Hyundai Engineering Civil Engineer Interview Questions and Answers

To conduct a slump test, fill a metal cone with concrete, compact it, remove the cone, and measure the slump.

• Clean the cone and moisten it with water.

• Fill the cone with concrete in three layers, compacting each layer with a rod.

• Remove the cone and place it next to the slump.

• Measure the difference in height between the top of the cone and the highest point of the slump.

• Repeat the test at least twice and take the average

Minimum cement content for M25 Grade is 300 kg/m³.

• M25 grade concrete has a minimum compressive strength of 25 MPa.

• The water-cement ratio should not exceed 0.50.

• The cement content can vary based on factors such as aggregate size, shape, and grading.

• The cement content should be adjusted based on the results of trial mixes.

I expect a competitive salary based on industry standards and my experience.

• I have researched the industry standards for QA QC Engineer salaries

• I have taken into account my experience and skills

• I am open to negotiation based on the specific job responsibilities and benefits package

• I am looking for a fair and competitive salary that reflects my value to the company

I am Loganathan Gangadharan I Finished diploma in civil engineering with 10 years experience in Construction Field. Building background to eat not come down

The lapping length for a 12 mm steel rod used in construction is typically 60 times the diameter of the rod.

• Lapping length is usually 60 times the diameter of the steel rod

• For a 12 mm steel rod, the lapping length would be 12 mm x 60 = 720 mm

• Lapping is done to ensure continuity and strength in the reinforcement

In Oman, commonly used footings include spread footings, strip footings, and raft footings.

• Spread footings are used for individual columns or walls and distribute the load over a larger area.

• Strip footings are continuous footings that support a line of columns or walls.

• Raft footings are used for large or irregularly shaped structures to distribute the load over a wider area.

• In Oman, due to the sandy soil conditions, de...read more

To rectify a broken concrete floor, materials like concrete mix, epoxy resin, or self-leveling compound can be used.

• Use concrete mix to fill in the broken areas and level the floor.

• Apply epoxy resin to seal cracks and strengthen the floor.

• Consider using self-leveling compound for a smooth and even surface.

• Ensure proper preparation and cleaning of the floor before applying any material.

• Consult with a structural engineer

Concrete setting times can vary depending on factors like temperature and mix design.

• Concrete typically sets within 24-48 hours, but continues to harden over time.

• Factors affecting setting time include temperature, humidity, and mix design.

• For example, in hot weather, concrete may set faster, while in cold weather it may take longer.

• Accelerators or retarders can be added to the mix to adjust setting times as needed.

Process of variation involves documenting and analyzing changes in project scope, cost, or schedule.

• Variations are changes to the original scope, cost, or schedule of a project

• Variations must be documented and approved by the relevant parties

• The impact of variations on project budget and timeline must be analyzed

• Examples of variations include design changes, unforeseen site conditions, and client requests