Upload Button Icon Add office photos

Filter interviews by

Hirotec Interview Questions and Answers

Updated 24 Jun 2024

Hirotec Interview Experiences

Popular Designations

7 interviews found

Interview experience
4
Good
Difficulty level
-
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in May 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Will be about your previous work experience
Round 3 - Technical 

(1 Question)

  • Q1. About Planning process
Round 4 - Technical 

(1 Question)

  • Q1. About Project management

Project Engineer Interview Questions asked at other Companies

Q1. Triangle Star Pattern Task Your task is to print a triangle pattern using stars (*) for a given integer N, which represents the number of rows. Input: Integer N (Total number of rows) Output: The triangle pattern printed over N lines Exampl... read more
View answer (12)

Rate your
company

🤫 100% anonymous

How was your last interview experience?

Share interview
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. Tell me about yourself

Interview Preparation Tips

Interview preparation tips for other job seekers - Good

Mechanical Engg. Design Interview Questions asked at other Companies

Q1. What are the Drawing softwares you're aware of And How much relevant experience you have in for each software
View answer (3)
Hirotec Interview Questions and Answers for Freshers
illustration image
Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Need mechanical Design maintance 

(2 Questions)

  • Q1. Catia software installation
  • Q2. Ad user creation

Interview Preparation Tips

Interview preparation tips for other job seekers - Racism - Pre determined during selection process.

Senior System Administrator Interview Questions asked at other Companies

Q1. How to stop IIS Service? What is CDN? What are the reason 502 bad gateway error? What is FSMO and How many type of roles? What is Group Policy and how many object? When do we use WDN? What are the different b/w Forest, Threes and Domains?
View answer (2)
Round 1 - Technical 

(1 Question)

  • Q1. Related BIW field & if we know NX that will added advantage
Round 2 - HR 

(1 Question)

  • Q1. Mostly general questions only.have to speak boldly

Interview Preparation Tips

Interview preparation tips for other job seekers - Just talk boldly..
If u know NX or catia, that is preferred

Senior Design Engineer Interview Questions asked at other Companies

Q1. Noise, Vibration, and Harshness (NVH) in gearboxes are influenced by several factors, which can broadly be categorized into design, material, manufacturing, and operational factors. Here are some key factors affecting NVH in gearboxes: ### ... read more
View answer (1)

Hirotec interview questions for popular designations

 Robotics Engineer

 (1)

 Senior System Administrator

 (1)

 Project Engineer

 (1)

 Project Control Engineer

 (1)

 Design Engineer

 (1)

 Senior Design Engineer

 (1)

 Mechanical Engg. Design

 (1)

Round 1 - Aptitude Test 

General aptitude and logical reasoning

Round 2 - Technical 

(1 Question)

  • Q1. Robot basics and operation

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well. Gather basic knowledge about robotics.

Robotics Engineer Interview Questions asked at other Companies

Q1. Difference between Deep Learning and Reinforcement Learning, scenario where each should be preferred or not preferred.
View answer (1)

Design Engineer Interview Questions & Answers

user image Sri Hari SJ

posted on 23 Jan 2023

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Jan 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all Resume tips
Round 2 - Aptitude Test 

General aptitude test is conducted.

Round 3 - Technical 

(3 Questions)

  • Q1. Iso to ortho conversion and ortho to iso conversion test is conducted
  • Q2. Basic Engineering Mechanics questions were asked
  • Q3. You will be asked to sign bonds if you are a fresher

Interview Preparation Tips

Interview preparation tips for other job seekers - Excellent company for freshers. NX and Catia were used

Design Engineer Interview Questions asked at other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel engine and Diesel in petrol engone.
View answer (5)

I applied via Referral and was interviewed before Sep 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Online teams interview 

(3 Questions)

  • Q1. Explain in interview what you done in previusly.if they said you have done wrong ,eventhough it is correct yhen just accept it and always make your eye contact and almost you will be selected
  • Q2. Techniacally there is some qtn paper, dol connection,and iperation,batch pgm logic,e stop,push button logic ,stop and start pump using one button,basic electical and power calculation, resistance calculati...
  • Q3. Tell about your self
Round 3 - HR 

(1 Question)

  • Q1. Nothing share personal details and show your boldness towards her.you will be selected

Interview Preparation Tips

Topics to prepare for Hirotec Project Control Engineer interview:
  • Search all basic and make up yourself
Interview preparation tips for other job seekers - Only one thing ,they will make you wait and will check your patience for whole day

Project Control Engineer Interview Questions asked at other Companies

Q1. What are the 14 points of the DCMA (Defense Contract Management Agency)?
View answer (1)

Interview questions from similar companies

I was interviewed before May 2016.

Interview Preparation Tips

Round: Test
Duration: 1 hour
Total Questions: 90

Round: Group Discussion
Duration: 20 minutes

Interview Preparation Tips

Round: Test
Experience: more of experience gaining and learning new tricks of codding a program.
Tips: must focus on bugging and debugging the program.
Duration: 60 mins minutes

Skills: Coding Skills,
College Name: Invertis university
Motivation: bosch is a multinational company stating its rank worldwide.so anyone would to work with outstanding company.

Interview Questionnaire 

16 Questions

  • Q1. Explain about the projects you have done, have you done them for curriculum or out of interest?
  • Ans. 

    I have done several projects both for curriculum and out of interest.

    • Developed a web application for a college project using HTML, CSS, and JavaScript.

    • Created a mobile app for tracking expenses using React Native out of interest.

    • Built a chatbot using Python for a hackathon project.

    • Developed a website for a local business using WordPress for a freelance project.

    • Created a game using Unity for a personal project.

  • Answered by AI
  • Q2. What are your favourite subjects?
  • Ans. 

    My favorite subjects are computer science, mathematics, and physics.

    • Computer Science: I enjoy programming and learning about algorithms and data structures.

    • Mathematics: I find solving complex problems and equations very satisfying.

    • Physics: I am fascinated by the laws of nature and how they govern the universe.

  • Answered by AI
  • Q3. Draw the block diagram, and explain all the components of 8051 micro-controller
  • Ans. 

    The 8051 micro-controller consists of CPU, RAM, ROM, Timers, Serial Port, Interrupts, and I/O ports.

    • The CPU is the main processing unit of the micro-controller.

    • The RAM is used for storing data temporarily.

    • The ROM contains the program code that is executed by the CPU.

    • The Timers are used for generating precise time delays.

    • The Serial Port is used for communication with other devices.

    • The Interrupts are used for handling ex...

  • Answered by AI
  • Q4. Difference between Micro-controller and Microprocessor
  • Ans. 

    Microprocessors are general-purpose CPUs while microcontrollers are designed for specific tasks.

    • Microprocessors are used in computers, smartphones, and other devices that require complex processing.

    • Microcontrollers are used in embedded systems, such as home appliances, automotive systems, and medical devices.

    • Microprocessors have separate memory and I/O interfaces while microcontrollers have them integrated on a single ...

  • Answered by AI
  • Q5. What are Von Neumann and Harvard classifications, which does 8051 belong to?
  • Ans. 

    Von Neumann and Harvard are computer architecture classifications. 8051 belongs to Harvard architecture.

    • Von Neumann architecture has a single memory space for data and instructions, while Harvard architecture has separate memory spaces for data and instructions.

    • 8051 microcontroller uses Harvard architecture as it has separate memory spaces for program instructions and data.

    • Harvard architecture allows simultaneous acces...

  • Answered by AI
  • Q6. How many bit is data bus and how many is address bus, also if there are 8 lines how many memory locations are present?
  • Q7. What are interrupts? Explain in detail what happens in 8051 when there is interrupt, What happens when there is an interrupt within an interrupt?
  • Ans. 

    Interrupts are signals that temporarily halt the execution of a program to handle a specific event.

    • When an interrupt occurs in 8051, the program counter is saved on the stack and the interrupt service routine (ISR) is executed.

    • The ISR handles the interrupt and then returns control to the main program by restoring the program counter from the stack.

    • If an interrupt occurs while another interrupt is being serviced, the se...

  • Answered by AI
  • Q8. Where is the location of current line of execution stored when there is an interrupt?
  • Ans. 

    The location of current line of execution is stored in the stack when there is an interrupt.

    • When an interrupt occurs, the processor saves the current state of execution on the stack.

    • The location of the current line of execution is stored in the program counter (PC) register.

    • The PC register is pushed onto the stack along with other registers.

    • After the interrupt is serviced, the processor pops the saved state from the st

  • Answered by AI
  • Q9. Draw basic logic gates
  • Ans. 

    Logic gates are basic building blocks of digital circuits. They perform logical operations on inputs to produce outputs.

    • AND gate: output is 1 only if both inputs are 1

    • OR gate: output is 1 if either input is 1

    • NOT gate: output is the opposite of the input

    • NAND gate: output is 0 only if both inputs are 1

    • NOR gate: output is 0 if either input is 1

    • XOR gate: output is 1 if inputs are different

    • XNOR gate: output is 1 if inputs a

  • Answered by AI
  • Q10. Draw half adder without using EXOR gate , draw full adder without EXOR
  • Ans. 

    Draw half adder and full adder without using EXOR gate.

    • Half adder can be implemented using AND and OR gates

    • Full adder can be implemented using two half adders and an OR gate

    • In half adder, sum is obtained by ORing two inputs and carry is obtained by ANDing two inputs

    • In full adder, sum is obtained by using two half adders and an OR gate, and carry is obtained by ANDing three inputs

  • Answered by AI
  • Q11. Given an input string, remove spaces and give me output string
  • Ans. 

    Remove spaces from input string and return output string

    • Iterate through each character of the input string

    • If the character is not a space, add it to the output string

    • Return the output string

  • Answered by AI
  • Q12. Tell me about yourself
  • Ans. 

    I am a software engineer with experience in developing web applications and a passion for learning new technologies.

    • Graduated with a degree in Computer Science

    • Proficient in programming languages such as Java, Python, and JavaScript

    • Experience in developing web applications using frameworks like React and Angular

    • Passionate about learning new technologies and keeping up with industry trends

  • Answered by AI
  • Q13. Family background ( what does your father do ?, what does your mother do?, etc)
  • Ans. 

    My father is a businessman and my mother is a homemaker.

    • My father runs a small business in our hometown.

    • My mother takes care of the household and our family.

    • My parents have always been supportive of my education and career goals.

  • Answered by AI
  • Q14. Why Bosch?
  • Ans. 

    Bosch is a renowned company with a strong focus on innovation and sustainability.

    • Bosch has a reputation for being a leader in innovation and technology.

    • The company has a strong commitment to sustainability and social responsibility.

    • Bosch offers a diverse range of products and services, providing opportunities for growth and development.

    • The company has a global presence, offering the chance to work with people from diff

  • Answered by AI
  • Q15. What did you understand from yesterday's presentation?
  • Ans. 

    I understood the main points of the presentation.

    • The presentation covered the new software development process.

    • It emphasized the importance of collaboration between teams.

    • It also highlighted the need for continuous testing and feedback.

    • I learned about the new tools and technologies that will be used.

    • Overall, I found the presentation informative and useful.

  • Answered by AI
  • Q16. What are your plans for higher studies?
  • Ans. 

    I plan to pursue higher studies in computer science to enhance my skills and knowledge.

    • I am interested in pursuing a Master's degree in Computer Science.

    • I am also considering taking online courses to learn new technologies and programming languages.

    • I plan to attend workshops and conferences to stay updated with the latest trends in the industry.

    • I believe that continuous learning is essential to stay competitive in the

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: The technical section consisted of questions different branches. I shall answer from ECE point of view. The test had same questions for electrical cluster , ie ECE ,EEE, IT,TC . There were 35 questions in this section. The questions were based on subjects in 1st 2nd and 3rd year. Mainly concentrated on DEC, AEC, Micro-controllers, Control systems and a few basic electronics questions as well. This section also had 5 questions on programming as well. The test also had negative marking. +1 and -0.25 was the scheme. The second aptitude section had 25 questions on logical reasoning, data interpretation.
Tips: Answer only those questions which you are confident about the answer.
Duration: 60 minutes
Total Questions: 60

Round: Technical Interview
Experience: The interview started on a tensing note, but he told me to make myself comfortable. He was more interested in how I would approach the problem rather than the syntax or trivialities of the code. He tried to confuse me even when my answer was correct. The interview went on for 30-40 mins. At the end of which the interviewer gave me a HR form to fill, and told me to proceed to the HR interview.
Tips: Be confident and do not say things you don't know about, many of my friends got rejected for bluffing.

Round: HR Interview
Experience: The interviewer had a stern expression on his face, and was serious throughout the interview. He asked me why i had done a C++ project though i was from a ECE background, ( I explained that I had taken an elective OOPS which required us to do a mini project as a part of our curriculum). He also asked what i know about Bosch, this is a definite question, prepare well for it.
Tips: Be confident and truthful, do not bluff about anything. They are well trained to detect those anomalies.

General Tips: Prepare the subjects of second year and third year well. Do not panic in the interview, answer the questions to the point.
Skill Tips: Revise your understanding of your projects thoroughly.
Skills: Knowledge about microcontrollers, Knowledge about AEC and DEC basics, Some knowledge about Control systems, Thorough understanding about the projects pursued.
College Name: BMS College Of Engineering, Bangalore
Motivation: Bosch is one of the pioneers in the embedded systems domain. Also I had heard very good reviews from my seniors about the company.

Skills evaluated in this interview

Contribute & help others!
anonymous
You can choose to be anonymous

Hirotec Interview FAQs

How many rounds are there in Hirotec interview?
Hirotec interview process usually has 2-3 rounds. The most common rounds in the Hirotec interview process are Technical, Resume Shortlist and HR.
How to prepare for Hirotec interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Hirotec. The most common topics and skills that interviewers at Hirotec expect are Automotive Engineering, C#, CATIA, Sheet Metal and .Net.
What are the top questions asked in Hirotec interview?

Some of the top questions asked at the Hirotec interview -

  1. Techniacally there is some qtn paper, dol connection,and iperation,batch pgm lo...read more
  2. Iso to ortho conversion and ortho to iso conversion test is conduc...read more
  3. Nothing share personal details and show your boldness towards her.you will be s...read more

Recently Viewed

DESIGNATION

JOBS

Browse jobs

Discover jobs you love

SALARIES

HARMAN

Tell us how to improve this page.

Hirotec Interview Process

based on 6 interviews

Interview experience

4.2
  
Good
View more

Anonymously discuss salaries, work culture, and many more

Get Ambitionbox App

Interview Questions from Similar Companies

Bosch Interview Questions
4.2
 • 331 Interviews
Varroc Group Interview Questions
3.6
 • 176 Interviews
UNO Minda Interview Questions
4.0
 • 169 Interviews
Bharat Forge Interview Questions
3.9
 • 55 Interviews
Rane Group Interview Questions
4.0
 • 9 Interviews
View all

Hirotec Reviews and Ratings

based on 84 reviews

3.8/5

Rating in categories

3.6

Skill development

3.3

Work-life balance

3.4

Salary

4.3

Job security

3.3

Company culture

2.9

Promotions

3.5

Work satisfaction

Explore 84 Reviews and Ratings
Design Engineer
87 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Design Engineer
29 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Team Lead
22 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Project Engineer
16 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Robotics Engineer
13 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Hirotec with

Bharat Forge

3.9
Compare

Samvardhana Motherson Group

3.7
Compare

Sundaram Clayton

4.1
Compare

Rane Group

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview