Filter interviews by
I applied via Campus Placement and was interviewed in Mar 2023. There were 4 interview rounds.
Written test of Core subjects
I applied via Referral and was interviewed before Jul 2023. There was 1 interview round.
LMTD stands for Log Mean Temperature Difference. It is used in heat exchanger design to calculate the average temperature difference between hot and cold fluids.
LMTD is used to determine the overall heat transfer coefficient in a heat exchanger.
It is calculated using the formula: LMTD = (ΔT1 - ΔT2) / ln(ΔT1 / ΔT2)
LMTD helps in determining the required heat transfer area for a given heat exchanger design.
It is important...
Distillation is a process of separating components of a liquid mixture based on their boiling points.
Distillation involves heating a liquid mixture to create vapor, then cooling the vapor to collect the separated components.
Types of distillation include simple distillation, fractional distillation, and steam distillation.
Simple distillation is used to separate components with significantly different boiling points, whi...
To lineup a pump, ensure proper alignment of pump shaft with motor shaft and secure with coupling.
Check alignment of pump shaft and motor shaft
Use alignment tools like dial indicators to ensure accuracy
Secure alignment by adjusting motor position or shimming as needed
Install and tighten coupling to connect pump and motor shafts
To lineup an ejector, ensure proper alignment of components and connections for efficient operation.
Ensure all components are properly aligned according to manufacturer's specifications
Check for any obstructions or misalignments that may affect performance
Verify connections are secure and properly fitted to prevent leaks
Use alignment tools such as laser alignment systems for precision
Perform regular maintenance to ensu
To line up a heat exchanger, ensure proper alignment of inlet and outlet connections, support structures, and gaskets.
Ensure the inlet and outlet connections of the heat exchanger are properly aligned with the piping system.
Check that the support structures are in place and aligned correctly to bear the weight of the heat exchanger.
Verify that gaskets are installed correctly and in good condition to prevent leaks.
Use a...
30 Marketing Questions no Quant
Based on current issues on economy and international relations.
I applied via Naukri.com and was interviewed before May 2023. There were 2 interview rounds.
One hour test mainly from quant
India Glycols interview questions for popular designations
I applied via Referral and was interviewed before Jun 2023. There were 2 interview rounds.
Normal science test including math and reasoning
Different types of valves include ball valves, gate valves, globe valves, and check valves, each with specific uses in controlling flow.
Ball valves: used for on/off control without pressure drop
Gate valves: used for full flow or no flow applications
Globe valves: used for regulating flow in pipelines
Check valves: used to prevent backflow in piping systems
Get interview-ready with Top India Glycols Interview Questions
General aptitude test (logical reasoning, quant. Aptitude )
I was interviewed before Jan 2023.
I applied via Walk-in and was interviewed in Aug 2021. There was 1 interview round.
All equipment is operated according to standard operating procedures and safety guidelines.
Equipment manuals and standard operating procedures are followed
Safety guidelines are strictly adhered to
Regular maintenance and calibration of equipment is performed
Proper training and certification of operators is ensured
Emergency procedures are in place and practiced regularly
I applied via Naukri.com and was interviewed before Mar 2022. There was 1 interview round.
Bernoulli's theorem states that as the speed of a fluid increases, its pressure decreases.
It is a fundamental principle of fluid dynamics.
It is based on the conservation of energy in a fluid.
It is used to explain the behavior of fluids in pipes, nozzles, and wings.
It is also used in the design of carburetors, airplane wings, and water turbines.
Pumps are devices used to move fluids from one place to another. There are several types of pumps.
Centrifugal pumps
Positive displacement pumps
Axial flow pumps
Mixed flow pumps
Jet pumps
I applied via Walk-in and was interviewed in May 2021. There was 1 interview round.
pH is a measure of acidity or basicity of a solution. It is the negative logarithm of hydrogen ion concentration.
pH ranges from 0 to 14, with 7 being neutral
Acidic solutions have a pH less than 7, while basic solutions have a pH greater than 7
pH can be measured using a pH meter or pH paper
pH can also be calculated using the formula pH = -log[H+], where [H+] is the hydrogen ion concentration
Sorry, I need more context. Which acid are you referring to?
Please provide more information about the acid in question.
The question is incomplete. Please provide more context.
The name of the alcohol is not specified in the question.
More information is needed to answer the question.
The question should be clarified to specify which alcohol is being referred to.
Top trending discussions
The duration of India Glycols interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 26 interviews
Interview experience
based on 363 reviews
Rating in categories
Assistant Manager
73
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Engineer
66
salaries
| ₹0 L/yr - ₹0 L/yr |
Associate Manager
44
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Executive
38
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
36
salaries
| ₹0 L/yr - ₹0 L/yr |
Aarti Industries
Vinati Organics
Balaji Amines
Gujarat Alkalies & Chemicals