Filter interviews by
I applied via Campus Placement and was interviewed in Nov 2023. There was 1 interview round.
Stress and strain are measures of the internal forces within a material. Stress is the force applied per unit area, while strain is the deformation of the material.
Stress is the force applied per unit area on a material, measured in units like Pascals or pounds per square inch.
Strain is the deformation or change in shape of a material due to stress, measured as a ratio of the change in length to the original length.
Str...
Fatigue failure is the weakening and eventual breaking of a material under repeated or fluctuating stress.
Occurs due to repeated or fluctuating stress on a material
Can lead to cracks, fractures, or complete failure
Common in metal structures like bridges, aircraft, and machinery
Static loads do not change with time, while dynamic loads involve at least one changing parameter. Fatigue failure occurs when a body is subjected to continuous dynamic loading.
Static loads have constant force magnitude, direction, and point of application
Dynamic loads involve changes in at least one of the load parameters over time
Fatigue failure occurs when a body is subjected to continuous dynamic loading, leading t...
NPSH of a pump stands for Net Positive Suction Head, which is a measure of the pressure available at the suction port of the pump.
NPSH is important for determining if a pump will operate properly without cavitation.
It is calculated by subtracting the vapor pressure of the fluid from the total suction head of the pump.
NPSH is typically provided by the pump manufacturer and must be greater than the required NPSH for the
I applied via Newspaper Ad and was interviewed in Oct 2023. There were 2 interview rounds.
I applied via Referral and was interviewed before Nov 2022. There were 4 interview rounds.
Introduction & Experience Job Related
Access control sistam
Software related questions
I was interviewed before Feb 2021.
Assignment is transfer of rights or property from one party to another.
Options Assignment occur when option buyers exercise their rights to a position in a security.
Other examples of assignments can be found in wages, mortgages and leases.
Civil engineering is the design, construction, and maintenance of infrastructure and buildings.
Civil engineers design and oversee the construction of roads, bridges, buildings, and other infrastructure.
They ensure that structures are safe, functional, and meet environmental and regulatory standards.
Civil engineers also maintain and repair existing infrastructure to ensure it remains safe and functional.
Examples of civi...
HPCL Rajasthan Refinery interview questions for popular designations
Top trending discussions
I was interviewed before Aug 2021.
2 easy codes and 1 medium level code challenge
I know multiple programming languages including Java, Python, and C++.
Proficient in Java, Python, and C++
Familiar with HTML, CSS, and JavaScript
Experience with SQL and NoSQL databases
Comfortable with Bash scripting and Linux command line
Knowledge of MATLAB and R for data analysis
Understanding of Swift for iOS development
I applied via LinkedIn and was interviewed before Sep 2021. There were 2 interview rounds.
Paper divided in two sections. First section has four parts and second section is of coding questions.
posted on 29 Dec 2015
I want to join TECH-M because of their innovative projects and strong reputation in the industry.
Innovative projects at TECH-M attract me
Strong reputation in the industry
Opportunities for growth and learning
Positive reviews from current employees
Yes, I completed a project on designing a solar-powered irrigation system to improve water efficiency in agriculture.
Designed a solar-powered irrigation system to reduce dependency on grid electricity
Implemented sensors to monitor soil moisture levels and automate watering
The purpose was to improve water efficiency in agriculture and reduce operational costs
Conducted field tests to validate the system's effectiveness
Pr...
The project can be modified by identifying the areas that need improvement and implementing changes accordingly.
Identify the areas that need improvement
Analyze the impact of the proposed modifications
Ensure that the modifications align with the project goals
Communicate the modifications to all stakeholders
Implement the modifications and monitor their effectiveness
LED logic refers to the way in which light emitting diodes function and produce light.
LEDs are semiconductor devices that emit light when a current is passed through them
They have a positive and negative terminal, and the current flows from the positive to the negative terminal
The color of the light emitted depends on the material used in the LED
LEDs are commonly used in lighting, displays, and indicators
Yes, I am flexible with both location and job timings.
I am open to relocating for the job if required
I am willing to adjust my schedule to meet the job timings
I understand the importance of flexibility in a new role
Yes, I visited the TECH-M website and found their interactive virtual tour to be the most catchy feature.
Interactive virtual tour is engaging and informative
User-friendly interface makes navigation easy
Wide range of products and services showcased
Testimonials and case studies provide credibility
Yes, there may be limitations in terms of experience, knowledge, resources, and regulations for a sector that I would be allotted.
Experience: I may have limited experience in a particular sector which could impact my performance.
Knowledge: I may not have in-depth knowledge about certain aspects of the sector, leading to limitations in decision-making.
Resources: Limited resources such as budget, manpower, or technology ...
TECH-M is a leading company in the engineering industry known for its innovative projects and supportive work culture.
TECH-M has a strong reputation for cutting-edge technology and innovation.
The company offers excellent training and development opportunities for graduate engineers.
TECH-M has a supportive work culture that encourages growth and collaboration.
The company has a track record of successful projects in vari...
Centripetal force pulls an object towards the center of a circular path, while centrifugal force pushes an object away from the center.
Centripetal force is directed towards the center of rotation, while centrifugal force is directed away from the center.
Centripetal force is responsible for keeping an object in circular motion, while centrifugal force is experienced by the object moving in a circular path.
Centripetal fo...
My favorite subject in 11th and 12th was Physics.
I enjoyed learning about the laws of motion and how they apply to real-life situations.
Physics helped me understand the world around me better and sparked my interest in engineering.
I excelled in topics like electricity, magnetism, and optics.
Practical experiments in Physics labs were always fascinating to me.
A vernier caliper is a measuring tool used to measure the internal and external dimensions of an object with high accuracy.
Consists of two jaws, one fixed and one movable
Has a main scale and a vernier scale for precise measurements
Can measure length, depth, and thickness
Used in engineering, machining, and woodworking
Example: measuring the diameter of a bolt or the thickness of a sheet of metal
The laws of motion describe the behavior of objects in motion.
The first law states that an object at rest will remain at rest, and an object in motion will remain in motion at a constant velocity, unless acted upon by an external force.
The second law states that the force acting on an object is equal to its mass times its acceleration.
The third law states that for every action, there is an equal and opposite reaction.
E...
Yes, I am open to relocating for the right opportunity.
I am willing to relocate for career growth and new experiences.
I have no ties that would prevent me from moving to a new location.
I am excited about the prospect of living in a new city or country.
I understand that relocation may be necessary for certain job opportunities.
I was interviewed before Apr 2020.
Code for calculating the area of a triangle.
Take the base and height of the triangle as input from the user.
Multiply the base and height and divide the result by 2.
Print the result as the area of the triangle.
based on 9 interviews
Interview experience
based on 28 reviews
Rating in categories
Assistant Engineer
10
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
9
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Manager
7
salaries
| ₹0 L/yr - ₹0 L/yr |
Project Engineer
6
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Project Engineer
6
salaries
| ₹0 L/yr - ₹0 L/yr |
Indian Oil Corporation
Bharat Petroleum
Reliance Industries
Hindustan Petroleum