperature Control (MTC) is crucial for maintaining consistent part quality and reducing cycle times in injection molding.

• Dehumidifiers are used in injection molding facilities to prevent moisture from affecting the quality of the final product.

• Common injection molding defects include warping, sink marks, and f...read more

The parameter sheet needs to be filled with relevant technical information.

• Identify the parameters that need to be filled

• Gather the necessary technical information

• Ensure accuracy and completeness of the information

• Enter the information in the correct format and location

• Review and verify the entered information

A rotary pump is a type of positive displacement pump that uses rotating impellers to move fluid. A booster pump is used to increase the pressure of a fluid.

• Rotary pump uses rotating impellers to move fluid

• Booster pump is used to increase the pressure of a fluid

• Rotary pumps are commonly used in applications where a constant flow is required, such as in fuel transfer or hydraulic systems

• Booster pumps are often used in water supply systems to increase water pressure for distrib...read more

Fishbone diagram is a visual tool used to identify the possible causes of a problem.

• Also known as Ishikawa diagram or cause-and-effect diagram

• Used in quality control and process improvement

• Helps to identify the root cause of a problem by breaking it down into smaller categories

• Example: A fishbone diagram can be used to identify the possible causes of defects in a product

There are 2.54 centimeters in one inch.

• 1 inch is equal to 2.54 centimeters.

• To convert inches to centimeters, multiply the number of inches by 2.54.

• To convert centimeters to inches, divide the number of centimeters by 2.54.

A checksheet is used to collect and organize data for analysis and improvement.

• Helps identify patterns and trends in data

• Provides a visual representation of data

• Can be used to track progress towards goals

• Examples: tracking defects in a manufacturing process, recording customer complaints

Histogram is a graphical representation of data distribution.

• Histogram is used to represent the frequency distribution of continuous data.

• It consists of a series of bars, where the area of each bar represents the frequency of data in that interval.

• Histograms are commonly used in statistics, data analysis, and quality control.

• Example: A histogram can be used to show the distribution of heights in a population.

• Example: A histogram can be used to show the distribution of test sc...read more

To create a closed volume from a plastic part, consider the shape, dimensions, material properties, and manufacturing process.

• Consider the shape of the plastic part - it should be able to enclose a volume without any openings.

• Ensure the dimensions of the part allow for a complete enclosure of the desired volume.

• Select a plastic material that is suitable for creating a closed volume, such as ABS or polycarbonate.

• Choose a manufacturing process that can accurately produce the de...read more

An engine is a machine that converts fuel into motion. There are various types of engines such as internal combustion, steam, and electric.

• Types of engines include internal combustion, steam, electric, and gas turbine

• Examples of mechanical tools include wrenches, pliers, screwdrivers, hammers, and saws

• Moulding is a manufacturing process where a liquid or pliable material is poured into a mold and allowed to harden into a specific shape

4 stroke engines have 4 stages of operation while 2 stroke engines have only 2 stages of operation.

• 4 stroke engines have separate intake, compression, combustion, and exhaust strokes

• 2 stroke engines combine intake and compression in one stroke and combustion and exhaust in another

• Examples of mechanical tools include wrenches, pliers, screwdrivers, hammers, and sockets

• Clutch gear is a component that engages and disengages the transmission from the engine

Purchase activities involve identifying needs, selecting suppliers, negotiating contracts, placing orders, and managing supplier relationships.

• Identifying needs of the organization

• Selecting suppliers based on quality, price, and delivery time

• Negotiating contracts to ensure favorable terms and conditions

• Placing orders and ensuring timely delivery

• Managing supplier relationships to ensure ongoing quality and performance

• Maintaining accurate records of all purchase activities

Polycold is a type of cryogenic refrigeration system used in various industries.

• Polycold systems use a closed-loop refrigeration cycle to achieve ultra-low temperatures.

• They are commonly used in semiconductor manufacturing, aerospace testing, and research laboratories.

• Polycold systems are known for their high efficiency and reliability in maintaining precise temperature control.

• Examples of Polycold systems include the Polycold PFC-1100 and Polycold PFC-552.

The father of electricity is Benjamin Franklin.

• Benjamin Franklin is credited with discovering electricity through his famous kite experiment in 1752.

• He also invented the lightning rod, which protects buildings from lightning strikes.

• Franklin's work with electricity laid the foundation for modern electrical technology.

Abnormality condition refers to any deviation from the normal operating state or condition.

• Abnormality conditions can include equipment malfunctions, safety hazards, or unexpected events.

• Examples of abnormality conditions in operating engineering may include power outages, equipment breakdowns, or safety violations.

• It is important for operating engineers to quickly identify and address abnormality conditions to ensure the safety and efficiency of operations.

I prefer not to disclose my current CTC, but I am looking for a salary in line with industry standards and my experience.

• I am looking for a salary that is competitive with industry standards

• I am open to negotiation based on my experience and the responsibilities of the role

• I prefer not to disclose my current CTC as it is confidential information

The first role of shop floor 5S is to organize and standardize the work environment for improved efficiency and safety.

• Implementing a system for sorting, setting in order, shining, standardizing, and sustaining

• Creating designated areas for tools and equipment

• Regularly cleaning and maintaining workstations

• Training employees on 5S principles and practices

Quality control involves monitoring and maintaining standards to ensure products or services meet customer expectations.

• Quality control involves inspecting products or services to identify defects or deviations from standards

• It also involves implementing corrective actions to prevent defects from occurring in the future

• Quality control may include testing samples of products to ensure they meet specifications

• Documentation and record-keeping are important aspects of quality con...read more

A vernier is a scale or device used for making precise measurements or readings.

• A vernier is typically used in conjunction with a main scale or ruler to provide more accurate measurements.

• It consists of a sliding scale that is slightly smaller than the main scale and has finer divisions.

• By aligning the zero point of the vernier scale with a reference point on the main scale, the user can read the measurement with greater precision.

• Verniers are commonly used in various fields ...read more

Kilopascal is a unit of pressure in the metric system, equal to 1,000 pascals.

• Kilopascal is abbreviated as kPa.

• It is commonly used to measure pressure in various fields such as engineering, physics, and meteorology.

• 1 kilopascal is equal to 0.145 pounds per square inch (psi).

Manpower handling and 5S improvement are crucial for efficient paint shop operations.

• Effective manpower planning and allocation can ensure optimal utilization of resources.

• Implementing 5S principles can improve workplace organization, cleanliness, and safety.

• Regular training and communication can help employees understand and follow these practices.

• Examples of 5S improvements include reducing clutter, standardizing processes, and implementing visual management tools.

• Effective...read more

Newton's 1st law states that an object at rest will remain at rest and an object in motion will remain in motion with a constant velocity unless acted upon by an unbalanced force.

• An object will not change its state of motion unless acted upon by an external force

• This law is also known as the law of inertia

• Examples include a book on a table remaining at rest until someone picks it up or a car continuing to move forward until the brakes are applied

The first role of line set up is to establish the foundation for the entire operation.

• Ensure all equipment and materials are in place

• Follow safety protocols and guidelines

• Coordinate with team members for efficient workflow

8D is a problem-solving methodology used to identify, correct, and prevent recurring problems in a systematic way.

• 8D stands for Eight Disciplines and is commonly used in quality management.

• It involves a team-based approach to problem-solving, with each discipline representing a step in the process.

• The goal of 8D is to address the root cause of a problem and prevent its recurrence.

• Examples of the 8 disciplines include defining the problem, implementing short-term containment a...read more

My favorite place is a serene beach with crystal clear waters and golden sand.

• The beach is located in a tropical paradise

• The sound of the waves crashing against the shore is soothing

• The beach offers various water activities like snorkeling and surfing

• There are palm trees providing shade and hammocks for relaxation

• The sunset view from the beach is breathtaking

The atomic mass of Fe is 55.845 u.

• Fe is the chemical symbol for iron

• Atomic mass is the mass of an atom of an element

• Measured in unified atomic mass units (u)

Safety & is the practice of ensuring the well-being and protection of individuals from harm or danger.

• Safety & involves identifying and mitigating potential hazards in the workplace or environment.

• It includes implementing safety protocols and procedures to prevent accidents and injuries.

• Training employees on safety measures and providing necessary safety equipment is essential.

• Regular safety inspections and audits help maintain a safe environment.

• Emergency preparedness and re...read more

SOP stands for Standard Operating Procedure and SOS stands for Save Our Souls. SOP is a set of step-by-step instructions to help workers carry out routine operations. SOS is a distress signal used in emergencies.

• SOP is a document that outlines the steps to be followed for a particular task or process.

• SOS is a Morse code distress signal used to request help in emergency situations.

• SOP helps ensure consistency and quality in operations.

• SOS is commonly used by ships, aircraft, a...read more

AC stands for alternating current and DC stands for direct current.

• AC is an electric current that periodically reverses direction.

• DC is an electric current that flows in one direction.

• AC is commonly used in household electrical systems.

• DC is commonly used in batteries and electronic devices.

• AC can be converted to DC using a rectifier.

• DC can be converted to AC using an inverter.

A diode is an electronic component that allows current to flow in one direction and blocks it in the opposite direction.

• Diodes are commonly used in rectifier circuits to convert AC to DC.

• They have two terminals: an anode (positive) and a cathode (negative).

• When the voltage across a diode is forward-biased, it allows current to flow.

• When the voltage is reverse-biased, it blocks the current.

• Diodes can be made of different materials like silicon or germanium.

Production refers to the process of creating goods or services using resources such as labor, machinery, and raw materials.

• Production involves transforming inputs into outputs

• It can be in the form of manufacturing goods or providing services

• Efficiency and quality are important factors in production

• Examples include manufacturing cars in a factory, providing healthcare services in a hospital