Hamptons International Interview Questions and Answers for Freshers

Q1. Technical questions
Add your answer
Q2. Creep time to you
Add your answer
Q3. Go to your home
Add your answer

Q1. Tell me about yourself
Add your answer

Q1. Asked about HT, LT Panels, Relays, Circuit breakers, transformers and its types
Add your answer

Q1. This was with the VP and it was both technical and kind of like HR. Here he will ask where you want to get posted.
Add your answer

Q1. This was with the senior hr. He told me that the trend they see is that these freshers will leave after one month cause they cant handle the pressure and all. So they wont give experience certificate unles...read more
Add your answer

Q1. Salary discussion,etc
Add your answer

Q1. RCC and finishing related
Add your answer

Tell something about yourself.

Q1. What is HVAC .
Ans. 
HVAC stands for Heating, Ventilation, and Air Conditioning. It refers to the technology of indoor environmental comfort.
• HVAC systems control temperature, humidity, and air quality in buildings.

• Heating can be provided through furnaces, boilers, or heat pumps.

• Ventilation involves exchanging indoor and outdoor air to improve air quality.

• Air conditioning systems use refrigeration to cool indoor air.

• HVAC systems are essenti...read more
Answered by AI
Add your answer
Q2. Explained about Fire fighting system.
Add your answer
Q3. What is plumbing system
Ans. 
Plumbing system refers to the network of pipes, fixtures, and fittings that deliver water and remove waste in a building.
• Plumbing systems include pipes for water supply, drainage, and venting

• Fixtures such as sinks, toilets, showers, and bathtubs are connected to the plumbing system

• Plumbing systems also include valves, pumps, water heaters, and other equipment

• Proper installation and maintenance of plumbing systems are e
Answered by AI
Add your answer
Q4. Explai About FM 200
Ans. 
FM 200 is a clean agent fire suppression system commonly used in data centers and other critical facilities.
• FM 200 is a colorless, odorless gas that is stored in cylinders and discharged into the protected space in the event of a fire.

• It works by reducing the oxygen levels in the air to a point where combustion is no longer sustainable.

• FM 200 is non-toxic and leaves no residue, making it ideal for use in areas with sen...read more
Answered by AI
Add your answer
Q5. Working of LT panel room and work sequence.
Ans. 
LT panel room is a crucial part of electrical systems, housing electrical components for power distribution.
• LT panel room is where the electrical distribution board is located for controlling and distributing power to various circuits.

• Work sequence involves checking the incoming power supply, monitoring the load requirements, and ensuring proper distribution of power.

• Regular maintenance and inspection of LT panel room ...read more
Answered by AI
Add your answer

Q1. TECHNICAL QUESTIONS ABOUT PAST JOB ROLE
Add your answer
Q2. WORKEXPERIENCE
Add your answer

Electrical and maintanance

Q1. Types of chiller
Ans. 
There are several types of chillers used in facilities, including air-cooled, water-cooled, absorption, and centrifugal chillers.
• Air-cooled chillers use air to remove heat from the refrigerant.

• Water-cooled chillers use water to remove heat from the refrigerant.

• Absorption chillers use a heat source, such as natural gas or steam, to drive the refrigeration cycle.

• Centrifugal chillers use centrifugal force to compress the
Answered by AI
Add your answer
Q2. DG, HVAC, UPS, PAC, BMS Documents Reports etc
Add your answer
Q3. What are the checks and frequency of DG
Ans. 
Regular checks and maintenance are essential for ensuring the proper functioning of DG (Diesel Generator) systems.
• Daily visual inspections for leaks, damages, and loose connections.

• Weekly checks for fuel levels, coolant levels, and battery condition.

• Monthly load testing to ensure the generator can handle the required load.

• Annual maintenance including oil and filter changes, spark plug replacement, and thorough cleaning...read more
Answered by AI
Add your answer
Q4. What is the UPS and Types of UPS
Ans. 
UPS stands for Uninterruptible Power Supply. There are three types of UPS: standby, line-interactive, and online.
• UPS stands for Uninterruptible Power Supply.

• UPS provides backup power to critical equipment during power outages or fluctuations.

• The three types of UPS are standby, line-interactive, and online.

• Standby UPS switches to battery power when the main power source fails.

• Line-interactive UPS regulates voltage fluct...read more
Answered by AI
Add your answer
Q5. What is the safety prications of before working working
Ans. 
Safety precautions before working
• Conduct a thorough risk assessment of the work area

• Ensure all necessary personal protective equipment (PPE) is available and worn

• Implement proper training and education on safety procedures

• Inspect and maintain tools and equipment regularly

• Establish emergency response plans and procedures

• Promote a culture of safety and encourage reporting of hazards or incidents
Answered by AI
Add your answer
Q6. What are the safety measurements of UPS
Ans. 
UPS (Uninterruptible Power Supply) safety measures include surge protection, battery backup, and automatic voltage regulation.
• Surge protection safeguards electronic devices from power surges or spikes.

• Battery backup provides temporary power during outages, preventing data loss or equipment damage.

• Automatic voltage regulation stabilizes voltage levels, protecting equipment from fluctuations.

• UPS systems may have audible ...read more
Answered by AI
Add your answer
Q7. How to maintan the Trasformer
Ans. 
To maintain a transformer, regular inspections, cleaning, and testing are necessary.
• Perform regular visual inspections to check for any signs of damage or leaks.

• Clean the transformer regularly to remove dust, dirt, and debris.

• Test the transformer's insulation resistance to ensure it is within acceptable limits.

• Monitor the transformer's temperature and oil levels regularly.

• Perform oil analysis to detect any potential is...read more
Answered by AI
Add your answer
Q8. What types of work permets is there
Add your answer
Q9. What is 52 week shadule
Ans. 
A 52-week schedule is a plan that outlines tasks, events, or milestones for each week of a year.
• A 52-week schedule helps in organizing and managing tasks throughout the year.

• It can be used in various industries such as project management, event planning, and manufacturing.

• Each week of the schedule may include specific goals, deadlines, or activities.

• Examples of 52-week schedules include construction project timelines, ...read more
Answered by AI
Add your answer
Q10. What is difference between chiller and PAC
Ans. 
A chiller is a refrigeration system used to cool large spaces, while a PAC (Portable Air Conditioner) is a compact unit used for localized cooling.
• Chillers are typically used in commercial or industrial settings to cool large areas such as office buildings or factories.

• PACs are smaller and more portable, designed to cool specific areas or rooms.

• Chillers use a refrigeration cycle to remove heat from the air or water, wh...read more
Answered by AI
Add your answer
Q11. Which type of fire Extingusher used in server room
Ans. 
A clean agent fire extinguisher is typically used in server rooms.
• Clean agent fire extinguishers are designed to suppress fires without leaving residue or damaging sensitive equipment.

• They use chemicals like halon, carbon dioxide, or clean agents like FM-200 or Novec 1230.

• These extinguishers are effective in suppressing fires involving electrical equipment and are safe for use in server rooms.

• It is important to consult...read more
Answered by AI
Add your answer
Q12. What is the 6S
Ans. 
6S is a workplace organization methodology that focuses on creating a clean, efficient, and safe environment.
• 6S stands for Sort, Set in Order, Shine, Standardize, Sustain, and Safety.

• It is derived from the 5S methodology and adds an additional focus on safety.

• Sort involves removing unnecessary items from the workplace.

• Set in Order involves organizing and arranging necessary items in a logical manner.

• Shine refers to cle...read more
Answered by AI
Add your answer

Q1. How are you Anil?
Add your answer
Q2. Is this right to talk?
Add your answer

Q1. Please write down the sequence of works of construction and so on.
Ans. 
The sequence of works in construction typically involves planning, site preparation, foundation work, structural construction, finishing touches, and final inspection.
• Planning: Develop project plans, obtain permits, and create a timeline.

• Site preparation: Clear the site, set up temporary facilities, and install utilities.

• Foundation work: Excavate, pour footings, and construct foundation walls.

• Structural construction: B...read more
Answered by AI
Add your answer
Q2. Brief about your past work experience and challenges you faced during and solutions you came out with and learns from those mistakes.
Add your answer
Q3. What is your salary expectation
Add your answer

Q1. All technical equipment
Add your answer
Q2. All SOP And AMC
Add your answer
Q3. DG sets and oil type transformer and dry type transformer.
Add your answer
Q4. Firefiting systems and STP and WTP plat
Add your answer

Q1. All technical equipment
Add your answer
Q2. WTP and STP and fire
Add your answer