AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
i
Filter interviews by
Gulf Asia Engineering And Projects Interview Questions and Answers
6 Interview questions
An OLD of a power system is a one-line diagram that shows the electrical components and their connections in a simplified manner.
An OLD typically includes generators, transformers, circuit breakers, and other key components.
It shows the flow of electricity from the power source to the loads.
Symbols are used to represent different components and their connections.
It helps engineers understand the overall layout and...
I would immediately assess the situation, identify the root cause of the fault, and take necessary steps to rectify it to ensure minimal impact on operations.
Stay calm and assess the situation to understand the extent of the fault.
Identify the root cause of the fault by analyzing relevant data and conducting troubleshooting.
Take necessary steps to rectify the fault promptly to minimize downtime and impact on opera...
Destructive tests involve damaging the material being tested, while non-destructive tests do not damage the material.
Destructive tests involve breaking or damaging the material to analyze its properties, such as tensile strength or hardness.
Non-destructive tests use methods like ultrasound, X-rays, or visual inspection to evaluate the material without causing any damage.
Examples of destructive tests include tensil...
SS (Stainless Steel) is a corrosion-resistant alloy made of iron, chromium, and other elements, while MS (Mild Steel) is a carbon steel with low carbon content.
SS is more corrosion-resistant than MS
SS contains chromium and other elements, while MS is primarily made of iron and carbon
SS is more expensive than MS
SS is commonly used in applications where corrosion resistance is important, such as in kitchen appliance...
Insulators are materials that resist the flow of electric current, while dielectrics are insulating materials that can be polarized by an electric field.
Insulators prevent the flow of electric current through them, while dielectrics can store electrical energy when subjected to an electric field.
Insulators have high resistivity, while dielectrics have high permittivity.
Examples of insulators include glass, rubber,...
Types of transformer construction and substation equipments are fundamental in electrical engineering.
Types of transformer construction include core type, shell type, and winding type.
Substation equipments include circuit breakers, transformers, busbars, and insulators.
Different types of transformers are used in substations based on voltage levels and power requirements.
Gulf Asia Engineering And Projects Interview Experiences
7 interviews found
I applied via Campus Placement and was interviewed in Oct 2024. There were 2 interview rounds.
Basic aptitude questions
(1 Question)
- Q1. Fundamentals in electrical types of transformer construction substation equipments
- Ans.
Types of transformer construction and substation equipments are fundamental in electrical engineering.
Types of transformer construction include core type, shell type, and winding type.
Substation equipments include circuit breakers, transformers, busbars, and insulators.
Different types of transformers are used in substations based on voltage levels and power requirements.
Interview Preparation Tips
- Transmission and distribution
- Transformers
(2 Questions)
- Q1. What is the difference between SS(STAINLESS STEEL)and MS
- Ans.
SS (Stainless Steel) is a corrosion-resistant alloy made of iron, chromium, and other elements, while MS (Mild Steel) is a carbon steel with low carbon content.
SS is more corrosion-resistant than MS
SS contains chromium and other elements, while MS is primarily made of iron and carbon
SS is more expensive than MS
SS is commonly used in applications where corrosion resistance is important, such as in kitchen appliances or ...
- Q2. What is the difference between destructive and non destructive test
- Ans.
Destructive tests involve damaging the material being tested, while non-destructive tests do not damage the material.
Destructive tests involve breaking or damaging the material to analyze its properties, such as tensile strength or hardness.
Non-destructive tests use methods like ultrasound, X-rays, or visual inspection to evaluate the material without causing any damage.
Examples of destructive tests include tensile tes...
(2 Questions)
- Q1. What about your ambition
- Q2. What about your family, etc
- Ans.
I come from a close-knit family that values education, support, and shared experiences, fostering strong bonds among us.
My parents are both educators, instilling a love for learning in my siblings and me.
I have two siblings; my older sister is a doctor, and my younger brother is studying engineering.
We enjoy family gatherings, especially during holidays, where we share stories and laughter.
Our family traditions include...
I applied via Campus Placement and was interviewed in Feb 2024. There were 3 interview rounds.
Basics of aptitude and basics of mechanical engineering questions
(2 Questions)
- Q1. Why do u wanna join Gulf asia?
- Ans.
I want to join Gulf Asia because of its reputation for innovation and growth opportunities in the engineering field.
Gulf Asia is known for its cutting-edge projects and innovative solutions in the engineering industry.
I believe working at Gulf Asia will provide me with valuable experience and opportunities for professional growth.
The company's strong presence in the region and commitment to excellence align with my car...
- Q2. Some technical questions
(2 Questions)
- Q1. Are u ready to relocate?
- Ans.
Yes, I am open to relocating for the right opportunity.
I am willing to relocate for career growth and new experiences.
I have relocated in the past for job opportunities and have found it to be a positive experience.
I understand the importance of being flexible and adaptable in the engineering field.
- Q2. Some technical questions
I applied via Campus Placement and was interviewed in Feb 2024. There were 2 interview rounds.
Technical and general aptitude
(2 Questions)
- Q1. General electrical qns
- Q2. Insulation and dielectric differencewhere asked
Selected
I applied via Campus Placement and was interviewed in Aug 2023. There were 3 interview rounds.
The Questions were moderate level neither hard or Easy
(4 Questions)
- Q1. Draw OLD of Power System ?
- Ans.
An OLD of a power system is a one-line diagram that shows the electrical components and their connections in a simplified manner.
An OLD typically includes generators, transformers, circuit breakers, and other key components.
It shows the flow of electricity from the power source to the loads.
Symbols are used to represent different components and their connections.
It helps engineers understand the overall layout and oper...
- Q2. In A condition of Fault What's Your Response and how you handle it ?
- Ans.
I would immediately assess the situation, identify the root cause of the fault, and take necessary steps to rectify it to ensure minimal impact on operations.
Stay calm and assess the situation to understand the extent of the fault.
Identify the root cause of the fault by analyzing relevant data and conducting troubleshooting.
Take necessary steps to rectify the fault promptly to minimize downtime and impact on operations...
- Q3. Questions From internship and Major Projects.
- Q4. Most of Questions were from Power System and Electrical Machines.
(2 Questions)
- Q1. Discussion About the Working Condition.
- Q2. Basic Introduction about myself and Family Members
Interview Preparation Tips
(2 Questions)
- Q1. Form factor, internship
- Q2. Difference between insulator and di electric
- Ans.
Insulators are materials that resist the flow of electric current, while dielectrics are insulating materials that can be polarized by an electric field.
Insulators prevent the flow of electric current through them, while dielectrics can store electrical energy when subjected to an electric field.
Insulators have high resistivity, while dielectrics have high permittivity.
Examples of insulators include glass, rubber, and ...
Selected
I applied via Recruitment Consulltant and was interviewed before May 2023. There was 1 interview round.
(1 Question)
- Q1. Experience Based and critical task care
Top trending discussions
Interview questions from similar companies
Electrical GET Interview Questions & Answers
VIKRAN Engineering & Exim
Anonymous
posted on 12 Mar 2025
Selected
I appeared for an interview before Mar 2024.
(1 Question)
- Q1. Circuit daigrams
I applied via Referral and was interviewed before Feb 2020. There were 3 interview rounds.
Interview Questionnaire
2 Questions
- Q1. Are you committed to be in project till project completion
- Q2. Can you handel multi dimenssional assignment
- Ans.
Yes, I have experience in handling multi-dimensional assignments.
I have previously managed a team with diverse skill sets and responsibilities.
I am comfortable with delegating tasks and ensuring timely completion.
I have a strong understanding of project management and resource allocation.
I am adept at prioritizing tasks and managing multiple projects simultaneously.
Interview Preparation Tips
Skills evaluated in this interview
Assistant Manager Interview Questions & Answers
VIKRAN Engineering & Exim
HARI BYSANI PMP
posted on 24 Mar 2022
I applied via Walk-in and was interviewed before Mar 2021. There were 2 interview rounds.
(1 Question)
- Q1. As attendance for “Mid Management level designation “ Just asks about my Experience. Not much Technical points highlighted except few Manager level Questions (general points not much technically projected)...
Interview Preparation Tips
- Nothing required.
Gulf Asia Engineering And Projects Interview FAQs
Some of the top questions asked at the Gulf Asia Engineering And Projects interview -
Tell us how to improve this page.
Gulf Asia Engineering And Projects Interviews By Designations
- Gulf Asia Engineering And Projects Electrical GET Interview Questions
- Gulf Asia Engineering And Projects Junior Engineer Interview Questions
- Gulf Asia Engineering And Projects Electrical Engineer Interview Questions
- Gulf Asia Engineering And Projects Graduate Engineer Trainee (Get) Interview Questions
- Gulf Asia Engineering And Projects Quantity Surveyor Interview Questions
Interview Questions for Popular Designations
Overall Interview Experience Rating
based on 9 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
Gulf Asia Engineering And Projects Reviews and Ratings
based on 19 reviews
Rating in categories
|
Quantity Surveyor
12
salaries
|  ₹4.2 L/yr - ₹8.6 L/yr |
|
Senior Quantity Surveyor
4
salaries
| ₹9 L/yr - ₹21 L/yr |
|
Junior Quantity Surveyor
4
salaries
| ₹4.2 L/yr - ₹5.3 L/yr |
|
Graduate Engineer Trainee (Get)
4
salaries
| ₹3 L/yr - ₹3.6 L/yr |
|
Graduate Engineer
3
salaries
| ₹3.6 L/yr - ₹3.6 L/yr |
Lea Associates South Asia
R.V.R. PROJECTS
ABCI Infrastructures
VIKRAN Engineering & Exim
- Home >
- Interviews >
- Gulf Asia Engineering And Projects Interview Questions
