Add office photos
i
Filter interviews by
Gulf Asia Engineering And Projects Interview Questions, Process, and Tips
Top Gulf Asia Engineering And Projects Interview Questions and Answers
- Q1. What is the difference between SS(STAINLESS STEEL)and MSasked in Graduate Engineer Trainee (Get) interview
- Q2. In A condition of Fault What's Your Response and how you handle it ?asked in Junior Engineer interview
- Q3. fundamentals in electrical types of transformer construction substation equipmentsasked in Electrical Engineer interview
Gulf Asia Engineering And Projects Interview Experiences
7 interviews found
I applied via Campus Placement and was interviewed in Oct 2024. There were 2 interview rounds.
Basic aptitude questions
(1 Question)
- Q1. Fundamentals in electrical types of transformer construction substation equipments
- Ans.
Types of transformer construction and substation equipments are fundamental in electrical engineering.
Types of transformer construction include core type, shell type, and winding type.
Substation equipments include circuit breakers, transformers, busbars, and insulators.
Different types of transformers are used in substations based on voltage levels and power requirements.
Interview Preparation Tips
- Transmission and distribution
- Transformers
Electrical Engineer Interview Questions asked at other Companies
(2 Questions)
- Q1. What is the difference between SS(STAINLESS STEEL)and MS
- Ans.
SS (Stainless Steel) is a corrosion-resistant alloy made of iron, chromium, and other elements, while MS (Mild Steel) is a carbon steel with low carbon content.
SS is more corrosion-resistant than MS
SS contains chromium and other elements, while MS is primarily made of iron and carbon
SS is more expensive than MS
SS is commonly used in applications where corrosion resistance is important, such as in kitchen appliances or ...
- Q2. What is the difference between destructive and non destructive test
- Ans.
Destructive tests involve damaging the material being tested, while non-destructive tests do not damage the material.
Destructive tests involve breaking or damaging the material to analyze its properties, such as tensile strength or hardness.
Non-destructive tests use methods like ultrasound, X-rays, or visual inspection to evaluate the material without causing any damage.
Examples of destructive tests include tensile tes...
(2 Questions)
- Q1. What about your ambition
- Q2. What about your family, etc
Graduate Engineer Trainee (Get) Interview Questions asked at other Companies
I applied via campus placement at Amrita Institute of Technology & Science, Coimbatore and was interviewed in Feb 2024. There were 3 interview rounds.
Basics of aptitude and basics of mechanical engineering questions
(2 Questions)
- Q1. Why do u wanna join Gulf asia?
- Ans.
I want to join Gulf Asia because of its reputation for innovation and growth opportunities in the engineering field.
Gulf Asia is known for its cutting-edge projects and innovative solutions in the engineering industry.
I believe working at Gulf Asia will provide me with valuable experience and opportunities for professional growth.
The company's strong presence in the region and commitment to excellence align with my car...
- Q2. Some technical questions
(2 Questions)
- Q1. Are u ready to relocate?
- Ans.
Yes, I am open to relocating for the right opportunity.
I am willing to relocate for career growth and new experiences.
I have relocated in the past for job opportunities and have found it to be a positive experience.
I understand the importance of being flexible and adaptable in the engineering field.
- Q2. Some technical questions
Junior Engineer Interview Questions asked at other Companies
I applied via Campus Placement and was interviewed in Feb 2024. There were 2 interview rounds.
Technical and general aptitude
(2 Questions)
- Q1. General electrical qns
- Q2. Insulation and dielectric differencewhere asked
Electrical GET Interview Questions asked at other Companies
Gulf Asia Engineering And Projects interview questions for popular designations
Selected
I applied via Campus Placement and was interviewed in Aug 2023. There were 3 interview rounds.
The Questions were moderate level neither hard or Easy
(4 Questions)
- Q1. Draw OLD of Power System ?
- Ans.
An OLD of a power system is a one-line diagram that shows the electrical components and their connections in a simplified manner.
An OLD typically includes generators, transformers, circuit breakers, and other key components.
It shows the flow of electricity from the power source to the loads.
Symbols are used to represent different components and their connections.
It helps engineers understand the overall layout and oper...
- Q2. In A condition of Fault What's Your Response and how you handle it ?
- Ans.
I would immediately assess the situation, identify the root cause of the fault, and take necessary steps to rectify it to ensure minimal impact on operations.
Stay calm and assess the situation to understand the extent of the fault.
Identify the root cause of the fault by analyzing relevant data and conducting troubleshooting.
Take necessary steps to rectify the fault promptly to minimize downtime and impact on operations...
- Q3. Questions From internship and Major Projects.
- Q4. Most of Questions were from Power System and Electrical Machines.
(2 Questions)
- Q1. Discussion About the Working Condition.
- Q2. Basic Introduction about myself and Family Members
Interview Preparation Tips
Junior Engineer Interview Questions asked at other Companies
(2 Questions)
- Q1. Form factor, internship
- Q2. Difference between insulator and di electric
- Ans.
Insulators are materials that resist the flow of electric current, while dielectrics are insulating materials that can be polarized by an electric field.
Insulators prevent the flow of electric current through them, while dielectrics can store electrical energy when subjected to an electric field.
Insulators have high resistivity, while dielectrics have high permittivity.
Examples of insulators include glass, rubber, and ...
Electrical GET Interview Questions asked at other Companies
Jobs at Gulf Asia Engineering And Projects
Selected
I applied via Recruitment Consulltant and was interviewed before May 2023. There was 1 interview round.
(1 Question)
- Q1. Experience Based and critical task care
Quantity Surveyor Interview Questions asked at other Companies
Top trending discussions
Interview questions from similar companies
Selected
Quantitative reasoning
(5 Questions)
- Q1. About yourself and past experiences.
- Q2. Managerial round
- Q3. About company information
- Q4. About yourself and extracurricular activities
- Q5. See yourself in the next 5 yrs
Interview Preparation Tips
Associate Checker Interview Questions & Answers
Cadeploy Engineering
Anonymous
posted on 30 Dec 2024
Selected
I applied via Company Website and was interviewed in Nov 2024. There was 1 interview round.
(2 Questions)
- Q1. What are the OSHA standards applicable to building construction?
- Ans.
OSHA standards applicable to building construction include fall protection, hazard communication, scaffolding safety, and electrical safety.
Fall protection requirements include guardrails, safety nets, and personal fall arrest systems.
Hazard communication standards require employers to provide information about hazardous chemicals used on site.
Scaffolding safety regulations cover proper construction, use, and maintenan...
- Q2. What are the AISC codes applicable to steel structures?
- Ans.
AISC codes applicable to steel structures include AISC 360 for design of structural steel buildings and AISC 341 for seismic design.
AISC 360 - Specification for Structural Steel Buildings
AISC 341 - Seismic Provisions for Structural Steel Buildings
Electrical Engineer Interview Questions & Answers
VIKRAN Engineering & Exim
Anonymous
posted on 22 Dec 2024
(2 Questions)
- Q1. What is the output voltage of an AAAC Rabbit conductor?
- Ans.
The output voltage of an AAAC Rabbit conductor is typically around 600 volts.
The output voltage of an AAAC Rabbit conductor is usually around 600 volts.
The exact output voltage may vary depending on the specific application and conditions.
It is important to consult the manufacturer's specifications for accurate information.
- Q2. What is your execution work plan?
- Ans.
My execution work plan involves setting clear goals, creating a timeline, assigning tasks, monitoring progress, and adjusting as needed.
Set clear goals and objectives for the project
Create a detailed timeline with milestones and deadlines
Assign tasks to team members based on their strengths and expertise
Regularly monitor progress and make adjustments as needed
Communicate effectively with team members and stakeholders
Ut...
Interview Preparation Tips
Gulf Asia Engineering And Projects Interview FAQs
Some of the top questions asked at the Gulf Asia Engineering And Projects interview -
Tell us how to improve this page.
Gulf Asia Engineering And Projects Interviews By Designations
- Gulf Asia Engineering And Projects Electrical GET Interview Questions
- Gulf Asia Engineering And Projects Junior Engineer Interview Questions
- Gulf Asia Engineering And Projects Electrical Engineer Interview Questions
- Gulf Asia Engineering And Projects Graduate Engineer Trainee (Get) Interview Questions
- Gulf Asia Engineering And Projects Quantity Surveyor Interview Questions
Interview Questions for Popular Designations
Gulf Asia Engineering And Projects Interview Process
based on 9 interviews
Interview experience
Interview Questions from Similar Companies
Fast track your campus placements
Gulf Asia Engineering And Projects Reviews and Ratings
based on 13 reviews
Rating in categories
|
Quantity Surveyor
6
salaries
|  ₹4.2 L/yr - ₹9 L/yr |
|
Senior Quantity Surveyor
4
salaries
| ₹9 L/yr - ₹19 L/yr |
|
Graduate Engineer
3
salaries
| ₹3.6 L/yr - ₹3.6 L/yr |
|
Senior Manager
3
salaries
| ₹23 L/yr - ₹29 L/yr |
|
Procurement Engineer
3
salaries
| ₹10 L/yr - ₹10.8 L/yr |
Larsen & Toubro Limited
Tata Projects
Shapoorji Pallonji Group
Hindustan Construction Company
- Home >
- Interviews >
- Gulf Asia Engineering And Projects Interview Questions
